Materials Science and Engineering/Mechanical Engineering Joint Major

This is an archived copy of the 2019-20 guide. To access the most recent version of the guide, please visit http://guide.berkeley.edu.

Spring 2020 COVID-19 Measures

About the Program

Bachelor of Science (BS)

The joint major programs are designed for students who wish to undertake study in two areas of engineering in order to qualify for employment in either field or for positions in which competence in two fields is required. These curricula include the core courses in each of the major fields. While they require slightly increased course loads, they can be completed in four years.

Students interested in the mechanical behavior of materials have the option of pursuing a joint major in Materials Science and Engineering and Mechanical Engineering. The curriculum addresses key fundamentals of both disciplines, preparing students in materials selection and design for structural and functional applications. Students completing this joint major enter professional positions in the aerospace, automotive, energy, and manufacturing industries, along with many others.

Admission to the Joint Major

Admission directly to a joint major is closed to freshmen and junior transfer applicants. Students interested in a joint program may apply to change majors during specific times in their academic progress. Please see the College of Engineering joint majors website for complete details.

Visit Department Website

Major Requirements

In addition to the University, campus, and college requirements, students must fulfill the below requirements specific to their major program.

General Guidelines

All technical courses taken in satisfaction of major requirements must be taken for a letter grade.
No more than one upper division course may be used to simultaneously fulfill requirements for a student’s major and minor programs.
A minimum overall grade point average (GPA) of 2.0 is required for all work undertaken at UC Berkeley.
A minimum GPA of 2.0 is required for all technical courses taken in satisfaction of major requirements.

For information regarding residence requirements and unit requirements, please see the College Requirements tab.

For a detailed plan of study by year and semester, please see the Plan of Study tab.

Lower Division Requirements

Course List
Code	Title	Units
MATH 1A	Calculus	4
MATH 1B	Calculus	4
MATH 53	Multivariable Calculus	4
MATH 54	Linear Algebra and Differential Equations	4
CHEM 1A & 1AL	General Chemistry and General Chemistry Laboratory ¹	4
or CHEM 4A	General Chemistry and Quantitative Analysis
PHYSICS 7A	Physics for Scientists and Engineers	4
PHYSICS 7B	Physics for Scientists and Engineers	4
ENGIN 7	Introduction to Computer Programming for Scientists and Engineers	4
ENGIN 25	Visualization for Design	2
ENGIN 26	Three-Dimensional Modeling for Design	2
ENGIN 27	Introduction to Manufacturing and Tolerancing	2
MAT SCI 45	Properties of Materials	3
MAT SCI 45L	Properties of Materials Laboratory	1
MEC ENG 40	Thermodynamics	3
MEC ENG C85	Introduction to Solid Mechanics	3

CHEM 4A is intended for students majoring in chemistry or a closely related field.

Upper Division Requirements

Course List
Code	Title	Units
MEC ENG 100	Electronics for the Internet of Things	4
or PHYSICS 111A	Instrumentation Laboratory
MEC ENG 102B	Mechatronics Design	4
MEC ENG 103	Experimentation and Measurements	4
MEC ENG 104	Engineering Mechanics II	3
MEC ENG 106	Fluid Mechanics	3
MEC ENG 108	Mechanical Behavior of Engineering Materials	3-4
or MAT SCI 113	Mechanical Behavior of Engineering Materials
MEC ENG 109	Heat Transfer	3
MEC ENG 132	Dynamic Systems and Feedback	3
MAT SCI 102	Bonding, Crystallography, and Crystal Defects	3
MAT SCI 103	Phase Transformations and Kinetics	3
MAT SCI 104	Materials Characterization	4
MAT SCI 112	Corrosion (Chemical Properties)	3
MAT SCI 130	Experimental Materials Science and Design	3
Upper division technical electives: minimum 9 units to include: ^1,2		9
At least 3 units of MAT SCI 12x (from the 120 series)
At least 6 units of upper division MEC ENG courses, one of which must be a design elective chosen from: MEC ENG 101, MEC ENG 110, MEC ENG C117, MEC ENG 119, MEC ENG 130, MEC ENG 135, MEC ENG 146, MEC ENG 165, MEC ENG C176, MEC ENG C178, ENGIN 128

Students may receive up to three units of technical elective credit for work on a research project in MEC ENG H194 or MEC ENG 196. Other letter-graded research courses may be approved by petition.

Technical electives cannot include any course taken on a Pass/No Pass basis or MEC ENG 191K.

College Requirements

Students in the College of Engineering must complete no fewer than 120 semester units with the following provisions:

Completion of the requirements of one engineering major program study.
A minimum overall grade point average of 2.00 (C average) and a minimum 2.00 grade point average in upper division technical coursework required of the major.
The final 30 units and two semesters must be completed in residence in the College of Engineering on the Berkeley campus.
All technical courses (math, science and engineering) that can fulfill requirements for the student's major must be taken on a letter graded basis (unless they are only offered P/NP).
Entering freshmen are allowed a maximum of eight semesters to complete their degree requirements. Entering junior transfers are allowed a maximum of four semesters to complete their degree requirements. (Note: junior transfers admitted missing three or more courses from the lower division curriculum are allowed five semesters.) Summer terms are optional and do not count toward the maximum. Students are responsible for planning and satisfactorily completing all graduation requirements within the maximum allowable semesters.
Adhere to all college policies and procedures as they complete degree requirements.
Complete the lower division program before enrolling in upper division engineering courses.

Humanities and Social Sciences (H/SS) Requirement

To promote a rich and varied educational experience outside of the technical requirements for each major, the College of Engineering has a six-course Humanities and Social Sciences breadth requirement, which must be completed to graduate. This requirement, built into all the engineering programs of study, includes two reading and composition courses (R&C), and four additional courses within which a number of specific conditions must be satisfied. Follow these guidelines to fulfill this requirement:

Complete a minimum of six courses from the approved Humanities/Social Sciences (H/SS) lists.
Courses must be a minimum of 3 semester units (or 4 quarter units).
Two of the six courses must fulfill the College's Reading and Composition (R&C) requirement. These courses must be taken for a letter grade (C- or better required). The first half (R&C Part A) must be completed by the end of the freshman year; the second half (R&C Part B) must be completed by no later than the end of the sophomore year. Please see the Reading and Composition Requirement page for a complete list of R&Cs available and a list of exams that can be applied toward the R&C Part A requirement. Students can also use the Class Schedule to view R&C courses offered in a given semester. Note: Only R&C Part A can be fulfilled with an AP, IB, or A-Level exam score. Test scores do not fulfill R&C Part B for College of Engineering students.
The four additional courses must be chosen from the five areas listed in #13 below. These four courses may be taken on a pass/no pass basis.
Special topics courses of 3 semester units or more will be reviewed on a case-by-case basis.
Two of the six courses must be upper division (courses numbered 100-196).
One of the six courses must satisfy the campus American Cultures (AC) requirement. Note that any American Cultures course of 3 units or more may be used to meet H/SS
A maximum of two exams (Advanced Placement, International Baccalaureate, or A-Level) may be used toward completion of the H/SS requirement. View the list of exams that can be applied toward H/SS requirements.
No courses offered by any engineering department other than BIO ENG 100, COMPSCI C79, ENGIN 125, ENGIN 157AC, ENGIN 185, and MEC ENG 191K may be used to complete H/SS requirements.
Language courses may be used to complete H/SS requirements. View the list of language options.
Courses may fulfill multiple categories. For example, CY PLAN 118AC satisfies both the American Cultures requirement and one upper division H/SS requirement.
Courses numbered 97, 98, 99, or above 196 may not be used to complete any H/SS requirement.
The College of Engineering uses modified versions of five of the College of Letters and Science (L&S) breadth requirements lists to provide options to our students for completing the H/SS requirement. The five areas are:

Arts and Literature
Historical Studies
International Studies
Philosophy and Values
Social and Behavioral Sciences

Within the guidelines above, choose courses from any of the Breadth areas listed above. (Please note that you cannot use courses on the Biological Science or Physical Science Breadth list to complete the H/SS requirement.) To find course options, go to the Class Schedule , select the term of interest, and use the Breadth Requirements filter.

Class Schedule Requirements

Minimum units per semester: 12.0
Maximum units per semester: 20.5
Minimum technical courses: College of Engineering undergraduates must enroll each semester in no fewer than two technical courses (of a minimum of 3 units each, with the exception of Engineering 25, 26 and 27) required of the major program of study in which the student is officially declared. (Note: For most majors, normal progress will require enrolling in 3-4 technical courses each semester). Students who are not in compliance with this policy by the end of the fifth week of the semester are subject to a registration block that will delay enrollment for the following semester.
All technical courses (math, science, engineering) that satisfy requirements for the major must be taken on a letter-graded basis (unless only offered as P/NP).

Minimum Academic (Grade) Requirements

A minimum overall and semester grade point average of 2.00 (C average) is required of engineering undergraduates. Students will be subject to dismissal from the University if during any fall or spring semester their overall UC GPA falls below a 2.00, or their semester GPA is less than 2.00.
Students must achieve a minimum grade point average of 2.00 (C average) in upper division technical courses required for the major curriculum each semester.
A minimum overall grade point average of 2.00, and a minimum 2.00 grade point average in upper division technical course work required for the major is needed to earn a Bachelor of Science in Engineering.

Unit Requirements

To earn a Bachelor of Science in Engineering, students must complete at least 120 semester units of courses subject to certain guidelines:

Completion of the requirements of one engineering major program of study.
A maximum of 16 units of special studies coursework (courses numbered 97, 98, 99, 197, 198, or 199) is allowed towards B.S. degree, and no more than 4 units in any single term can be counteds.
A maximum of 4 units of physical education from any school attended will count towards the 120 units.
Passed (P) grades may account for no more than one third of the total units completed at UC Berkeley, Fall Program for Freshmen (FPF), UC Education Abroad Program (UCEAP), or UC Berkeley Washington Program (UCDC) toward the 120 overall minimum unit requirement. Transfer credit is not factored into the limit. This includes transfer units from outside of the UC system, other UC campuses, credit-bearing exams, as well as UC Berkeley Extension XB units.

Normal Progress

Students in the College of Engineering must enroll in a full-time program and make normal progress each semester toward the bachelor's degree. The continued enrollment of students who fail to achieve minimum academic progress shall be subject to the approval of the dean. (Note: Students with official accommodations established by the Disabled Students' Program, with health or family issues, or with other reasons deemed appropriate by the dean may petition for an exception to normal progress rules.)

UC and Campus Requirements

University of California Requirements

Entry Level Writing

All students who will enter the University of California as freshmen must demonstrate their command of the English language by fulfilling the Entry Level Writing Requirement. Satisfaction of this requirement is also a prerequisite to enrollment in all Reading and Composition courses at UC Berkeley.

American History and American Institutions

The American History and Institutions requirements are based on the principle that a U.S. resident graduated from an American university should have an understanding of the history and governmental institutions of the United States.

Campus Requirement

American Cultures

The American Cultures requirement is a Berkeley campus requirement, one that all undergraduate students at Berkeley need to pass in order to graduate. You satisfy the requirement by passing, with a grade not lower than C- or P, an American Cultures course. You may take an American Cultures course any time during your undergraduate career at Berkeley. The requirement was instituted in 1991 to introduce students to the diverse cultures of the United States through a comparative framework. Courses are offered in more than fifty departments in many different disciplines at both the lower and upper division level.

The American Cultures requirement and courses constitute an approach that responds directly to the problem encountered in numerous disciplines of how better to present the diversity of American experience to the diversity of American students whom we now educate.

Faculty members from many departments teach American Cultures courses, but all courses have a common framework. The courses focus on themes or issues in United States history, society, or culture; address theoretical or analytical issues relevant to understanding race, culture, and ethnicity in American society; take substantial account of groups drawn from at least three of the following: African Americans, indigenous peoples of the United States, Asian Americans, Chicano/Latino Americans, and European Americans; and are integrative and comparative in that students study each group in the larger context of American society, history, or culture.

This is not an ethnic studies requirement, nor a Third World cultures requirement, nor an adjusted Western civilization requirement. These courses focus upon how the diversity of America's constituent cultural traditions have shaped and continue to shape American identity and experience.

Visit the Class Schedule or the American Cultures website for the specific American Cultures courses offered each semester. For a complete list of approved American Cultures courses at UC Berkeley and California Community Colleges, please see the American Cultures Subcommittee’s website. See your academic adviser if you have questions about your responsibility to satisfy the American Cultures breadth requirement.

Plan of Study

For more detailed information regarding the courses listed below (e.g., elective information, GPA requirements, etc.), please see the College Requirements and Major Requirements tabs.

Freshman
Fall	Units	Spring	Units
CHEM 4A or 1A and 1AL¹	4	MATH 1B	4
MATH 1A	4	PHYSICS 7A	4
ENGIN 25	2	ENGIN 7	4
Reading & Composition Part A Course⁴	4	Reading & Composition Part B Course⁴	4
Optional Freshman Seminar or ENGIN 92	0-1	Optional Freshman Seminar	0-1
	14-15		16-17
Sophomore
Fall	Units	Spring	Units
MATH 53	4	MATH 54	4
PHYSICS 7B	4	MEC ENG 40	3
ENGIN 26	2	MEC ENG C85	3
ENGIN 27	2	Humanities/Social Sciences course⁴	3-4
MAT SCI 45	3
MAT SCI 45L	1
	16		13-14
Junior
Fall	Units	Spring	Units
MEC ENG 104	3	MEC ENG 100 or PHYSICS 111A	4
MEC ENG 106	3	MEC ENG 109	3
MEC ENG 108 or MAT SCI 113	3-4	MEC ENG 132	3
MAT SCI 102	3	MAT SCI 103	3
Humanities/Social Sciences course⁴	3-4	MAT SCI 104	4
	15-17		17
Senior
Fall	Units	Spring	Units
MEC ENG 103	4	MEC ENG 102B	4
MAT SCI 130	3	MAT SCI 112	3
Technical Electives^2,3	6	Technical Elective^2,3	3
Humanities/Social Sciences course⁴	3-4	Humanities/Social Sciences course⁴	3-4
	16-17		13-14
Total Units: 120-127

CHEM 4A is intended for students majoring in chemistry or a closely-related field.

A total of 9 upper-division technical elective units are required. These must include 6 units of upper-division Mechanical Engineering courses, one of which must be from the following list: ENGIN 128, MEC ENG 101, MEC ENG 110, MEC ENG C117, MEC ENG 119, MEC ENG 130, MEC ENG 135, MEC ENG 146, MEC ENG 165, MEC ENG C176, MEC ENG C178. In addition, 3 units must be from the MAT SCI 120 series. Students may receive up to 3 units of technical elective credit for work on a research project in MEC ENG H194 or MEC ENG 196. Other letter-graded research courses may be approved by petition.

Technical Electives cannot include any course taken on a Pass/No Pass basis or MEC ENG 191K.

⁴

The Humanities/Social Sciences (H/SS) requirement includes two approved Reading & Composition (R&C) courses and four additional approved courses, with which a number of specific conditions must be satisfied. R&C courses must be taken for a letter grade (C- or better required). The first half (R&C Part A) must be completed by the end of the freshman year; the second half (R&C Part B) must be completed by no later than the end of the sophomore year. The remaining courses may be taken at any time during the program. See engineering.berkeley.edu/hss for complete details and a list of approved courses.

Student Learning Goals

Materials Science

MEASURED CURRICULAR OUTCOMES

The program is designed around a set of curricular outcomes.

Be able to apply general math, science and engineering skills to the solution of engineering problems.
Be aware of the social, safety and environmental consequences of their work, and be able to engage in public debate regarding these issues.
Be able to apply core concepts in materials science to solve engineering problems.
Be knowledgeable of contemporary issues relevant to materials science and engineering.
Be able to select materials for design and construction.
Understand the importance of life-long learning.
Be able to design and conduct experiments, and to analyze data.
Understand the professional and ethical responsibilities of a materials scientist and engineer.
Be able to work both independently and as part of a team.
Be able to communicate effectively while speaking, employing graphics, and writing.
Possess the skills and techniques necessary for modern materials engineering practice.

EDUCATIONAL OBJECTIVES FOR GRADUATES

Stated succinctly, graduates from the program will have the following skills:

Know the fundamental science and engineering principles relevant to materials.
Understand the relationship between nano/microstructure, characterization, properties and processing, and design of materials.
Have the experimental and computational skills for a professional career or graduate study in materials.
Possess a knowledge of the significance of research, the value of continued learning, and environmental/social issues surrounding materials.
Be able to communicate effectively, to work in teams and to assume positions as leaders.

Be able to communicate effectively, to work in teams and to assume positions as leaders.

Mechanical Engineering

Learning Goals

The objectives of the Mechanical Engineering undergraduate program are to produce graduates who do the following:

Vigorously engage in post-baccalaureate endeavors, whether in engineering graduate study, in engineering practice, or in the pursuit of other fields such as science, law, medicine, business or public policy.
Apply their mechanical engineering education to address the full range of technical and societal problems with creativity, imagination, confidence and responsibility.
Actively seek out positions of leadership within their profession and their community.
Serve as ambassadors for engineering by exhibiting the highest ethical and professional standards, and by communicating the importance and excitement of this dynamic field.
Retain the intellectual curiosity that motivates lifelong learning and allows for a flexible response to the rapidly evolving challenges of the 21st century.

Skills

Mechanical Engineering graduates have the following:

An ability to apply knowledge of mathematics, science, and engineering.
An ability to design and conduct experiments as well as to analyze and interpret data.
An ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability.
An ability to function on multi-disciplinary teams.
An ability to identify, formulate, and solve engineering problems.
An understanding of professional and ethical responsibility.
An ability to communicate effectively.
The broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context.
A recognition of the need for and an ability to engage in life-long learning.
A knowledge of contemporary issues.
An ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Materials Science and Engineering

Terms offered: Spring 2020, Spring 2019, Spring 2018
The Freshman Seminar Program has been designed to provide new students with the opportunity to explore an intellectual topic with a faculty member in a small seminar setting. Freshman seminars are offered in all campus departments, and topics vary from department to department and semester to semester. Enrollment limited to 20 freshmen.
Freshman Seminar: Read More [+]

Hours & Format

Fall and/or spring: 15 weeks - 1 hour of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Offered for pass/not pass grade only. Final exam required.

Freshman Seminar: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
Application of basic principles of physics and chemistry to the engineering properties of materials. Emphasis on establishing structure, property, processing, and performance interrelationships in metals, ceramics, and polymers. While core concepts are fully covered each semester, examples and contextualization in Fall editions focuses on metals, ceramics, and functional/electronic properties and in Spring editions on polymers and soft-materials.
Properties of Materials: Read More [+]

Rules & Requirements

Prerequisites: Students should have completed high school AP or honors chemistry and physics

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Martin, Messersmith

Properties of Materials: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
This course presents laboratory applications of the basic principles introduced in the lecture-based course MSE45 – Properties of Materials.
Properties of Materials Laboratory: Read More [+]

Rules & Requirements

Credit Restrictions: Students will receive no credit for MSE 45L after taking E45L

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of laboratory per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam not required.

Instructors: Martin, Messersmith

Properties of Materials Laboratory: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
Bonding in solids; classification of metals, semiconductors, and insulators; crystal systems; point, line, and planar defects in crystals; examples of crystallographic and defect analysis in engineering materials; relationship to physical and mechanical properties.
Bonding, Crystallography, and Crystal Defects: Read More [+]

Rules & Requirements

Prerequisites: MAT SCI 45

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Chrzan

Bonding, Crystallography, and Crystal Defects: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018
The nature, mechanisms, and kinetics of phase transformations and microstructural changes in the solid state. Atom diffusion in solids. Phase transformations through the nucleation and growth of new matrix or precipitate phases. Martensitic transformations, spinodal decomposition. The use of phase transformations to control microstructure.
Phase Transformations and Kinetics: Read More [+]

Rules & Requirements

Prerequisites: MAT SCI 102 and ENGIN 40

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Phase Transformations and Kinetics: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018
This 3-unit course will cover basic principles and techniques used for the characterization of engineering materials. The course is designed to introduce undergraduate students to the basic principles of structural, chemical and property characterization techniques. The course is grounded in modern x-ray diffraction and electron microscopy techniques for characterization of the chemical and structural properties of a material. The course introduces the fundamental theoretical framework for diffraction, spectrometry and imaging methods.
Materials Characterization: Read More [+]

Objectives & Outcomes

Course Objectives: Materials characterization lies at the heart of understanding the property-structure-processing relationships of materials. The goal of the course is to prepare undergraduate students from materials science to understand the basic principles behind material characterization tools and techniques. More specifically, this class will provide students (1) a thorough introduction to the principles and practice of diffraction, (2) introductory exposure to a range of common characterization methods for the determination of structure and composition of solids. A successful student will learn (1) the theory of x-ray and electron diffraction, (2) basic elements of electron microscopy, (3) basic aspects of optical and scanning probe techniques.

Rules & Requirements

Prerequisites: MAT SCI 102. A basic knowledge of structure, bonding and crystallography will be assumed

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Scott, Minor

Materials Characterization: Read Less [-]

Terms offered: Spring 2020
This 1-unit laboratory course covers X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), as well as lab writeup protocols and academic integrity. Students will get hands-on experience using the XRD, SEM and TEM equipment to perform microstructural characterization of materials. Students will also design and run their own project on a topic of their choosing.
Materials Characterization Laboratory: Read More [+]

Objectives & Outcomes

Course Objectives: Practical experience on the most common materials characterization equipment for structural and chemical analysis of materials. Introduction to laboratory procedures and independent projects.

Rules & Requirements

Prerequisites: MAT SCI 102; and MAT SCI 104 must be taken concurrently. A basic knowledge of structure, bonding and crystallography will be assumed. Undergraduate student in engineering, physics or chemistry

Hours & Format

Fall and/or spring: 15 weeks - 1.5 hours of laboratory and 1 hour of discussion per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam not required.

Instructors: Scott, Minor

Materials Characterization Laboratory: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018
Introduction to the physical principles underlying the electric properties of modern solids with emphasis on semiconductors; control of defects and impurities through physical purification, bulk and thin film crystal growth and doping processes, materials basis of electronic and optoelectronic devices (diodes, transistors, semiconductor lasers) and optical fibers; properties of metal and oxide superconductors and their applications.
Properties of Electronic Materials: Read More [+]

Rules & Requirements

Prerequisites: PHYSICS 7A, PHYSICS 7B, and PHYSICS 7C; or PHYSICS 7A, PHYSICS 7B and consent of instructor

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Dubon, Wu, Yao

Properties of Electronic Materials: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018
Electrochemical theory of corrosion. Mechanisms and rates in relation to physiochemical and metallurgical factors. Stress corrosion and mechanical influences on corrosion. Corrosion protection by design, inhibition, cathodic protection, and coatings.
Corrosion (Chemical Properties): Read More [+]

Rules & Requirements

Prerequisites: MAT SCI 45 and ENGIN 40

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Devine

Corrosion (Chemical Properties): Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
This course covers elastic and plastic deformation under static/dynamic loads. Prediction/prevention of failure by yielding, fracture, fatigue, wear and environmental effects are addressed. Design issues of materials selection for load-bearing applications are discussed. Case studies of engineering failures are presented. Topics include engineering materials, structure-property relationships, mechanical behavior of metals, ceramics, polymers and composites, complex stress/strain states, stress concentrations, multiaxial loading, plasticity, yield criteria, dislocations, strengthening mechanisms, creep, fracture mechanics and fatigue.
Mechanical Behavior of Engineering Materials: Read More [+]

Rules & Requirements

Prerequisites: CIV ENG C30/MEC ENG C85 and MAT SCI 45

Credit Restrictions: Students will receive no credit for 113 after taking C113 or Mechanical Engineering C124. Deficiency in C113 or Mechanical Engineering C124 maybe removed by taking 113.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Ritchie

Mechanical Behavior of Engineering Materials: Read Less [-]

Terms offered: Spring 2017, Spring 2011, Fall 2010
Introduction to the physical principles underlying the dielectric and magnetic properties of solids. Processing-microstructure-property relationships of dielectric materials, including piezoelectric, pryoelectric, and ferroelectric oxides, and of magnetic materials, including hard- and soft ferromagnets, ferrites and magneto-optic and -resistive materials. The course also covers the properties of grain boundary devices (including varistors) as well as ion-conducting and mixed conducting materials for applications in various devices such as sensors, fuel cells, and electric batteries.
Properties of Dielectric and Magnetic Materials: Read More [+]

Rules & Requirements

Prerequisites: PHYSICS 7A, PHYSICS 7B, and PHYSICS 7C; or PHYSICS 7A, PHYSICS 7B, and consent of instructor. MAT SCI 111 is recommended

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Properties of Dielectric and Magnetic Materials: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
This course is intended to give students the opportunity to expand their knowledge of topics related to biomedical materials selection and design. Structure-property relationships of biomedical materials and their interaction with biological systems will be addressed. Applications of the concepts developed include blood-materials compatibility, biomimetic materials, hard and soft tissue-materials interactions, drug delivery, tissue engineering, and biotechnology.
Biological Performance of Materials: Read More [+]

Objectives & Outcomes

Course Objectives: The course is separated into four parts spanning the principles of synthetic materials and surfaces, principles of biological materials, biological performance of materials and devices, and state-of-the-art materials design. Students are required to attend class and master the material therein. In addition, readings from the clinical, life and materials science literature are assigned. Students are encouraged to seek out additional reference material to complement the readings assigned. A mid-term examination is given on basic principles (parts 1 and 2 of the outline). A comprehensive final examination is given as well.
The purpose of this course is to introduce students to problems associated with the selection and function of biomaterials. Through class lectures and readings in both the physical and life science literature, students will gain broad knowledge of the criteria used to select biomaterials, especially in devices where the material-tissue or material-solution interface dominates performance. Materials used in devices for medicine, dentistry, tissue engineering, drug delivery, and the biotechnology industry will be addressed.

This course also has a significant design component (~35%). Students will form small teams (five or less) and undertake a semester-long design project related to the subject matter of the course. The project includes the preparation of a paper and a 20 minute oral presentation critically analyzing a current material-tissue or material-solution problem. Students will be expected to design improvements to materials and devices to overcome the problems identified in class with existing materials.

Student Learning Outcomes:
Apply math, science & engineering principles to the understanding of soft materials, surface chemistry, DLVO theory, protein adsorption kinetics, viscoelasticity, mass diffusion, and molecular (i.e., drug) delivery kinetics.

•
Design experiments and analyze data from the literature in the context of the class design project.
Apply core concepts in materials science to solve engineering problems related to the selection biomaterials, especially in devices where the material-tissue or material-solution interface dominates performance.
Develop an understanding of the social, safety and medical consequences of biomaterial use and regulatory issues associated with the selection of biomaterials in the context of the silicone breast implant controversy and subsequent biomaterials crisis.
Work independently and function on a team, and develop solid communication skills (oral, graphic & written) through the class design project.
•
Understanding of the origin of surface forces and interfacial free energy, and how they contribute to the development of the biomaterial interface and ultimately biomaterial performance.

Rules & Requirements

Prerequisites: MAT SCI 45 and BIO ENG 103. BIO ENG 102 and BIO ENG 104 are recommended

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Healy

Also listed as: BIO ENG C118

Biological Performance of Materials: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
Economic and technological significance of metals and other materials. Elementary geology (composition of lithosphere, mineralization). Short survey of mining and mineral processing techniques. Review of chemical thermodynamics and reaction kinetics. Principles of process engineering including material, heat, and mechanical energy balances. Elementary heat transfer, fluid flow, and mass transfer. Electrolytic production and refining of metals. Vapor techniques for production of metals and coatings.
Materials Production: Read More [+]

Rules & Requirements

Prerequisites: ENGIN 40, MEC ENG 40, CHM ENG 141, CHEM 120B, or equivalent thermodynamics course

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Materials Production: Read Less [-]

Terms offered: Spring 2019, Spring 2015, Spring 2014
The principles of metals processing with emphasis on the use of processing to establish microstructures which impart desirable engineering properties. The techniques discussed include solidification, thermal and mechanical processing, powder processing, welding and joining, and surface treatments.
Metals Processing: Read More [+]

Rules & Requirements

Prerequisites: MAT SCI 45

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Gronsky

Metals Processing: Read Less [-]

Terms offered: Fall 2012, Fall 2011, Fall 2010
Powder fabrication by grinding and chemical methods, rheological behavior of powder-fluid suspensions, forming methods, drying, sintering, and grain growth. Relation of processing steps to microstructure development.
Ceramic Processing: Read More [+]

Rules & Requirements

Prerequisites: MAT SCI 45 and ENGIN 40

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Ceramic Processing: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Fall 2018
This 4-unit course starts with a brief review of the fundamentals of solid-state physics including bands and defects in semiconductors and oxides, and then moves to bulk semiconductor crystals growth and processing including doping, diffusion and implantation, and then to thin film deposition and processing methods, and finishes with a discussion of materials analysis and characterization. Recent advances in nanomaterials research will also be introduced.
ELECTRONIC MATERIALS PROCESSING: Read More [+]

Objectives & Outcomes

Course Objectives: To prepare students a) for work in semiconductor processing facilities and b) for graduate studies related to thin film processing and relevant materials science topics.
To present the relevant materials science issues in semiconductor and oxide processing.
To provide an introduction into the principles of thin film processing and related technologies.

Student Learning Outcomes: Basic knowledge of gas kinetics and vacuum technology, including ideal gas, gas transport theory, definition, creation and measurement of vacuum.
Knowledge of electrical and optical properties of thin films.
Knowledge of the formation of p-n junction to explain the diode operation and its I-V characteristics. Understanding of the mechanisms of Hall Effect, transport, and C-V measurements, so that can calculate carrier concentration, mobility and conductivity given raw experimental data.
The ability to describe major growth techniques of bulk, thin film, and nanostructured semiconductors, with particular emphasis on thin film deposition technologies, including evaporation, sputtering, chemical vapor deposition and epitaxial growths.
To have basic knowledge of doping, purification, oxidation, gettering, diffusion, implantation, metallization, lithography and etching in semiconductor processing.
To have basic knowledge of electronic material characterization methods: x-ray diffraction, SEM and TEM, EDX, Auger, STM and AFM, Rutherford Back Scattering and SIMS, as well as optical methods including photoluminescence, absorption and Raman scattering.
To understand the concepts of bands, bandgap, to distinguish direct and indirect bandgap semiconductors. Understanding of free electron and hole doping of semiconductors to determine Fermi level position.
To understand the effect of defects in semiconductors, so that can describe their electronic and optical behaviors, and the methods to eliminate and control them in semiconductors.

Rules & Requirements

Prerequisites: MAT SCI 111, PHYSICS 7C, or consent of instructor

Hours & Format

Fall and/or spring: 15 weeks - 4 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Wu, Yao

ELECTRONIC MATERIALS PROCESSING: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Spring 2016
Deposition, processing, and characterization of thin films and their technological applications. Physical and chemical vapor deposition methods. Thin-film nucleation and growth. Thermal and ion processing. Microstructural development in epitaxial, polycrystalline, and amorphous films. Thin-film characterization techniques. Applications in information storage, integrated circuits, and optoelectronic devices. Laboratory demonstrations.
Thin-Film Materials Science: Read More [+]

Rules & Requirements

Prerequisites: Upper division or graduate standing in Engineering, Physics, Chemistry, or Chemical Engineering; and MAT SCI 45. PHYSICS 111A or PHYSICS 141A recommended

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Dubon

Thin-Film Materials Science: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
This course provides a culminating experience for students approaching completion of the materials science and engineering curriculum. Laboratory experiments are undertaken in a variety of areas from the investigations on semiconductor materials to corrosion science and elucidate the relationships among structure, processing, properties, and performance. The principles of materials selection in engineering design are reviewed.
Experimental Materials Science and Design: Read More [+]

Rules & Requirements

Prerequisites: Senior standing or consent of instructor

Hours & Format

Fall and/or spring: 15 weeks - 2 hours of lecture and 3 hours of laboratory per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Experimental Materials Science and Design: Read Less [-]

Terms offered: Fall 2019, Fall 2017, Fall 2015
In many, if not all, technologies, it is materials that play a crucial, enabling role. This course examines potentially sustainable technologies, and the materials properties that enable them. The science at the basis of selected energy technologies are examined and considered in case studies.
Materials in Energy Technologies: Read More [+]

Rules & Requirements

Prerequisites: Junior or above standing in Materials Science and Engineering or related field

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Formerly known as: Materials Science and Engineering 126

Materials in Energy Technologies: Read Less [-]

Terms offered: Spring 2020, Spring 2015, Spring 2013
This course introduces the fundamental principles needed to understand the behavior of materials at the nanometer length scale and the different classes of nanomaterials with applications ranging from information technology to biotechnology. Topics include introduction to different classes of nanomaterials, synthesis and characterization of nanomaterials, and the electronic, magnetic, optical, and mechanical properties of nanomaterials.
Nanomaterials for Scientists and Engineers: Read More [+]

Rules & Requirements

Prerequisites: PHYSICS 7C and MAT SCI 45. MAT SCI 102 recommended

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Minor

Nanomaterials for Scientists and Engineers: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018, Spring 2015
The application of basic chemical principles to problems in materials discovery, design, and characterization will be discussed. Topics covered will include inorganic solids, nanoscale materials, polymers, and biological materials, with specific focus on the ways in which atomic-level interactions dictate the bulk properties of matter.
Introduction to Materials Chemistry: Read More [+]

Rules & Requirements

Prerequisites: CHEM 104A. CHEM 104B recommended

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Also listed as: CHEM C150

Introduction to Materials Chemistry: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018
This course is designed for upper division undergraduate and graduate students to gain a fundamental understanding of the science of polymeric materials. Beginning with a treatment of ideal polymeric chain conformations, it develops the thermodynamics of polmyer blends and solutions, the modeling of polymer networks and gelations, the dynamics of polymer chains, and the morphologies of thin films and other dimensionally-restricted structures relevant to nanotechnology.
Polymeric Materials: Read More [+]

Rules & Requirements

Prerequisites: CHEM 1A or MAT SCI 45. MAT SCI 103 is recommended

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Xu

Polymeric Materials: Read Less [-]

Terms offered: Fall 2020
Nanomedicine is an emerging field involving the use of nanoscale materials for therapeutic and diagnostic purposes. Nanomedicine is a highly interdisciplinary field involving chemistry, materials science, biology and medicine, and has the potential to make major impacts on healthcare in the future. This upper division course is designed for students interested in learning about current developments and future trends in nanomedicine. The overall objective of the course is to introduce major aspects of nanomedicine including the selection, design and testing of suitable nanomaterials, and key determinants of therapeutic and diagnostic efficacy. Organic, inorganic and hybrid nanomaterials will be discussed in this course.
Nanomaterials in Medicine: Read More [+]

Objectives & Outcomes

Course Objectives: To identify an existing or unmet clinical need and identify a nanomedicine that can provide a solution
To learn about chemical approaches used in nanomaterial synthesis and surface modification.
To learn how to read and critique the academic literature.
To understand the interaction of nanomaterials with proteins, cells, and biological systems.

Rules & Requirements

Prerequisites: MAT SCI 45 or consent of instructor

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Messersmith

Also listed as: BIO ENG C157

Nanomaterials in Medicine: Read Less [-]

Terms offered: Fall 2016, Spring 2016, Fall 2015
Students who have completed a satisfactory number of advanced courses with a grade-point average of 3.3 or higher may pursue original research under the direction of one of the members of the staff. A maximum of 3 units of H194 may be used to fulfill technical elective requirements in the Materials Science and Engineering program or double majors (unlike 198 or 199, which do not satisfy technical elective requirements). Final report required.
Honors Undergraduate Research: Read More [+]

Rules & Requirements

Prerequisites: Upper division technical GPA of 3.3 or higher and consent of instructor and adviser

Repeat rules: Course may be repeated for credit without restriction.

Hours & Format

Fall and/or spring: 15 weeks - 1-4 hours of independent study per week

Summer: 8 weeks - 1.5-7.5 hours of independent study per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam not required.

Honors Undergraduate Research: Read Less [-]

Terms offered: Spring 2012, Spring 2011, Spring 2010
Group study of special topics in materials science and engineering. Selection of topics for further study of underlying concepts and relevent literature, in consultion with appropriate faculty members.
Special Topics for Advanced Undergraduates: Read More [+]

Rules & Requirements

Prerequisites: Upper division standing and good academic standing. (2.0 gpa and above)

Hours & Format

Fall and/or spring: 15 weeks - 1 hour of directed group study per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Special Topics for Advanced Undergraduates: Read Less [-]

Terms offered: Spring 2019, Fall 2018, Spring 2016
Group studies of selected topics.
Directed Group Studies for Advanced Undergraduates: Read More [+]

Rules & Requirements

Prerequisites: Upper division standing in Engineering

Hours & Format

Fall and/or spring: 15 weeks - 1-4 hours of directed group study per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.

Directed Group Studies for Advanced Undergraduates: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
Supervised independent study. Enrollment restrictions apply; see the Introduction to Courses and Curricula section of this catalog.
Supervised Independent Study: Read More [+]

Rules & Requirements

Prerequisites: Consent of instructor and major adviser

Credit Restrictions: Course may be repeated for a maximum of four units per semester.

Repeat rules: Course may be repeated for credit without restriction.

Hours & Format

Fall and/or spring: 15 weeks - 1-4 hours of independent study per week

Summer:
6 weeks - 1-5 hours of independent study per week
8 weeks - 1-4 hours of independent study per week

Additional Details

Subject/Course Level: Materials Science and Engineering/Undergraduate

Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.

Supervised Independent Study: Read Less [-]

Mechanical Engineering Courses

Terms offered: Fall 2020, Spring 2020, Fall 2019
The Berkeley Seminar Program has been designed to provide new students with the opportunity to explore an intellectual topic with a faculty member in a small-seminar setting. Berkeley Seminars are offered in all campus departments, and topics vary from department to department and semester to semester.
Freshman Seminars: Read More [+]

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring: 15 weeks - 1 hour of seminar per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Offered for pass/not pass grade only. Final Exam To be decided by the instructor when the class is offered.

Freshman Seminars: Read Less [-]

Terms offered: Fall 2020, Summer 2020 10 Week Session, Spring 2020
This course introduces the scientific principles that deal with energy conversion among different forms, such as heat, work, internal, electrical, and chemical energy. The physical science of heat and temperature, and their relations to energy and work, are analyzed on the basis of the four fundamental thermodynamic laws (zeroth, first, second, and third). These principles are applied to various practical systems, including heat engines, refrigeration cycles, air conditioning, and chemical reacting systems.
Thermodynamics: Read More [+]

Objectives & Outcomes

Course Objectives: 2) to develop analytic ability in real-world engineering applications using thermodynamics principles.
The objectives of this course are:
1) to provide the fundamental background of thermodynamics principles, and

Student Learning Outcomes: (a) an ability to apply knowledge of mathematics, science, and engineering
(e) an ability to identify, formulate, and solve engineering problems
(f) an understanding of professional and ethical responsibility
(h) the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context
(i) a recognition of the need for, and an ability to engage in life-long learning
(j) a knowledge of contemporary issues
(k) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Rules & Requirements

Prerequisites: CHEM 1A, ENGIN 7, MATH 1B, and PHYSICS 7B

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Summer: 10 weeks - 4.5 hours of lecture and 1.5 hours of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Thermodynamics: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
A review of equilibrium for particles and rigid bodies. Application to truss structures. The concepts of deformation, strain, and stress. Equilibrium equations for a continuum. Elements of the theory of linear elasticity. The states of plane stress and plane strain. Solution of elementary elasticity problems (beam bending, torsion of circular bars). Euler buckling in elastic beams.
Introduction to Solid Mechanics: Read More [+]

Rules & Requirements

Prerequisites: Mathematics 53 and 54 (may be taken concurrently); Physics 7A

Credit Restrictions: Students will receive no credit for Mechanical Engineering C85/Civil and Environmental Engineering C30 after completing Mechanical Engineering W85. A deficient grade in Mechanical Engineering W85 may be removed by taking Mechanical Engineering C85/Civil and Environmental Engineering C30.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Summer:
6 weeks - 7.5 hours of lecture and 2.5 hours of discussion per week
10 weeks - 4.5 hours of lecture and 1.5 hours of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Armero, Papadopoulos, Zohdi, Johnson

Also listed as: CIV ENG C30

Introduction to Solid Mechanics: Read Less [-]

Terms offered: Summer 2020 8 Week Session, Summer 2019 8 Week Session, Summer 2018 8 Week Session
A review of equilibrium for particles and rigid bodies. Application to truss structures. The concepts of deformation, strain, and stress. Equilibrium equations for a continuum. Elements of the theory of linear elasticity. The states of plane stress and plane strain. Solution of elementary elasticity problems (beam bending, torsion of circular bars). Euler buckling in elastic beams.
Introduction to Solid Mechanics: Read More [+]

Objectives & Outcomes

Course Objectives: To learn statics and mechanics of materials

Student Learning Outcomes: -
Correctly draw free-body
-
Apply the equations of equilibrium to two and three-dimensional solids
-
Understand the concepts of stress and strain
-
Ability to calculate deflections in engineered systems
-
Solve simple boundary value problems in linear elastostatics (tension, torsion, beam bending)

Rules & Requirements

Prerequisites: MATH 53 and MATH 54 (may be taken concurrently); PHYSICS 7A

Credit Restrictions: Students will receive no credit for MEC ENG W85 after completing MEC ENG C85. A deficient grade in MEC ENG W85 may be removed by taking MEC ENG C85.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of web-based lecture and 1 hour of web-based discussion per week

Summer:
6 weeks - 7.5 hours of web-based lecture and 2.5 hours of web-based discussion per week
8 weeks - 6 hours of web-based lecture and 2 hours of web-based discussion per week
10 weeks - 4.5 hours of web-based lecture and 1.5 hours of web-based discussion per week

Online: This is an online course.

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Govindjee

Also listed as: CIV ENG W30

Introduction to Solid Mechanics: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
Organized group study on various topics under the sponsorship and direction of a member of the Mechanical Engineering faculty.
Supervised Independent Group Studies: Read More [+]

Rules & Requirements

Prerequisites: Consent of instructor

Repeat rules: Course may be repeated for credit without restriction.

Hours & Format

Fall and/or spring: 15 weeks - 1-4 hours of directed group study per week

Summer: 10 weeks - 1.5-6 hours of directed group study per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.

Supervised Independent Group Studies: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
Electronics and Electrical Engineering has become pervasive in our lives as a powerful technology with applications in a wide range of fields including healthcare, environmental monitoring, robotics, or entertainment. This course offers a broad survey of Electrical Engineering ideas to non-majors. In the laboratory students will learn in-depth how to design and build systems that exchange information with or are controlled from the cloud. Examples include solar harvesters, robots, and smart home devices. In the course project, the students will integrate what they have learned and build an Internet-of-Things application of their choice. The course has a mandatory lab fee.
Electronics for the Internet of Things: Read More [+]

Objectives & Outcomes

Course Objectives: Electronics has become a powerful and ubiquitous technology supporting solutions to a wide range of applications in fields ranging from science, engineering, healthcare, environmental monitoring, transportation, to entertainment. This course teaches students majoring in these and related subjects how to use electronic devices to solve problems in their areas of expertise. Through the lecture and laboratory, students gain insight into the possibilities and limitations of the technology and how to use electronics to help solve problems.
Students learn to use electronics to interact with the environment through sound, light, temperature, motion using sensors and actuators, and how to use electronic computation to orchestrate the interactions and exchange information wirelessly over the internet.
The course has two objectives: (a) to teach students how to build electronic circuits that interact with the environment through sensors and actuators and how to communicate wirelessly with the internet to cooperate with other devices and with humans, and (b) to offer a broad survey of modern Electrical Engineering including analog electronics: analysis of RLC circuits, filtering, diodes and rectifiers, op-amps, A2D and D2A converters; digital electronics: combinatorial and sequential logic, flip-flops, counters, memory; applications: communication systems, signal processing, computer architecture; basics of manufacturing of integrated circuits.

Student Learning Outcomes: an ability to communicate effectively
an ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability
an ability to identify, formulate, and solve engineering problems
an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Rules & Requirements

Prerequisites: ENGIN 7, COMPSCI 10, COMPSCI 61A, COMPSCI C8, or equivalent background in computer programing; MATH 1A or equivalent background in calculus; PHYSICS 7A or equivalent background in physics

Credit Restrictions: Student will not receive credit for this course if they have taken EE49

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture, 2 hours of discussion, and 3 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Instructor: Poolla

Electronics for the Internet of Things: Read Less [-]

Terms offered: Spring 2019, Spring 2018, Spring 2017
Fundamentals of lean manufacturing systems including manufacturing fundamentals, unit operations and manufacturing line considerations for work in process (WIP), manufacturing lead time (MLT), economics, quality monitoring; high mix/low volume (HMLV) systems fundamentals including just in time (JIT), kanban, buffers and line balancing; class project/case studies for design and analysis of competitive manufacturing systems.
Introduction to Lean Manufacturing Systems: Read More [+]

Objectives & Outcomes

Course Objectives: This course will enable students to analyze manufacturing lines in order to understand the production process and improve production efficiency. The course provides practical knowledge and skills that can be applied in industry, covering the complete manufacturing system from production planning to quality control. Students are given a chance to practice and implement what they learn during lectures by conducting projects with local or global manufacturing companies.

Student Learning Outcomes: Students will understand the whole scope of manufacturing systems from production planning to quality control, which can be helpful to set up manufacturing lines for various products. Students will be capable of identifying sources of manufacturing problems by analyzing the production line and produce multi-level solutions to optimize manufacturing efficiency.

Rules & Requirements

Prerequisites: Completion of all lower division requirements for an engineering major, or consent of instructor

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Summer: 6 weeks - 7.5 hours of lecture and 3 hours of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Dornfeld, McMains

Introduction to Lean Manufacturing Systems: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
Introduction to design and realization of mechatronics systems. Micro computer architectures. Basic computer IO devices. Embedded microprocessor systems and control, IO programming such as analogue to digital converters, PWM, serial and parallel outputs. Electrical components such as power supplies, operational amplifiers, transformers and filters. Shielding and grounding. Design of electric, hydraulic and pneumatic actuators. Design of sensors. Design of power transmission systems. Kinematics and dynamics of robotics devices. Basic feedback design to create robustness and performance.
Mechatronics Design: Read More [+]

Objectives & Outcomes

Course Objectives: Introduce students to design and design techniques of mechatronics systems; provide guidelines to and experience with design of variety of sensors and actuators; design experience in programming microcomputers and various IO devices; exposure to and design experience in synthesis of mechanical power transfer components; understanding the role of dynamics and kinematics of robotic devices in design of mechatronics systems; exposure to and design experience in synthesis of feedback systems; provide experience in working in a team to design a prototype mechatronics device.

Student Learning Outcomes: By the end of this course, students should: Know how to set up micro computers and interface them with various devices; know how to understand the microcomputers architectures, IO devices and be able to program them effectively; understand the design of actuators and sensors; know how to do shielding and grounding for various mechatronics projects, know how to create feedback systems, know the role of dynamics and kinematics of robotic devices in design and control of mechatronics systems; know how to design mechanical components such as transmissions, bearings, shafts, and fasteners.

Rules & Requirements

Prerequisites: ENGIN 25, ENGIN 26, ENGIN 27; and EECS 16A or MEC ENG 100. Please note that junior transfer students are exempt from ENGIN 26

Hours & Format

Fall and/or spring: 15 weeks - 2 hours of lecture and 3 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Mechatronics Design: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
This course introduces students to modern experimental techniques for mechanical engineering, and improves students’ teamwork and communication skills. Students will work in a laboratory setting on systems ranging in complexity from desktop experiments with only a few instruments up to systems such as an internal combustion engine with a wide variety of sensors. State-of-the-art software for data acquisition and analysis will be introduced and used throughout the course. The role of error and uncertainty, and uncertainty propagation, in measurements and analysis will be examined. Design of experiments will be addressed through examples and homework. The role and limitations of spectral analysis of digital data will be discussed.
Experimentation and Measurements: Read More [+]

Objectives & Outcomes

Course Objectives: Introduce students to modern experimental techniques for mechanical engineering; provide exposure to and experience with a variety of sensors, including those to measure temperature, displacement, velocity, acceleration and strain; examine the role of error and uncertainty in measurements and analysis; exposure to and experience in using commercial software for data acquisition and analysis; discuss the role and limitations of spectral analysis of digital data; provide experience in working in a team in all aspects of the laboratory exercises, including set-up, data collection, analysis, technical report writing and oral presentation.

Student Learning Outcomes: (a) an ability to apply knowledge of mathematics, science, and engineering
(b) an ability to design and conduct experiments, as well as to analyze and interpret data
(c) an ability to function on multi-disciplinary teams
(d) an ability to identify, formulate, and solve engineering problems
(e) an understanding of professional and ethical responsibility
(f) an ability to communicate effectively
(g) the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context
(h) a recognition of the need for, and an ability to engage in life-long learning
(j) a knowledge of contemporary issues
(i) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Rules & Requirements

Prerequisites: MEC ENG 40; MEC ENG C85 / CIV ENG C30; MEC ENG 100; MEC ENG 106 (can be taken concurrently), and MEC ENG 109 (can be taken concurrently)

Credit Restrictions: Students will not receive credit for this course if they have taken both ME 102A and ME 107.

Hours & Format

Fall and/or spring: 15 weeks - 2 hours of lecture, 1 hour of discussion, and 3 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Instructors: Johnson, Makiharju, Chen

Experimentation and Measurements: Read Less [-]

Terms offered: Fall 2020, Summer 2020 10 Week Session, Spring 2020
This course is an introduction to the dynamics of particles and rigid bodies. The material, based on a Newtonian formulation of the governing equations, is illustrated with numerous examples ranging from one-dimensional motion of a single particle to planar motions of rigid bodies and systems of rigid bodies.
Engineering Mechanics II: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG C85 and ENGIN 7

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Summer: 10 weeks - 4.5 hours of lecture and 1.5 hours of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Ma

Engineering Mechanics II: Read Less [-]

Terms offered: Fall 2020, Summer 2020 10 Week Session, Spring 2020
This course introduces the fundamentals and techniques of fluid mechanics with the aim of describing and controlling engineering flows.
Fluid Mechanics: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG C85 / CIV ENG C30 and MEC ENG 104 (104 may be taken concurrently)

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Summer: 10 weeks - 4.5 hours of lecture and 1.5 hours of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Fluid Mechanics: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
This course covers elastic and plastic deformation under static and dynamic loads. Failure by yielding, fracture, fatigue, wear, and environmental factors are also examined. Topics include engineering materials, heat treatment, structure-property relationships, elastic deformation and multiaxial loading, plastic deformation and yield criteria, dislocation plasticity and strengthening mechanisms, creep, stress concentration effects, fracture, fatigue, and contact deformation.
Mechanical Behavior of Engineering Materials: Read More [+]

Objectives & Outcomes

Course Objectives: The central theme of this course is the mechanical behavior of engineering materials, such as metals, ceramics, polymers, and composites, subjected to different types of loading. The main objectives are to provide students with basic understanding of phase transformation by heat treating and stress-induced hardening, linear and nonlinear elastic behavior, deformation under multiaxial loading, plastic deformation and yield criteria, dislocation plasticity and strengthening mechanisms, creep, stress concentration effects, brittle versus ductile fracture, fracture mechanisms at different scales, fatigue, contact deformation, and wear.

Rules & Requirements

Prerequisites: MEC ENG C85 / CIV ENG C30

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture, 1 hour of discussion, and 2 hours of laboratory per week

Summer: 10 weeks - 4.5 hours of lecture, 1.5 hours of discussion, and 3 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Mechanical Behavior of Engineering Materials: Read Less [-]

Terms offered: Fall 2020, Summer 2020 10 Week Session, Spring 2020
This course covers transport processes of mass, momentum, and energy from a macroscopic view with emphasis both on understanding why matter behaves as it does and on developing practical problem solving skills. The course is divided into four parts: introduction, conduction, convection, and radiation.
Heat Transfer: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 40 and MEC ENG 106

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Summer:
8 weeks - 5.5 hours of lecture and 1.5 hours of discussion per week
10 weeks - 4.5 hours of lecture and 1.5 hours of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Heat Transfer: Read Less [-]

Terms offered: Summer 2020 10 Week Session, Spring 2020, Summer 2019 10 Week Session
The course provides project-based learning experience in innovative new product development, with a focus on mechanical engineering systems. Design concepts and techniques are introduced, and the student's design ability is developed in a design or feasibility study chosen to emphasize ingenuity and provide wide coverage of engineering topics. Relevant software will be integrated into studio sessions, including solid modeling and environmental life cycle analysis. Design optimization and social, economic, and political implications are included.
Introduction to Product Development: Read More [+]

Rules & Requirements

Prerequisites: Junior or higher standing

Hours & Format

Fall and/or spring: 15 weeks - 3-3 hours of lecture and 0-1 hours of voluntary per week

Summer: 10 weeks - 4.5-4.5 hours of lecture and 0-1 hours of voluntary per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam not required.

Introduction to Product Development: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2016
This course applies methods of statistical continuum mechanics to subcellar biomechanical phenomena ranging from nanoscale (molecular) to microscale (whole cell and cell population) biological processes at the interface of mechanics, biology, and chemistry.
Molecular Biomechanics and Mechanobiology of the Cell: Read More [+]

Objectives & Outcomes

Course Objectives: This course, which is open to senior undergraduate students or graduate students in diverse disciplines ranging from engineering to biology to chemistry and physics, is aimed at exposing students to subcellular biomechanical phenomena spanning scales from molecules to the whole cell.

Student Learning Outcomes: The students will develop tools and skills to (1) understand and analyze subcelluar biomechanics and transport phenomena, and (2) ultimately apply these skills to novel biological and biomedical applications

Rules & Requirements

Prerequisites: MATH 54 and PHYSICS 7A; BIO ENG 102, MEC ENG C85 / CIV ENG C30 or instructor’s consent

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Instructor: Mofrad

Also listed as: BIO ENG C112

Molecular Biomechanics and Mechanobiology of the Cell: Read Less [-]

Terms offered: Fall 2020, Spring 2019, Spring 2018
This course covers the structure and mechanical functions of load bearing tissues and their replacements. Natural and synthetic load-bearing biomaterials for clinical applications are reviewed. Biocompatibility of biomaterials and host response to structural implants are examined. Quantitative treatment of biomechanical issues and constitutive relationships of tissues are covered in order to design biomaterial replacements for structural function. Material selection for load bearing applications including reconstructive surgery, orthopedics, dentistry, and cardiology are addressed. Mechanical design for longevity including topics of fatigue, wear, and fracture are reviewed. Case studies that examine failures of devices are presented.
Structural Aspects of Biomaterials: Read More [+]

Rules & Requirements

Prerequisites: BIOLOGY 1A and MAT SCI 45; CIV ENG 130, CIV ENG 130N, or BIO ENG 102

Credit Restrictions: Students will receive no credit for Mechanical Engineering C117 after completing Mechanical Engineering C215/Bioengineering C222.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Instructor: Pruitt

Also listed as: BIO ENG C117

Structural Aspects of Biomaterials: Read Less [-]

Terms offered: Spring 2020, Spring 2017, Spring 2015
This course introduces engineering students (juniors and seniors) to the field of nanotechnology and nanoscience. The course has two components: (1) Formal lectures. Students receive a set of formal lectures introducing them to the field of nanotechnology and nanoscience. The material covered includes nanofabrication technology (how one achieves the nanometer length scale, from "bottom up" to "top down" technologies), the interdisciplinary nature of nanotechnology and nanoscience (including areas of chemistry, material science, physics, and molecular biology), examples of nanoscience phenomena (the crossover from bulk to quantum mechanical properties), and applications (from integrated circuits, quantum computing, MEMS, and bioengineering). (2) Projects. Students are asked to read and present a variety of current journal papers to the class and lead a discussion on the various works.
Introduction to Nanotechnology and Nanoscience: Read More [+]

Rules & Requirements

Prerequisites: Chemistry 1A and Physics 7B. Physics 7C and Engineering 45 (or the equivalent) recommended

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Lin, Sohn

Introduction to Nanotechnology and Nanoscience: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2017
Fundamentals of microelectromechanical systems including design, fabrication of microstructures; surface-micromachining, bulk-micromachining, LIGA, and other micro machining processes; fabrication principles of integrated circuit device and their applications for making MEMS devices; high-aspect-ratio microstructures; scaling issues in the micro scale (heat transfer, fluid mechanics and solid mechanics); device design, analysis, and mask layout.
Introduction to MEMS (Microelectromechanical Systems): Read More [+]

Rules & Requirements

Prerequisites: PHYSICS 7B and MEC ENG 100

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Introduction to MEMS (Microelectromechanical Systems): Read Less [-]

Terms offered: Fall 2016, Spring 2015, Spring 2014
This course applies the methods of computational modeling and continuum mechanics to biomedical phenomena spanning various length scales ranging from molecular to cellular to tissue and organ levels. The course is intended for upper level undergraduate students who have been exposed to undergraduate continuum mechanics (statics and strength of materials.)
Computational Biomechanics Across Multiple Scales: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG C85 / CIV ENG C30

Hours & Format

Fall and/or spring: 15 weeks - 2 hours of lecture and 3 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam not required.

Instructor: Mofrad

Computational Biomechanics Across Multiple Scales: Read Less [-]

Terms offered: Spring 2020, Spring 2018, Spring 2017
Fundamentals of manufacturing processes (metal forming, forging, metal cutting, welding, joining, and casting); selection of metals, plastics, and other materials relative to the design and choice of manufacturing processes; geometric dimensioning and tolerancing of all processes.
Processing of Materials in Manufacturing: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG C85 / CIV ENG C30 and MEC ENG 108

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Processing of Materials in Manufacturing: Read Less [-]

Terms offered: Spring 2018
iACME provide opportunities for Mechanical Engineering undergraduates to tackle real-world engineering problems. Student teams, consisting of no more than four students, will apply to work on specific industry- initiated projects. Teams will be selected based on prior experience in research/internships, scholastic achievements in ME courses, and most importantly, proposed initial approaches toward tackling the specific project. ME faculty, alumni of the Mechanical Engineering Department, and industry participants will mentor selected teams. Projects fall within a wide range of mechanical engineering disciplines, e.g. biomedical, automotive/transportation, energy, design, etc.
Industry-Associated Capstones in Mechanical Engineering (iACME): Read More [+]

Objectives & Outcomes

Course Objectives: The purpose of this course is to:
•
learn the fundamental concepts of approaching practical engineering problems;
•
enhance skills in communication with clients and other engineers;
•
enhance skills in design, prototyping, testing, and analysis.

Student Learning Outcomes: (a) an ability to apply knowledge of mathematics, science, and engineering
(b) an ability to design and conduct experiments, as well as to analyze and interpret data
(c) an ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability
(d) an ability to function on multi-disciplinary teams
(e) an ability to identify, formulate, and solve engineering problems
(f) an understanding of professional and ethical responsibility
(g) an ability to communicate effectively
(h) the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context
(i) a recognition of the need for, and an ability to engage in life-long learning
(j) a knowledge of contemporary issues
(k) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Rules & Requirements

Prerequisites: Senior standing and a minimum GPA of 3.0

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternate method of final assessment during regularly scheduled final exam group (e.g., presentation, final project, etc.).

Instructors: O'Connell , Sohn

Industry-Associated Capstones in Mechanical Engineering (iACME): Read Less [-]

Terms offered: Spring 2011, Spring 2010, Fall 2007
Imagine a material that offers mechanical properties that are competitive with aluminum and steel but are at fractions of their weight – these materials are termed as composites. Composite materials are used for many applications such as aircraft structures, biomedical devices, racing car bodies, and many others for their capability to be stronger, lighter, and cheaper when compared to traditional materials. In this class, students will delve into the theory to design composite structures, processing techniques to manufacture them, and structural testing methods for validation. Starting from traditional fiber-reinforced composite materials, this course will also bring in new concepts such as nanocomposites and bioinspired composites.
Introduction to Composite Materials: Read More [+]

Objectives & Outcomes

Course Objectives: The course objectives are to train students to be able to design composite structures, select composite materials, conduct stress analyses of selected practical applications using laminated plate theories and appropriate strength criteria, and be familiar with the properties and response of composite structures subjected to mechanical loading under static and cyclic conditions.

Student Learning Outcomes: A knowledge of contemporary issues.
An ability to design and conduct experiments, as well as to analyze and interpret data.
An understanding of professional and ethical responsibility.
The broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context.
A recognition of the need for, and an ability to engage in life-long learning.
An ability to apply knowledge of mathematics, science, and engineering.
An ability to communicate effectively.
An ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability.

An ability to function on multi-disciplinary teams.
An ability to identify, formulate, and solve engineering problems.
An ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.
Students completing this course will have the facility for designing robust composite structures subjected to various types of loads. Students will also be able to assess the effects of long-term loading, including damage generation, delamination fracture and fatigue failure. Additionally, students will be exposed to how composites are used in various applications in aerospace, biomedical, sports, among other fields.

Rules & Requirements

Prerequisites: MEC ENG C85 / CIV ENG C30

Credit Restrictions: Students will receive no credit for MEC ENG 127 after completing MEC ENG 127. A deficient grade in MEC ENG 127 may be removed by taking MEC ENG 127.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Instructor: Gu

Introduction to Composite Materials: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
Synthesis, analysis, and design of planar machines. Kinematic structure, graphical, analytical, and numerical analysis and synthesis. Linkages, cams, reciprocating engines, gear trains, and flywheels.
Design of Planar Machinery: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 104

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Youssefi

Design of Planar Machinery: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018
Physical understanding of automotive vehicle dynamics including simple lateral, longitudinal and ride quality models. An overview of active safety systems will be introduced including the basic concepts and terminology, the state-of-the-art development, and basic principles of systems such as ABS, traction control, dynamic stability control, and roll stability control. Passive, semi-active and active suspension systems will be analyzed. Concepts of autonomous vehicle technology including drive-by-wire and steer-by-wire systems, adaptive cruise control and lane keeping systems. Design of software control systems for an actual 1/10 scale race vehicle.
Vehicle Dynamics and Control: Read More [+]

Objectives & Outcomes

Course Objectives: At the end of the course the students should be able to:
a.
Formulate simple but accurate dynamic models for automotive longitudinal, lateral and ride quality analysis.
b.
Assess the stability of dynamic systems using differential equation theory, apply frequency-response methods to assess system response to external disturbances, sensor noise and parameter variations.
c.
Have a basic understanding of modern automotive safety systems including ABS, traction control, dynamic stability control and roll control.
d.
Follow the literature on these subjects and perform independent design, research and development work in this field.
e.
Expected to design feedback control systems for an actual 1/010 scaled vehicle platform which will be distributed to every group of two students in the class

Rules & Requirements

Prerequisites: MATH 1B, MATH 53, MATH 54, PHYSICS 7A, PHYSICS 7B, ENGIN 7 (or alternate programming course), and MEC ENG 132

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Borrelli

Vehicle Dynamics and Control: Read Less [-]

Terms offered: Fall 2020, Summer 2020 10 Week Session, Spring 2020
Physical understanding of dynamics and feedback. Linear feedback control of dynamic systems. Mathematical tools for analysis and design. Stability. Modeling systems with differential equations. Linearization. Solution to linear, time-invariant differential equations.
Dynamic Systems and Feedback: Read More [+]

Rules & Requirements

Prerequisites: MATH 53, MATH 54, PHYSICS 7A, and PHYSICS 7B

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of laboratory per week

Summer: 10 weeks - 4.5 hours of lecture and 1.5 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Dynamic Systems and Feedback: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Fall 2016
An introduction to the theory of mechanical vibrations including topics of harmonic motion, resonance, transient and random excitation, applications of Fourier analysis and convolution methods. Multidegree of freedom discrete systems including principal mode, principal coordinates and Rayleigh's principle.
Mechanical Vibrations: Read More [+]

Objectives & Outcomes

Course Objectives: Introduce basic aspects of vibrational analysis, considering both single and multi-degree-of-freedom systems. Discuss the use of exact and approximate methods in the analysis of complex systems. Familiarize students with the use of MATLAB as directed toward vibration problems.

Student Learning Outcomes: (a) an ability to apply knowledge of mathematics, science, and engineering
(b) an ability to design and conduct experiments, as well as to analyze and interpret data
(c) an ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability
(e) an ability to identify, formulate, and solve engineering problems
(f) an understanding of professional and ethical responsibility
(g) an ability to communicate effectively
(i) a recognition of the need for, and an ability to engage in life-long learning
(j) a knowledge of contemporary issues
(k) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Upon completion of the course students shall be able to: Derive the equations of motion for vibratory systems. Linearize nonlinear systems so as to allow a linear vibrational analysis. Compute the natural frequency (or frequencies) of vibratory systems and determine the system's modal response. Determine the overall response based upon the initial conditions and/or steady forcing input. Design a passive vibration absorber to ameliorate vibrations in a forced system.

Rules & Requirements

Prerequisites: MEC ENG 104

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Summer: 10 weeks - 5 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Mechanical Vibrations: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
Analysis and synthesis of linear feedback control systems in transform and time domains. Control system design by root locus, frequency response, and state space methods. Applications to electro-mechanical and mechatronics systems.
Feedback Control Systems: Read More [+]

Rules & Requirements

Prerequisites: EECS 16A or MEC ENG 100; MEC ENG 132 or EL ENG 120

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture, 1 hour of discussion, and 3 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Also listed as: EL ENG C128

Feedback Control Systems: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018
This course provides preparation for the conceptual design and prototyping of mechanical systems that use microprocessors to control machine activities, acquire and analyze data, and interact with operators. The architecture of microprocessors is related to problems in mechanical systems through study of systems, including electro-mechanical components, thermal components and a variety of instruments. Laboratory exercises lead through studies of different levels of software.
Design of Microprocessor-Based Mechanical Systems: Read More [+]

Rules & Requirements

Prerequisites: ENGIN 7

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 3 hours of laboratory per week

Summer: 10 weeks - 4.5 hours of lecture and 4.5 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam not required.

Instructor: Kazerooni

Design of Microprocessor-Based Mechanical Systems: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
This course introduces students to the control of unmanned aerial vehicles (UAVs). The course will cover modeling and dynamics of aerial vehicles, and common control strategies. Laboratory exercises allow students to apply knowledge on a real system, by programming a microcontroller to control a UAV.
Introduction to Control of Unmanned Aerial Vehicles: Read More [+]

Objectives & Outcomes

Course Objectives: Introduce the students to analysis, modeling, and control of unmanned aerial vehicles. Lectures will cover:
•
Principle forces acting on a UAV, including aerodynamics of propellers
•
The kinematics and dynamics of rotations, and 3D modeling of vehicle dynamics
•
Typical sensors, and their modeling
•
Typical control strategies, and their pitfalls
•
Programming a microcontroller
During the laboratory sessions, students will apply these skills to create a model-based controller for a UAV.

Student Learning Outcomes: (a) an ability to apply knowledge of mathematics, science, and engineering
(b) an ability to design and conduct experiments, as well as to analyze and interpret data
(g) an ability to communicate effectively
(k) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice

Rules & Requirements

Prerequisites: MEC ENG 104 is recommended. Corequisite: MEC ENG 132

Credit Restrictions: Student will not receive credit for this course if they have taken Mechanical Engineering 236U.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 3 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Mueller

Introduction to Control of Unmanned Aerial Vehicles: Read Less [-]

Terms offered: Spring 2018, Spring 2015, Spring 2013
This hands-on laboratory course focuses on the mechanical engineering principles that underlie the design, fabricaton, and operation of micro/nanoscale mechanical systems, including devices made by nanowire/nanotube syntheses; photolithography/soft lithography; and molding processes. Each laboratory will have different focuses for basic understanding of MEMS/NEMS systems from prototype constructions to experimental testings using mechanical, electrical, or optical techniques.
Introduction to Micro/Nano Mechanical Systems Laboratory: Read More [+]

Rules & Requirements

Prerequisites: PHYSICS 7B and MEC ENG 106; EECS 16A or MEC ENG 100. MEC ENG 118 or MEC ENG 119 are highly recommended but not mandatory

Credit Restrictions: Students will receive no credit for Mechanical Engineering 238 after taking Mechanical Engineering 138.

Hours & Format

Fall and/or spring: 15 weeks - 2 hours of lecture and 3 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Introduction to Micro/Nano Mechanical Systems Laboratory: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
Fundamentals of combustion, flame structure, flame speed, flammability, ignition, stirred reaction, kinetics and nonequilibrium processes, pollutant formation. Application to engines, energy production and fire safety.
Combustion Processes: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 40, MEC ENG 106, and MEC ENG 109 (106 and 109 may be taken concurrently)

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Fernandez-Pello, Chen

Combustion Processes: Read Less [-]

Terms offered: Fall 2018, Spring 2018, Fall 2016
This course covers the fundamental principles of energy conversion processes, followed by development of theoretical and computational tools that can be used to analyze energy conversion processes. The course also introduces the use of modern computational methods to model energy conversion performance characteristics of devices and systems. Performance features, sources of inefficiencies, and optimal design strategies are explored for a variety of applications, which may include conventional combustion based and Rankine power systems, energy systems for space applications, solar, wind, wave, thermoelectric, and geothermal energy systems.
Energy Conversion Principles: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 40, MEC ENG 106, and MEC ENG 109 (106 and 109 may be taken concurrently)

Hours & Format

Fall and/or spring: 15 weeks - 3-3 hours of lecture and 0-1 hours of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Carey

Energy Conversion Principles: Read Less [-]

Terms offered: Summer 2015 10 Week Session, Summer 2014 10 Week Session, Spring 2014
This course addresses all aspects of design, analysis, construction and economics of solar-powered vehicles. It begins with an examination of the fundamentals of photovoltaic solar power generation, and the capabilities and limitations that exist when using this form of renewable energy. The efficiency of energy conversion and storage will be evaluated across an entire system, from the solar energy that is available to the mechanical power that is ultimately produced. The structural and dynamic stability, as well as the aerodynamics, of vehicles will be studied. Safety and economic concerns will also be considered. Students will work in teams to design, build and test a functioning single-person vehicle capable of street use.
Solar-Powered Vehicles: Analysis, Design and Fabrication: Read More [+]

Objectives & Outcomes

Course Objectives: This course provides a structured environment within which students can participate in a substantial engineering project from start to finish. It provides the opportunity for students to engage deeply in the analysis, design and construction of a functioning vehicle powered by a renewable source. Through participation in this course, students should strengthen their understanding of how their engineering education can be used to address the multidisciplinary problems with creativity, imagination, confidence and responsibility. Students will recognize the importance of effective communication in effectively addressing such problems.

Student Learning Outcomes: This course will strengthen students’ abilities: to apply knowledge of mathematics, science, and engineering to real projects; to design a component or process that is part of a larger system; to function on multi-disciplinary teams; to identify, formulate, and solve engineering problems; to communicate effectively; to understand the impact of engineering solutions in a context beyond the classroom; to appreciate the importance of engaging in life-long learning and understanding contemporary issues; and to recognize and use the techniques, skills, and modern engineering tools necessary for successful project completion.

Rules & Requirements

Prerequisites: MATH 54, PHYSICS 7A, and upper division status in engineering

Hours & Format

Fall and/or spring: 15 weeks - 2 hours of lecture and 3 hours of laboratory per week

Summer: 10 weeks - 3 hours of lecture and 4.5 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Solar-Powered Vehicles: Analysis, Design and Fabrication: Read Less [-]

Terms offered: Spring 2017, Spring 2014, Spring 2008
Basic principles of heat transfer and their application. Subject areas include steady-state and transient system analyses for conduction, free and forced convection, boiling, condensation and thermal radiation.
Advanced Heat Transfer: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 40, MEC ENG 106, and MEC ENG 109 (106 and 109 may be taken concurrently)

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Advanced Heat Transfer: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
Fundamentals of conductive heat transfer. Analytical and numerical methods for heat conduction in rigid media. Fundamentals of radiative transfer. Radiative properties of solids, liquids and gas media. Radiative transport modeling in enclosures and participating media.
Conductive and Radiative Transport: Read More [+]

Objectives & Outcomes

Course Objectives: The course will provide students with knowledge of the physics of conductive transport in solids, the analysis of steady and transient heat conduction by both analytical and numerical methods and the treatment of phase change problems. Furthermore, the course will provide students with knowledge of radiative properties, the mechanisms of radiative transfer and will present theory and methods of solution of radiative transfer problems in participating and nonparticipating media.

Student Learning Outcomes: Students will gain knowledge of the mechanisms of conductive transfer and will develop the ability to quantify steady and transient temperature in important engineering problems often encountered (e.g. manufacturing, materials processing, bio-thermal treatment and electronics cooling) by applying analytical methods and by constructing numerical algorithms. Students will also gain knowledge of the fundamental radiative properties and the mechanisms of radiative transport in enclosures, absorbing, emitting and scattering media as well as the interaction of thermal radiation with other modes of heat transfer.

Rules & Requirements

Prerequisites: Undergraduate courses in engineering thermodynamics, fluid dynamics and heat transfer (MEC ENG 40, MEC ENG 106, and MEC ENG 109). Each student must have access to a PC, Macintosh or workstation machine with scientific programming capabilities for use in homework and projects

Credit Restrictions: Students who have taken ME 151 or ME 250A will not receive credit.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Instructor: Grigoropoulos

Conductive and Radiative Transport: Read Less [-]

Terms offered: Spring 2020, Spring 2019
The transport of heat and mass in fluids in motion; free and forced convection in laminar and turbulent flow over surfaces and within ducts. Fundamentals of computational methods used for solving the governing transport equations will also be covered.
Convective Transport and Computational Methods: Read More [+]

Objectives & Outcomes

Course Objectives: This course will provide students with knowledge of the physics of convective transport and an introduction to computational tools that can model convective processes in important applications such as electronics cooling, aerospace thermal management. The course also teaches students to construct computational models of natural and forced convection processes in boundary layers nears surfaces, in enclosures and in ducts or pipes that can be used to design heat exchangers and thermal management equipment for applications.

Student Learning Outcomes: (a) an ability to apply knowledge of mathematics, science, and engineering
(c) an ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability
(d) an ability to function on multi-disciplinary teams
(e) an ability to identify, formulate, and solve engineering problems
(g) an ability to communicate effectively
(j) a knowledge of contemporary issues
(k) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.
Students will gain a knowledge of the mechanisms of convective heat and mass transfer for flow over surfaces and within ducts, and will develop the ability to construct computer programs that implement computation methods that predict the flow and temperature fields and heat transfer performance for convective flows of interest in engineering applications.

Rules & Requirements

Credit Restrictions: Students should not receive credit for this course if they have taken ME 252 or ME 250B.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Instructor: Carey

Convective Transport and Computational Methods: Read Less [-]

Terms offered: Not yet offered
Fundamentals of electromagnetic theory, principles of optics, waves, diffraction theory, interference, geometrical optics, scattering, theory of molecular spectra, optical and spectroscopic instrumentation. Lasers and laser materials processing, laser spectroscopy. Modern optics, plasmonics.
Applied Optics and Radiation: Read More [+]

Objectives & Outcomes

Course Objectives: The course will provide students with knowledge of the fundamental principles of optics to analyze optical phenomena and develop the background and skills to design optical instrumentation applied to engineering fields, including additive manufacturing, radiometry and spectroscopy.

Student Learning Outcomes: ABET Outcomes
(a) an ability to apply knowledge of mathematics, science, and engineering
(b) an ability to design and conduct experiments, as well as to analyze and interpret data
(c) an ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability
(e) an ability to identify, formulate, and solve engineering problems
(g) an ability to communicate effectively
(k) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice
Students will gain knowledge of the EM theory, optical properties of materials, principles of spectroscopy for gases, liquids and solids, principles and applications of lasers and optical diagnostics. Students will develop the ability to design optical instrumentation systems in the context of key industrial applications, including additive manufacturing, materials processing, bio-optics, semiconductor industry applications, reacting systems, forensics.

Rules & Requirements

Prerequisites: Undergraduate courses in physics (e.g. 7A,B,C). Each student must have access to a PC, Macintosh or workstation machine with scientific programming capabilities for use in homework and projects

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Instructor: Grigoropoulos

Applied Optics and Radiation: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Spring 2019
Development of classical thermodynamics from statistical treatment of microscale molecular behavior; Boltzmann distribution; partition functions; statistical-mechanical evaluation of thermodynamic properties; equilibrium; chemical equilibrium; phase transitions; molecular collisions; Maxwell-Boltzmann distribution; collision theory; elementary kinetic theory; molecular dynamics simulation of molecular collisions; kinetic Monte Carlo simulations of gas-phase and gas-surface reactions. Implications are explored for a variety of applications, which may include advanced combustion systems, renewable power systems, microscale transport in high heat flux electronics cooling, aerospace thermal management, and advanced materials processing.
Thermophysics for Applications: Read More [+]

Objectives & Outcomes

Course Objectives: To introduce students to the statistical foundation of thermodynamics and provide skills to perform advanced calculations for analysis of advanced energy conversion processes and devices.

Student Learning Outcomes: a knowledge of contemporary issues
an ability to apply knowledge of mathematics, science, and engineering
an ability to communicate effectively
an ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability
an ability to function on multi-disciplinary teams
an ability to identify, formulate, and solve engineering problems
an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Rules & Requirements

Prerequisites: MEC ENG 40

Credit Restrictions: Student will not receive credit for this course if they have taken ME 254.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Frenklach, Carey

Thermophysics for Applications: Read Less [-]

Terms offered: Spring 2020, Spring 2019
Lectures on new developments in ocean, offshore, and arctic engineering.
Ocean Engineering Seminar: Read More [+]

Objectives & Outcomes

Course Objectives: To provide exposure of the field of ocean engineering, arctic engineering and related subject areas to students with the intention to show the broad and interdisciplinary nature of this field, particularly recent or new developments.

Student Learning Outcomes: (f) an understanding of professional and ethical responsibility
(h) the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context
(i) a recognition of the need for, and an ability to engage in life-long learning
(j) a knowledge of contemporary issues
Students will learn of new developments in ocean, offshore, and arctic engineering, connecting much of what is learned in other courses to practical applications and active research topics.

Rules & Requirements

Repeat rules: Course may be repeated for credit with instructor consent.

Hours & Format

Fall and/or spring: 15 weeks - 2 hours of seminar per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Offered for pass/not pass grade only. Alternative to final exam.

Instructors: Makiharju, Alam

Ocean Engineering Seminar: Read Less [-]

Terms offered: Fall 2019, Fall 2018, Fall 2016
Introduction to the lift, drag, and moment of two-dimensional airfoils, three-dimensional wings, and the complete airplane. Calculations of the performance and stability of airplanes in subsonic flight. The course run on two loosely aligned parallel tracks: a traditional sequence of lectures covering the basic topics in aerodynamics and a set of projects on vortex dynamics and aerodynamics that are loosely aligned with lectures. The distinguishing factor will be the extend of the projects assigned to the graduate level participants, which will be substantially more involved than those expected from the senior level participants.
Engineering Aerodynamics: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 40, MEC ENG 106

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Savas

Engineering Aerodynamics: Read Less [-]

Terms offered: Fall 2012, Fall 2011, Fall 2009
Terminology and definition of hull forms, conditions of static equilibrium and stability of floating submerged bodies. Effects of damage on stability. Structural loads and response. Box girder theory. Isotropic and orthotropic plate bending and bucking.
Marine Statics and Structures: Read More [+]

Rules & Requirements

Prerequisites: Civil and Environmental Engineering 130 or 130N or consent of instructor

Credit Restrictions: Students will receive no credit for 164 after taking C164/Ocean Engineering C164; 2 units after taking 151.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Mansour

Formerly known as: C164

Marine Statics and Structures: Read Less [-]

Terms offered: Spring 2020, Spring 2018, Spring 2017
Ocean environment. Physical properties and characteristics of the oceans. Global conservation laws. Surface-waves generation. Gravity-wave mechanics, kinematics, and dynamics. Design consideration of ocean vehicles and systems. Model-testing techniques. Prediction of resistance and response in waves--physical modeling and computer models.
Ocean-Environment Mechanics: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 106 or CIV ENG 100

Credit Restrictions: Students will receive no credit for 165 after taking C165/Ocean Engineering C165.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Yeung

Formerly known as: C165

Ocean-Environment Mechanics: Read Less [-]

Terms offered: Spring 2018, Spring 2016, Spring 2015
Phenomena of physical, technological, and biological significance in flows of gases and liquids at the microscale. The course begins with familiar equations of Newtonian fluid mechanics, then proceeds to the study of essentially 1-D flows in confined geometries with the lubrication equations. Next is a study of the flow of thin films spreading under gravity or surface tension gradients. Lubrication theory of compressible gases leads to consideration of air bearings. Two- and 3-D flows are treated with Stokes' equations. Less familiar physical phenomena of significance and utility at the microscale are then considered: intermolecular forces in liquids, slip, diffusion and bubbles as active agents. A review of relevant aspects of electricity and magnetism precedes a study of electrowetting and electrokinetically driven liquid flows.
Microscale Fluid Mechanics: Read More [+]

Rules & Requirements

Prerequisites: 40, 106, 109, (106 and 109 may be taken concurrently) Physics 7B or equivalent

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Morris, Szeri

Microscale Fluid Mechanics: Read Less [-]

Terms offered: Fall 2020, Spring 2019, Fall 2017
This course covers major aspects of offshore engineering including ocean environment, loads on offshore structures, cables and mooring, underwater acoustics and arctic operations.
Mechanics of Offshore Systems: Read More [+]

Objectives & Outcomes

Course Objectives: To provide a basic to intermediate level of treatment of engineering systems that operate in coastal, offshore, and arctic environment. Students will acquire an understanding of the unique and essential character of the marine fields and the analysis tools to handle the engineering aspects of them.

Rules & Requirements

Prerequisites: MEC ENG C85 / CIV ENG C30 and MEC ENG 106; MEC ENG 165 is recommended

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Alam

Mechanics of Offshore Systems: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018
This course builds upon material learned in 104, examining the dynamics of particles and rigid bodies moving in three dimensions. Topics include non-fixed axis rotations of rigid bodies, Euler angles and parameters, kinematics of rigid bodies, and the Newton-Euler equations of motion for rigid bodies. The course material will be illustrated with real-world examples such as gyroscopes, spinning tops, vehicles, and satellites. Applications of the material range from vehicle navigation to celestial mechanics, numerical simulations, and animations.
Engineering Mechanics III: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 104 or consent of instructor

Hours & Format

Fall and/or spring: 15 weeks - 3-3 hours of lecture and 0-1 hours of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: O'Reilly, Casey

Engineering Mechanics III: Read Less [-]

Terms offered: Spring 2017, Spring 2013, Spring 2011
Plane and spherical sound waves. Sound intensity. Propagation in tubes and horns. Resonators. Standing waves. Radiation from oscillating surface. Reciprocity. Reverberation and diffusion. Electro-acoustic loud speaker and microphone problems. Environmental and architectural acoustics. Noise measurement and control. Effects on man.
Fundamentals of Acoustics: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 104

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Johnson

Fundamentals of Acoustics: Read Less [-]

Terms offered: Not yet offered
Oscillations in nonlinear systems having one or two degrees of freedom. Graphical, iteration, perturbation, and asymptotic methods. Self-excited oscillations and limit cycles. Random variables and random processes. Analysis of linear and nonlinear, discrete and continuous, mechanical systems under stationary and non-stationary excitations.

Nonlinear and Random Vibrations: Read More [+]

Objectives & Outcomes

Course Objectives: To give a compact, consistent, and reasonably connected account of the theory of nonlinear vibrations and uncertainty analysis. Applications will be mentioned whenever feasible. A secondary purpose is to survey some topics of contemporary research.

Student Learning Outcomes: Acquired necessary knowledge and scientific maturity to apply methods of nonlinear and uncertainty analysis in engineering design and optimization.

An ability to apply knowledge of mathematics, science, and engineering. An ability to identify, formulate, and solve engineering problems. The broad education necessary to understand the impact of engineering solutions in a global and societal context. A knowledge of contemporary issues. An ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.
This course provides valuable training in the modeling and analysis of mechanical engineering systems using nonlinear and uncertainty analysis. It also serves to reinforce and emphasize the connection between fundamental engineering science and practical problem solving.

Rules & Requirements

Prerequisites: MEC ENG 104

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Ma

Nonlinear and Random Vibrations: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
This course introduces and investigates Lagrange's equations of motion for particles and rigid bodies. The subject matter is particularly relevant to applications comprised of interconnected and constrained discrete mechanical components. The material is illustrated with numerous examples. These range from one-dimensional motion of a single particle to three-dimensional motions of rigid bodies and systems of rigid bodies.
Intermediate Dynamics: Read More [+]

Objectives & Outcomes

Course Objectives: Introduce students to the notion of exploiting differential geometry to gain insight into the dynamics of a mechanical system. Familiarize the student with classifications and applications of generalized forces and kinematical constraints. Enable the student to establish Lagrange's equations of motion for a single particle, a system of particles and a single rigid body. Establish equivalence of equations of motion using the Lagrange and Newton-Euler approaches. Discuss the developments of analytical mechanics drawing from applications in navigation, vehicle dynamics, toys, gyroscopes, celestial mechanics, satellite dynamics and computer animation.

Student Learning Outcomes: This course provides valuable training in the modeling and analysis of mechanical engineering systems using systems of particles and/or rigid bodies. It also serves to reinforce and emphasize the connection between fundamental engineering science and practical problem-solving.
a) An ability to apply knowledge of mathematics, science, and engineering.
e) An ability to identify, formulate, and solve engineering problems.
h) The broad education necessary to understand the impact of engineering solutions in a global and societal context.
j) A knowledge of contemporary issues.
k) An ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Rules & Requirements

Prerequisites: MEC ENG 104

Credit Restrictions: Students will receive no credit for MEC ENG 175 after completing MEC ENG 271.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: O'Reilly, Casey

Intermediate Dynamics: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Spring 2019
Statics, dynamics, optimization theory, composite beam theory, beam-on-elastic foundation theory, Hertz contact theory, and materials behavior. Forces and moments acting on human joints; composition and mechanical behavior of orthopedic biomaterials; design/analysis of artificial joint, spine, and fracture fixation prostheses; musculoskeletal tissues including bone, cartilage, tendon, ligament, and muscle; osteoporosis and fracture-risk predication of bones; and bone adaptation. MATLAB-based project to integrate the course material.
Orthopedic Biomechanics: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG C85 / CIV ENG C30 or BIO ENG 102 (concurrent enrollment OK). Proficiency in MatLab or equivalent. Prior knowledge of biology or anatomy is not assumed

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Keaveny

Also listed as: BIO ENG C119

Orthopedic Biomechanics: Read Less [-]

Terms offered: Fall 2019, Fall 2018, Fall 2017
The course provides project-based learning experience in understanding product design, with a focus on the human body as a mechanical machine. Students will learn the design of external devices used to aid or protect the body. Topics will include forces acting on internal materials (e.g., muscles and total replacement devices), forces acting on external materials (e.g., prothetics and crash pads), design/analysis of devices aimed to improve or fix the human body, muscle adaptation, and soft tissue injury. Weekly laboratory projects will incorporate EMG sensing, force plate analysis, and interpretation of data collection (e.g., MATLAB analysis) to integrate course material to better understand contemporary design/analysis/problems.
Designing for the Human Body: Read More [+]

Objectives & Outcomes

Course Objectives: The purpose of this course is twofold:
•
to learn the fundamental concepts of designing devices to interact with the human body;
•
to enhance skills in mechanical engineering and bioengineering by analyzing the behavior of various complex biomedical problems;
•
To explore the transition of a device or discovery as it goes from “benchtop to bedside”.

Student Learning Outcomes: RELATIONSHIP OF THE COURSE TO ABET PROGRAM OUTCOMES
(a) an ability to apply knowledge of mathematics, science, and engineering
(b) an ability to design and conduct experiments, as well as to analyze and interpret data
(d) an ability to function on multi-disciplinary teams
(e) an ability to identify, formulate, and solve engineering problems
(f) an understanding of professional and ethical responsibility
(g) an ability to communicate effectively
(h) the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context
(i) a recognition of the need for, and an ability to engage in life-long learning
(j) a knowledge of contemporary issues
(k) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Working knowledge of design considerations for creating a device to protect or aid the human body, force transfer and distribution, data analysis, and FDA approval process for new devices. Understanding of basic concepts in orthopaedic biomechanics and the ability to apply the appropriate engineering concepts to solve realistic biomechanical problems, knowing clearly the assumptions involved. Critical analysis of current literature and technology.

Rules & Requirements

Prerequisites: PHYSICS 7A, MATH 1A, and MATH 1B. Proficiency in MatLab or equivalent. Prior knowledge of biology or anatomy is not assumed

Credit Restrictions: There will be no credit given for MEC ENG C178 / BIO ENG C137 after taking MEC ENG 178.

Hours & Format

Fall and/or spring: 15 weeks - 1-3 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Instructor: O'Connell

Formerly known as: Mechanical Engineering 178

Also listed as: BIO ENG C137

Designing for the Human Body: Read Less [-]

Terms offered: Spring 2020
This course provides hands-on experience in designing prostheses and assistive technologies using user-centered design. Students will develop a fundamental understanding of the state-of-the-art, design processes and product realization. Teams will prototype a novel solution to a disabilities-related challenge, focusing on upper-limb mobility or dexterity. Lessons will cover biomechanics of human manipulation, tactile sensing and haptics, actuation and mechanism robustness, and control interfaces. Readings will be selected from texts and academic journals available through the UCB online library system and course notes. Guest speakers will be invited to address cutting edge breakthroughs relevant to assistive technology and design.
Augmenting Human Dexterity: Read More [+]

Objectives & Outcomes

Course Objectives: The course objectives are to:
- Learn the fundamental principles of biomechanics, dexterous manipulation, and electromechanical systems relevant for non-invasive, cutting-edge assistive device and prosthesis design.
- Enhance skill in the areas of human-centered design, teamwork and communication through the practice of conducting labs and a project throughout the semester.

Rules & Requirements

Prerequisites: MEC ENG 132; MEC ENG C178 / BIO ENG C137 or MEC ENG C176 / BIO ENG C119; and proficiency with Matlab or equivalent program

Credit Restrictions: Students will receive no credit for MEC ENG 179 after completing MEC ENG 270.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 3 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Instructor: Stuart

Augmenting Human Dexterity: Read Less [-]

Terms offered: Spring 2020, Fall 2019, Spring 2019
This is an introductory course on the finite element method and is intended for seniors in engineering and applied science disciplines. The course covers the basic topics of finite element technology, including domain discretization, polynomial interpolation, application of boundary conditions, assembly of global arrays, and solution of the resulting algebraic systems. Finite element formulations for several important field equations are introduced using both direct and integral approaches. Particular emphasis is placed on computer simulation and analysis of realistic engineering problems from solid and fluid mechanics, heat transfer, and electromagnetism. The course uses FEMLAB, a multiphysics MATLAB-based finite element program that possesses a wide array of modeling capabilities and is ideally suited for instruction. Assignments will involve both paper- and computer-based exercises. Computer-based assignments will emphasize the practical aspects of finite element model construction and analysis.
Engineering Analysis Using the Finite Element Method: Read More [+]

Rules & Requirements

Prerequisites: Engineering 7 or 77 or Computer Science 61A; Mathematics 53 and 54; senior status in engineering or applied science

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 2 hours of laboratory per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Also listed as: CIV ENG C133

Engineering Analysis Using the Finite Element Method: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
This course is a general introduction to the fundamental concepts of the mechanics of continuous media. Topics covered include the kinematics of deformation, the concept of stress, and the conservation laws for mass, momentum and energy. This is followed by an introduction to constitutive theory with applications to well-established models for viscous fluids and elastic solids. The concepts are illustrated through the solution of tractable initial-boundary-value problems. This course presents foundation-level coverage of theory underlying a number of sub-fields, including Fluid Mechanics, Solid Mechanics and Heat Transfer.
Introduction to Continuum Mechanics: Read More [+]

Objectives & Outcomes

Course Objectives: Students will gain a deep understanding of the concepts and methods underlying modern continuum mechanics. The course is designed to equip students with the background needed to pursue advanced work in allied fields.

Student Learning Outcomes: ABET Outcomes:
(a) an ability to apply knowledge of mathematics, science, and engineering,
(e) an ability to identify, formulate, and solve engineering problems,
(g) an ability to communicate effectively,
(h) the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context,
(i) a recognition of the need for, and an ability to engage in life-long learning,
(k) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Rules & Requirements

Prerequisites: PHYSICS 7A, MATH 53, and MATH 54; some prior exposure to the elementary mechanics of solids and fluids

Credit Restrictions: Students will not receive credit if they have taken ME 287.

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructors: Casey, Johnson, Papadopoulos, Steigmann

Introduction to Continuum Mechanics: Read Less [-]

Terms offered: Spring 2018, Fall 2015, Spring 2014
After a review of basic loopshaping, we introduce the loopshaping design methodology of McFarlane and Glover, and learn how to use it effectively. The remainder of the course studies the mathematics underlying the new method (one of the most prevalent advanced techniques used in industry) justifying its validity.
Practical Control System Design: A Systematic Loopshaping Approach: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 132, MEC ENG C134/EL ENG C128, or similar introductory experience regarding feedback control systems

Hours & Format

Fall and/or spring: 15 weeks - 1 hour of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Packard

Practical Control System Design: A Systematic Loopshaping Approach: Read Less [-]

Terms offered: Spring 2015, Fall 2009
Basics on optimization and polyhedra manipulation. Analysis and design of constrained predictive controllers for linear and nonlinear systems.
Model Predictive Control: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 132

Hours & Format

Fall and/or spring: 15 weeks - 1 hour of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam not required.

Instructor: Borrelli

Model Predictive Control: Read Less [-]

Terms offered: Spring 2013, Spring 2010, Spring 2009
The Youla-parametrization of all stabilizing controllers allows certain time-domain and frequency-domain closed-loop design objectives to be cast as convex optimizations, and solved reliably using off-the-shelf numerical optimization codes. This course covers the Youla parametrization, basic elements of convex optimization, and finally control design using these techniques.
Practical Control System Design: A Systematic Optimization Approach: Read More [+]

Rules & Requirements

Prerequisites: MEC ENG 132, MEC ENG C134/EL ENG C128, or similar introductory experience regarding feedback control systems

Hours & Format

Fall and/or spring: 15 weeks - 1 hour of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Packard

Practical Control System Design: A Systematic Optimization Approach: Read Less [-]

Terms offered: Fall 2020, Summer 2020 First 6 Week Session, Summer 2020 Second 6 Week Session
This course is designed to enhance students' written and oral communication skills. Written work consists of informal documents--correspondence, internal reports, and reviews--and formal work--proposals, conference papers, journal articles, and websites. Presentations consist of informal and formal reports, including job and media interviews, phone interviews, conference calls, video conferences, progress reports, sales pitches, and feasibility studies.
Professional Communication: Read More [+]

Rules & Requirements

Prerequisites: Reading and Composition parts A and B

Hours & Format

Fall and/or spring: 15 weeks - 3 hours of lecture per week

Summer:
6 weeks - 8 hours of lecture per week
8 weeks - 5.5 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Alternative to final exam.

Professional Communication: Read Less [-]

Terms offered: Spring 2017
This 193 series covers current topics of research interest in biomechanical engineering. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in Biomechanical Engineering: Read More [+]

Objectives & Outcomes

Course Objectives: Course objectives will vary.

Student Learning Outcomes: Student outcomes will vary.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Faculty

Special Topics in Biomechanical Engineering: Read Less [-]

Terms offered: Fall 2020, Fall 2019, Fall 2018
This 193 series covers current topics of research interest in controls. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in Controls: Read More [+]

Objectives & Outcomes

Course Objectives: Will vary with course.

Student Learning Outcomes: Will vary with course.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Special Topics in Controls: Read Less [-]

Terms offered: Fall 2018, Fall 2016
This 193 series covers current topics of research interest in design. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in Design: Read More [+]

Objectives & Outcomes

Course Objectives: Will vary with course.

Student Learning Outcomes: Will vary with course.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Faculty

Special Topics in Design: Read Less [-]

Terms offered: Prior to 2007
This 193 series covers current topics of research interest in dynamics. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in Dynamics: Read More [+]

Objectives & Outcomes

Course Objectives: Will vary with course.

Student Learning Outcomes: Will vary with course.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Faculty

Special Topics in Dynamics: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018
This 193 series covers current topics of research interest in energy science and technology. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in Energy Science and Technology: Read More [+]

Objectives & Outcomes

Course Objectives: Will vary with course.

Student Learning Outcomes: Will vary with course.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Faculty

Special Topics in Energy Science and Technology: Read Less [-]

Terms offered: Prior to 2007
This 193 series covers current topics of research interest in fluids. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in Fluids: Read More [+]

Objectives & Outcomes

Course Objectives: Will vary with course.

Student Learning Outcomes: Will vary with course.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Faculty

Special Topics in Fluids: Read Less [-]

Terms offered: Prior to 2007
This 193 series covers current topics of research interest in manufacturing. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in Manufacturing: Read More [+]

Objectives & Outcomes

Course Objectives: Will vary by course.

Student Learning Outcomes: Will vary by course.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Faculty

Special Topics in Manufacturing: Read Less [-]

Terms offered: Spring 2020
This 193 series covers current topics of research interest in materials. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in Materials: Read More [+]

Objectives & Outcomes

Course Objectives: Will vary with course.

Student Learning Outcomes: Will vary with course.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Faculty

Special Topics in Materials: Read Less [-]

Terms offered: Prior to 2007
This 193 series covers current topics of research interest in mechanics. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in Mechanics: Read More [+]

Objectives & Outcomes

Course Objectives: Will vary with course.

Student Learning Outcomes: Will vary with course.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Faculty

Special Topics in Mechanics: Read Less [-]

Terms offered: Prior to 2007
This 193 series covers current topics of research interest in MEMS/nano. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in MEMS/Nano: Read More [+]

Objectives & Outcomes

Course Objectives: Will vary with course.

Student Learning Outcomes: Will vary with course.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Faculty

Special Topics in MEMS/Nano: Read Less [-]

Terms offered: Prior to 2007
This 193 series covers current topics of research interest in ocean engineering. The course content may vary semester to semester. Check with the department for current term topics.
Special Topics in Ocean Engineering: Read More [+]

Objectives & Outcomes

Course Objectives: Will vary by course.

Student Learning Outcomes: Will vary by course.

Rules & Requirements

Repeat rules: Course may be repeated for credit when topic changes.

Hours & Format

Fall and/or spring:
6 weeks - 2.5-10 hours of lecture per week
8 weeks - 2-7.5 hours of lecture per week
10 weeks - 1.5-6 hours of lecture per week
15 weeks - 1-4 hours of lecture per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Instructor: Faculty

Special Topics in Ocean Engineering: Read Less [-]

Terms offered: Fall 2020, Summer 2020 8 Week Session, Summer 2020 Second 6 Week Session
Final report required. Students who have completed a satisfactory number of advanced courses may pursue original research under the direction of one of the members of the faculty. A maximum of three units of H194 may be used to fulfill technical elective requirements in the Mechanical Engineering program (unlike 198 or 199, which do not satisfy technical elective requirements). Students can use a maximum of three units of graded research units (H194 or 196) towards their technical elective requirement.
Honors Undergraduate Research: Read More [+]

Rules & Requirements

Prerequisites: 3.3 cumulative GPA or higher, consent of instructor and adviser, and senior standing

Repeat rules: Course may be repeated for credit without restriction.

Hours & Format

Fall and/or spring: 15 weeks - 2-4 hours of independent study per week

Summer:
6 weeks - 1-5 hours of independent study per week
8 weeks - 4-8 hours of independent study per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam not required.

Honors Undergraduate Research: Read Less [-]

Terms offered: Fall 2020, Summer 2020 Second 6 Week Session, Spring 2020
Students who have completed a satisfactory number of advanced courses may pursue original research under the direction of one of the members of the staff. A maximum of three units of 196 may be used to fulfill technical elective requirements in the Mechanical Engineering program (unlike 198 or 199, which do not satisfy technical elective requirements). Students can use a maximum of three units of graded research units (H194 or 196) towards their technical elective requirement. Final report required.
Undergraduate Research: Read More [+]

Rules & Requirements

Prerequisites: Consent of instructor and adviser; junior or senior standing

Repeat rules: Course may be repeated for credit without restriction.

Hours & Format

Fall and/or spring: 15 weeks - 2-4 hours of independent study per week

Summer:
6 weeks - 5-10 hours of independent study per week
8 weeks - 4-8 hours of independent study per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Letter grade. Final exam required.

Undergraduate Research: Read Less [-]

Terms offered: Fall 2015, Summer 2015 10 Week Session
Supervised experience relative to specific aspects of practice in engineering. Under guidance of a faculty member, the student will work in industry, primarily in an internship setting or another type of short-time status. Emphasis is to attain practical experience in the field.
Undergraduate Engineering Field Studies: Read More [+]

Objectives & Outcomes

Student Learning Outcomes: (h) the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context
(j) a knowledge of contemporary issues
(k) an ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Rules & Requirements

Repeat rules: Course may be repeated for credit without restriction.

Hours & Format

Fall and/or spring: 15 weeks - 3-12 hours of internship per week

Summer:
6 weeks - 8-30 hours of internship per week
10 weeks - 5-18 hours of internship per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.

Undergraduate Engineering Field Studies: Read Less [-]

Terms offered: Spring 2020, Spring 2019, Spring 2018
Group study of a selected topic or topics in Mechanical Engineering. Credit for 198 or 199 courses combined may not exceed 4 units in any single term. See College for other restrictions.
Directed Group Studies for Advanced Undergraduates: Read More [+]

Rules & Requirements

Prerequisites: Upper division standing and good academic standing

Repeat rules: Course may be repeated for credit without restriction.

Hours & Format

Fall and/or spring: 15 weeks - 1-4 hours of directed group study per week

Summer: 10 weeks - 1.5-6 hours of directed group study per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.

Directed Group Studies for Advanced Undergraduates: Read Less [-]

Terms offered: Fall 2020, Spring 2020, Fall 2019
Supervised independent study. Enrollment restrictions apply; see the introduction to Courses and Curricula section of this catalog.
Supervised Independent Study: Read More [+]

Rules & Requirements

Prerequisites: Consent of instructor and major adviser

Repeat rules: Course may be repeated for credit without restriction.

Hours & Format

Fall and/or spring: 15 weeks - 1-4 hours of independent study per week

Summer:
6 weeks - 1-5 hours of independent study per week
8 weeks - 1-4 hours of independent study per week

Additional Details

Subject/Course Level: Mechanical Engineering/Undergraduate

Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.

Supervised Independent Study: Read Less [-]

Faculty and Instructors

+ Indicates this faculty member is the recipient of the Distinguished Teaching Award.

Faculty

Joel W. Ager, Adjunct Professor.

Zakaria Y. Al Balushi, Assistant Professor. Electronic, Magnetic and Optical Materials, Quantum Materials Synthesis and Optoelectronics.
Research Profile

Paul Alivisatos, Professor. Physical chemistry, semiconductor nanocrystals, nanoscience, nanotechnology, artificial photosynthesis, solar energy, renewable energy, sustainable energy.
Research Profile

Mark D. Asta, Professor.

Jillian Banfield, Professor. Nanoscience, Bioremediation, genomics, biogeochemistry, carbon cycling, geomicrobiology, MARS, minerology.
Research Profile

Robert Birgeneau, Professor. Physics, phase transition behavior of novel states of matter.
Research Profile

Gerbrand Ceder, Professor.

Daryl Chrzan, Professor. Materials science and engineering, computational materials science, metals and metallic compounds, defects in solids, growth of nanostructures.
Research Profile

Thomas M. Devine, Professor. Synthesis of nanomaterials, nuclear power, oil production, secondary batteries for electric vehicles, computer disk drives, and synthesis and characterization of metal oxide nanowires, corrosion resistance of materials.
Research Profile

Fiona Doyle, Professor. Electrochemistry, mineral processing, solution processing of materials, interfacial chemistry, extractive metallurgy, remediation of abandoned mines.
Research Profile

Oscar D. Dubon, Professor. Magnetic, optical materials, processing, properties in electronic.
Research Profile

Kevin Healy, Professor. Bioengineering, biomaterials engineering, tissue engineering, bioinspired materials, tissue and organ regeneration, stem cell engineering, microphysiological systems, organs on a chip, drug screening and discovery, multivalent bioconjugate therapeutics.
Research Profile

Frances Hellman, Professor. Condensed matter physics and materials science.
Research Profile

Lane W. Martin, Associate Professor. Complex Oxides, novel electronic materials, thin films, materials processing, materials characterization, memory, logic, information technologies, energy conversion, thermal properties, dielectrics, ferroelectrics, pyroelectrics, piezoelectrics, magnetics, multiferroics, transducers, devices.
Research Profile

Phillip B. Messersmith, Professor.

Andrew M. Minor, Professor. Metallurgy, nanomechanics, in situ TEM, electron microscopy of soft materials.
Research Profile

Kristin A. Persson, Assistant Professor. Lithium-ion Batteries.
Research Profile

R. Ramesh, Professor. Processing of complex oxide heterostructures, nanoscale characterization/device structures, thin film growth and materials physics of complex oxides, materials processing for devices, information technologies.
Research Profile

Robert O. Ritchie, Professor. Structural materials, mechanical behavior in biomaterials, creep, fatigue and fracture of advanced metals, intermetallics, ceramics.
Research Profile

Miquel B. Salmeron, Adjunct Professor. Molecules, lasers, atoms, materials science and engineering, matter, scanning, tunneling, atomic force microscopies, x-ray photoelectron spectroscopy.
Research Profile

Mary Scott, Assistant Professor. Structural materials, Electronic, Magnetic and Optical Materials, and Chemical and Electrochemical Materials.
Research Profile

Junqiao Wu, Associate Professor. Semiconductors, nanotechnology, energy materials.
Research Profile

Ting Xu, Associate Professor. Polymer, nanocomposite, biomaterial, membrane, directed self-assembly, drug delivery, protein therapeutics, block copolymers, nanoparticles.
Research Profile

Peidong Yang, Professor. Materials chemistry, sensors, nanostructures, energy conversion, nanowires, miniaturizing optoelectronic devices, photovoltaics, thermoelectrics, solid state lighting.
Research Profile

Jie Yao, Assistant Professor. Optical materials, Nanophotonics, optoelectronics.
Research Profile

Haimei Zheng, Assistant Adjunct Professor.

Lecturers

Matthew Sherburne, Lecturer.

Emeritus Faculty

Robert H. Bragg, Professor Emeritus.

Didier De Fontaine, Professor Emeritus. Phase transformations in alloys, crystallography, thermodynamics of phase changes, particularly ordering reactions, phase separation, calculations of phase equilibria by combined quantum, statistical mechanical methods.
Research Profile

Lutgard De Jonghe, Professor Emeritus. Ceramic properties, advanced ceramics, silicon carbide, densification studies, microstructure development.
Research Profile

James W. Evans, Professor Emeritus. Production of materials, particularly fluid flow, reaction kinetics, mass transport, electrochemical, electromagnetic phenomena governing processes for producing materials, metals, storing energy.
Research Profile

+ Douglas W. Fuerstenau, Professor Emeritus. Mineral processing, extractive metallurgy, application of surface, colloid chemistry to mineral/water systems, fine particle science, technology, principles of comminution, flotation, pelletizing, hydrometallurg, extraction of metals.
Research Profile

Andreas M. Glaeser, Professor Emeritus. Ceramic joining, TLP bonding, brazing, reduced-temperature joining, ceramic-metal joining, ceramic processing, surface and interface properties of ceramics, thermal barrier coatings.
Research Profile

+ Ronald Gronsky, Professor Emeritus. Internal structure of materials, engineering applications.
Research Profile

Eugene E. Haller, Professor Emeritus. Semiconductor crystal growth, characterization of impurities and defects in semiconductors: infrared and microwave detectors, isotopically controlled semiconductors.
Research Profile

Digby D. Macdonald, Professor Emeritus.

Marshal F. Merriam, Professor Emeritus.

+ J. W. Morris, Professor Emeritus. Structural materials, computational materials, the limits of strength, deformation mechanisms, non-destructive testing with SQUID microscopy, mechanisms of grain refinement in high strength steels, lead-free solders for microelectronics.
Research Profile

Eicke R. Weber, Professor Emeritus. Optical materials, magnetic materials, semiconductor thin film growth, device processing in electronic materials.
Research Profile

+ Indicates this faculty member is the recipient of the Distinguished Teaching Award.

Faculty

Alice M. Agogino, Professor. New product development, computer-aided design and databases, theory and methods, intelligent learning systems, information retrieval and data mining, digital libraries, multiobjective and strategic product, nonlinear optimization, probabilistic modeling, supervisory.
Research Profile

M. Reza Alam, Assistant Professor. Theoretical Fluid Dynamics, Nonlinear Wave Mechanics, Ocean and Coastal Waves Phenomena, Ocean Renewable Energy (Wave, Tide and Offshore Wind Energy), Nonlinear Dynamical Systems, Fluid Flow Control, ocean renewable energy.
Research Profile

Francesco Borrelli, Associate Professor. Automotive control systems, distributed and robust constrained control, manufacturing control systems, energy efficient buildings, model predictive control .
Research Profile

Van P. Carey, Professor. Mechanical engineering, non-equilibirum thermodynamics, statistical thermodynamics, microscale thermophysics, biothermodynamics, computer aided thermal design, thermodynamic analysis of green manufacturing.
Research Profile

James Casey, Professor. Continuum mechanics, finite elasticity, continuum thermodynamics, plasticity, theories of elastic-plastic materials, history of mechanics, dynamics.
Research Profile

Jyh-Yuan Chen, Professor. Computational modeling of reactive systems, turbulent flows, combustion chemical kinetics.
Research Profile

Chris Dames, Associate Professor.
Research Profile

Carlos Fernandez-Pello, Professor. Biofuels, heat transfer, fire, combustion, ignition and fire spread, wildland fire spotting, smoldering and flaming, small scale energy generation.
Research Profile

Michael Frenklach, Professor. Silicon carbide, chemical kinetics, computer modeling, combustion chemistry, pollutant formation (NOx, soot), shock tube, chemical vapor deposition of diamond films, homogeneous nucleation of silicon, diamond powders, interstellar dust formation.
Research Profile

Kosa Goucher-Lambert, Assistant Professor. Design theory, methodology, and automation: decision-making applied to engineering teams and individuals, ideation and creativity, analogical reasoning in design, preference modeling and design attribute optimization, design cognition, neuroimaging methods applied to design, sustainable design, new product development, crowdsourcing and collaboration.

Costas P. Grigoropoulos, Professor. Heat transfer, laser materials processing, nano-manufacturing, energy systems and technology.
Research Profile

Grace Gu, Assistant professor. Composites, additive manufacturing, fracture mechanics, topology optimization, machine learning, finite element analysis, and bioinspired materials.
Research Profile

Roberto Horowitz, Professor. Adaptive control, learning and nonlinear control, control of robot manipulators, computer mechatronics systems, micro-electromechanical systems (MEMS), intelligent vehicle, highways systems.
Research Profile

George C. Johnson, Professor. X-rays, plasticity, elasticity, instrumentation, sensors, acoustoelasticity, materials behavior, materials characterization, texture analysis, thin shells deformation, ultrasonic stress analysis.
Research Profile

Homayoon Kazerooni, Professor. Robotics, bioengineering, design, control systems, mechatronics, automated manufacturing, human-machine systems.
Research Profile

Tony M. Keaveny, Professor. Biomechanics of bone, orthopaedic biomechanics, design of artificial joints, osteoporosis, finite element modeling, clinical biomechanics.
Research Profile

Kyriakos Komvopoulos, Professor. Contact mechanics, fracture and fatigue of engineering materials, finite element modeling of surface contact and machining, thin-film processing and characterization, adhesion and fatigue of MEMS devices, plasma-assisted surface functionalization of biomaterials, surface patterning for cell adhesion and growth control, mechanics and tribology of magnetic recording devices, mechanotransduction effects in natural cartilage, microfibrous scaffolds for tissue engineering, surface nanoengineering techniques, tribology and mechanics of artificial joints.
Research Profile

Dorian Liepmann, Professor. Bioengineering, mechanical engineering, bioMEMS, biosensors, microfluid dynamics, experimental biofluid dynamics, hemodynamics, valvular heart disease, cardiac flows, arterial flows.
Research Profile

+ Dennis K. Lieu, Professor. Actuators, magnetics, acoustics, electromechanical devices, rolling elements, spindle motors, structural mechanics.
Research Profile

Liwei Lin, Professor. Nanotechnology, MEMS (microelectromechanical systems), NEMS (nanoelectromechanical systems), design and manufacturing of microsensors, microactuators, development of micromachining processes, silicon surface/bulk micromachining, micromolding process.
Research Profile

Fai Ma, Professor. Dynamical systems with inherent uncertainties, vibration, stochastic simulation.
Research Profile

Simo Aleksi Makiharju, Assistant Professor.

Samuel Mao, Associate Adjunct Professor. Mechanical engineering, processing, materials, energy transport, conversion and storage, nano, micro and meso scale, phenomena and devices, laser-material interactions, nonlinear science.
Research Profile

Sara Mcmains, Associate Professor. Geometric and solid modeling, general purpose computation on the GPU (GPGPU), CAD/CAM, computational geometry, layered manufacturing, computer graphics and visualization, virtual prototyping, virtual reality.
Research Profile

Mohammad Mofrad, Professor. Nuclear pore complex and nucleocytoplasmic transport, mechanobiology of disease, cellular mechanotransduction, integrin-mediated focal adhesions.
Research Profile

Stephen Morris, Professor. Continuum mechanics, micro mechanics of solid-solid phase changes, interfacial phenomena (evaporating thin films), electroporation .
Research Profile

Grace O'Connell, Assistant Professor. Tissue engineering, biomechanics, intervertebral disc, cartilage.
Research Profile

+ Oliver O'Reilly, Professor. Continuum mechanics, vibrations, dynamics.
Research Profile

+ Andrew Packard, Professor. Design, robustness issues in control analysis, linear algebra, numerical algorithms in control problems, applications of system theory to aerospace problems, flight control, control of fluid.
Research Profile

Panayiotis Papadopoulos, Professor. Continuum mechanics, computational mechanics, contact mechanics, computational plasticity, materials modeling, solid mechanics, applied mathematics, dynamics of pseudo-rigid bodies.
Research Profile

+ Kameshwar Poolla, Professor. Cybersecurity, modeling, control, renewable energy, estimation, integrated circuit design and manufacturing, smart grids.
Research Profile

+ Lisa Pruitt, Professor. Tissue biomechanics, biomaterial science, fatigue and fracture micromechanisms, orthopedic polymers for total joint replacement, cardiovascular biomaterials, synthetic cartilage, acrylic bone cements, tribology of diamond and DLCs.
Research Profile

Robert O. Ritchie, Professor. Structural materials, mechanical behavior in biomaterials, creep, fatigue and fracture of advanced metals, intermetallics, ceramics.
Research Profile

S. Shankar Sastry, Professor. Computer science, robotics, arial robots, cybersecurity, cyber defense, homeland defense, nonholonomic systems, control of hybrid systems, sensor networks, interactive visualization, robotic telesurgery, rapid prototyping.
Research Profile

Omer Savas, Professor. Fluid mechanics.
Research Profile

Shawn Shadden, Associate Professor.

Lydia Sohn, Professor. Micro-nano engineering.
Research Profile

David Steigmann, Professor. Finite elasticity, mechanics, continuum, shell theory, variational methods, stability, surface stress, capillary phenomena, mechanics of thin films.
Research Profile

Hannah Stuart, Assistant Professor. Dexterous manipulation, bioinspired design, soft and multi-material mechanisms, skin contact conditions, tactile sensing and haptics.
Research Profile

Andrew Szeri, Professor. Biomedical engineering, fluid dynamics, dynamical systems.
Research Profile

Hayden Taylor, Assistant Professor. Manufacturing, microfabrication, nanofabrication, semiconductor manufacturing, computational mechanics, nanoimprint lithography.
Research Profile

Masayoshi Tomizuka, Professor. Mechatronics, control systems theory, digital control, dynamic systems, mechanical vibrations, adaptive and optimal control, motion control.
Research Profile

Paul K. Wright, Professor. Mechanical and electrical engineering design, 3D-printing, manufacturing, energy systems, wireless sensor networks, sensors/MEMS/NEMS, IT systems, automated manufacturing and inspection.
Research Profile

Kazuo Yamazaki, Professor. Etc , micro custom diamond tool design and fabrication system, CNC machine tool control software and hardware system, ultrasonic milling, intelligent manufacturing systems, mechatronics control hardware and software for manufacturing processes and equipment, computer aided manufacturing system for five axis, milling - turning integrated machining process, nano/micro mechanical machining processes and equipment, precision metrology for nano/micro mechanical machining, Non-traditional manufacturing processes such as electric discharge machining, laser machining and electron beam finishing.
Research Profile

Ronald W. Yeung, Professor. Mathematical modeling, hydromechanics, naval architecture, numerical fluid mechanics, offshore mechanics, ocean processes, separated flows, wave-vorticity interaction, vortex-induced vibrations, stratified fluid flow, ocean energy, green ships, tidal energy, multi-hull flow physics, Helmholtz resonance, ship motion instabilities, tank resonance.
Research Profile

Xiang Zhang, Professor. Mechanical engineering, rapid prototyping, semiconductor manufacturing, photonics, micro-nano scale engineering, 3D fabrication technologies, microelectronics, micro and nano-devices, nano-lithography, nano-instrumentation, bio-MEMS.
Research Profile

+ Tarek Zohdi, Professor. Finite element methods, computational methods for advanced manufacturing, micro-structural/macro-property inverse problems involving optimization and design of new materials, modeling and simulation of high-strength fabric, modeling and simulation of particulate/granular flows, modeling and simulation of multiphase/composite electromagnetic media, modeling and simulation of the dynamics of swarms.
Research Profile

Lecturers

George Anwar, Lecturer.

+ Sara Beckman, Senior Lecturer SOE. Business, innovation, management, product development, operations strategy, environmental supply chain management.
Research Profile

Robert Hennigar, Lecturer.

Marcel Kristel, Lecturer.

Christopher Layne Myers, Lecturer.

David B. Rich, Lecturer.

Michael Shiloh, Lecturer.

Julie Sinistore, Lecturer.

Kourosh (Ken) Youssefi, Lecturer.

Contact Information

Department of Materials Science and Engineering

210 Hearst Memorial Mining Building

Phone: 510-642-3801

Fax: 510-643-5792

Visit Department Website

Department of Mechanical Engineering

6141 Etcheverry Hall

Phone: 510-642-1338

Fax: 510-642-6163

http://www.me.berkeley.edu/

Department Chair, Materials Science and Engineering

Daryl Chrzan, PhD

384 Hearst Memorial Mining Building

Phone: 510-643-1624

dcchrzan@berkeley.edu

Department Chair, Mechanical Engineering

Roberto Horowitz, PhD

6143 Etcheverry Hall

Phone: 510-643-7013

horowitz@berkeley.edu

Vice-Chair of Instruction, Mechanical Engineering

Costas Grigoropoulos, PhD

6181 Etcheverry Hall

Phone: 510-642-2525

cgrigoro@berkeley.edu

Departmental Student Affairs Advisor, Mechanical Engineering

Ricky Vides

6193 Etcheverry Hall

Phone: 510-642-4094

rickyv72@berkeley.edu

Engineering Student Services Advisor

Kathy Barrett

Phone: 510-642-7594

http://engineering.berkeley.edu/ESS

ess@berkeley.edu

Departmental Student Affairs Advisor, Materials Science and Engineering

Ariana Castro

210A HMMB

Phone: 510-642-0716

msessa@berkeley.edu

Materials Science and Engineering/Mechanical Engineering Joint Major

About the Program

Bachelor of Science (BS)

Admission to the Joint Major

Major Requirements

General Guidelines

Lower Division Requirements

Upper Division Requirements

College Requirements

Students in the College of Engineering must complete no fewer than 120 semester units with the following provisions:

Humanities and Social Sciences (H/SS) Requirement

Class Schedule Requirements

Minimum Academic (Grade) Requirements

Unit Requirements

Normal Progress

UC and Campus Requirements

University of California Requirements

Campus Requirement

Plan of Study

Student Learning Goals

Materials Science

MEASURED CURRICULAR OUTCOMES

EDUCATIONAL OBJECTIVES FOR GRADUATES

Mechanical Engineering

Learning Goals

Skills

Courses

Materials Science and Engineering

MAT SCI 24 Freshman Seminar 1 Unit

MAT SCI 45 Properties of Materials 3 Units

MAT SCI 45L Properties of Materials Laboratory 1 Unit

MAT SCI 102 Bonding, Crystallography, and Crystal Defects 3 Units

MAT SCI 103 Phase Transformations and Kinetics 3 Units

MAT SCI 104 Materials Characterization 3 Units

MAT SCI 104L Materials Characterization Laboratory 1 Unit

MAT SCI 111 Properties of Electronic Materials 4 Units

MAT SCI 112 Corrosion (Chemical Properties) 3 Units

MAT SCI 113 Mechanical Behavior of Engineering Materials 3 Units

MAT SCI 117 Properties of Dielectric and Magnetic Materials 3 Units

MAT SCI C118 Biological Performance of Materials 4 Units

MAT SCI 120 Materials Production 3 Units

MAT SCI 121 Metals Processing 3 Units

MAT SCI 122 Ceramic Processing 3 Units

MAT SCI 123 ELECTRONIC MATERIALS PROCESSING 4 Units

MAT SCI 125 Thin-Film Materials Science 3 Units

MAT SCI 130 Experimental Materials Science and Design 3 Units

MAT SCI 136 Materials in Energy Technologies 4 Units

MAT SCI 140 Nanomaterials for Scientists and Engineers 3 Units

MAT SCI C150 Introduction to Materials Chemistry 3 Units

MAT SCI 151 Polymeric Materials 3 Units

MAT SCI C157 Nanomaterials in Medicine 3 Units

MAT SCI H194 Honors Undergraduate Research 1 - 4 Units

MAT SCI 195 Special Topics for Advanced Undergraduates 1 Unit

MAT SCI 198 Directed Group Studies for Advanced Undergraduates 1 - 4 Units

MAT SCI 199 Supervised Independent Study 1 - 4 Units

Mechanical Engineering Courses

MEC ENG 24 Freshman Seminars 1 Unit

MEC ENG 40 Thermodynamics 3 Units

MEC ENG C85 Introduction to Solid Mechanics 3 Units

MEC ENG W85 Introduction to Solid Mechanics 3 Units

MEC ENG 98 Supervised Independent Group Studies 1 - 4 Units

MEC ENG 100 Electronics for the Internet of Things 4 Units

MEC ENG 101 Introduction to Lean Manufacturing Systems 3 Units

MEC ENG 102B Mechatronics Design 4 Units

MEC ENG 103 Experimentation and Measurements 4 Units

MEC ENG 104 Engineering Mechanics II 3 Units

MEC ENG 106 Fluid Mechanics 3 Units

MEC ENG 108 Mechanical Behavior of Engineering Materials 4 Units

MEC ENG 109 Heat Transfer 3 Units

MEC ENG 110 Introduction to Product Development 3 Units

MEC ENG C115 Molecular Biomechanics and Mechanobiology of the Cell 4 Units

MEC ENG C117 Structural Aspects of Biomaterials 4 Units

MEC ENG 118 Introduction to Nanotechnology and Nanoscience 3 Units

MEC ENG 119 Introduction to MEMS (Microelectromechanical Systems) 3 Units

MEC ENG 120 Computational Biomechanics Across Multiple Scales 3 Units

MEC ENG 122 Processing of Materials in Manufacturing 3 Units

MEC ENG 125 Industry-Associated Capstones in Mechanical Engineering (iACME) 4 Units

MEC ENG 127 Introduction to Composite Materials 3 Units

MEC ENG 130 Design of Planar Machinery 3 Units

MEC ENG 131 Vehicle Dynamics and Control 4 Units