About the Program
Bachelor of Science (BS)
The College of Chemistry offers a major in Chemical Engineering leading to the Bachelor of Science (BS) degree, through the Department of Chemical and Biomolecular Engineering. The program equips the student for professional work in development, design, and operation of chemical processes and of process equipment. Students with high scholastic attainment are well prepared to enter graduate programs. The curriculum is accredited by ABET.
Admission to the Major
For information on admission to the major, please see the College of Chemistry Admissions tab in this Guide.
Minor Program
The Department of Chemical and Biomolecular Engineering offers an undergraduate minor in Chemical Engineering. For information regarding how to declare the minor, please contact the department. Please be sure to consult with your college or school for information on rules regarding overlap of courses between majors and minors.
Joint Major Programs with the College of Engineering
Chemical Engineering/Materials Science and Engineering: BS
Chemical Engineering/Nuclear Engineering: BS
Major Requirements
In addition to the University, campus, and college requirements, listed in the College Requirements tab, students must fulfill the below requirements specific to their major program.
General Guidelines
- A minimum grade point average (GPA) of 2.0 must be maintained in all courses undertaken at UC Berkeley, including those from UC Summer Sessions, UC Education Abroad Program, UC Berkeley in Washington Program, and XB courses from University Extension.
- A minimum GPA of 2.0 in all courses taken in the college is required in order to advance and continue in the upper division.
- A minimum GPA of 2.0 in all upper division courses taken at the University is required to satisfy major requirements.
- Students in the College of Chemistry who receive a grade of D+ or lower in a chemical and biomolecular engineering or chemistry course for which a grade of C- or higher is required must repeat the course at UC Berkeley.
For information regarding grade requirements in specific courses, please see the notes sections below.
For information regarding residence requirements and unit requirements, please see the College Requirements tab.
Lower Division Requirements
Code | Title | Units |
---|---|---|
CHEM 4A | General Chemistry and Quantitative Analysis | 4 |
CHEM 4B | General Chemistry and Quantitative Analysis | 4 |
CHEM 12A | Organic Chemistry | 5 |
CHM ENG 40 | Introduction to Chemical Engineering Design | 2 |
ENGIN 7 | Introduction to Computer Programming for Scientists and Engineers 1 | 4 |
MATH 1A | Calculus | 4 |
MATH 1B | Calculus | 4 |
MATH 53 | Multivariable Calculus | 4 |
MATH 54 | Linear Algebra and Differential Equations | 4 |
PHYSICS 7A | Physics for Scientists and Engineers | 4 |
PHYSICS 7B | Physics for Scientists and Engineers | 4 |
BIOLOGY 1A | General Biology Lecture | 3 |
or BIO ENG 11 | Engineering Molecules 1 | |
Students in the Biotechnology concentration are required to take MCELLBI 102 or CHEM 135 in place of BIOLOGY 1A | ||
MAT SCI 45 | Properties of Materials | 3 |
MAT SCI 45L | Properties of Materials Laboratory | 1 |
Notes
- Students should take CHEM 4A and CHEM 4B during their freshman year, and CHEM 12A and CHEM 12B during their sophomore year.
- A grade of C- or better is required in CHEM 4A before taking CHEM 4B, in CHEM 4B before taking more advanced courses, and in CHEM 12A before taking CHEM 12B.
- A grade of C- or better is required in CHEM 12A before taking BIOLOGY 1A or CHEM 12B.
- All freshmen are required to complete CHM ENG 40 during their first semester.
- A grade of C- or better in CHM ENG 140 is required before enrolling in any other chemical engineering courses.
- ENGIN W7 may be substituted for ENGIN 7.
- ENGIN 7 must be taken before or concurrently with CHM ENG 140 and before CHM ENG 150B.
- Students should start MATH 1A in the first semester of their freshman year.
- Students should start PHYSICS 7A in the second semester of the freshman year.
Upper Division Requirements
Code | Title | Units |
---|---|---|
CHEM 120A | Physical Chemistry | 3-4 |
or PHYSICS 137A | Quantum Mechanics | |
CHM ENG 140 | Introduction to Chemical Process Analysis | 4 |
CHM ENG 141 | Chemical Engineering Thermodynamics | 4 |
CHM ENG 142 | Chemical Kinetics and Reaction Engineering | 4 |
CHM ENG 150A | Transport Processes | 4 |
CHM ENG 150B | Transport and Separation Processes | 4 |
CHM ENG 154 | Chemical Engineering Laboratory | 4 |
CHM ENG 160 | Chemical Process Design | 4 |
CHM ENG 162 | Dynamics and Control of Chemical Processes | 4 |
3 units engineering electives chosen from the Lower Division Engineering Electives List OR the Upper Division Engineering Electives List 1 | 3 | |
Electives and Concentrations: Select one of the following: 2 | ||
Open Elective Program: 12 units (see below for details) | ||
Concetration (see below for details) |
1 | Effective Fall 2017, MSE 45/L is replacing E 45/L. MSE 45L is not required if the student took E 45 during spring 2016 or earlier. However, these students must complete 4 units of engineering elective instead of 3. |
2 | A course used toward satisfaction of the open elective program or a concentration cannot also be used toward satisfaction of another college or major requirement. A maximum of 6 units of research can be applied toward electives. |
Open Elective Program
Students who do not choose a concentration must complete the following requirements for the open elective program:
Code | Title | Units |
---|---|---|
One science elective, selected from physical and biological sciences electives list (see below) | 3 | |
CBE elective 1 | 3 | |
Engineering electives, selected from the engineering electives list 2 | 6 |
1 | CHM ENG 196 may not be used to fulfill this elective requirement. |
2 | Other engineering courses may be approved by the CBE Department. |
Physical and Biological Sciences Electives List
Code | Title | Units |
---|---|---|
ANTHRO 1 | Introduction to Biological Anthropology | 4 |
ANTHRO C100 | Human Paleontology | 5 |
ANTHRO C103 | Introduction to Human Osteology | 6 |
ANTHRO 107 | Evolution of the Human Brain | 4 |
ANTHRO 134 | Analysis of the Archaeological Record | 4 |
ANTHRO 135 | Paleoethnobotany: Archaeological Methods and Laboratory Techniques | 4 |
ASTRON 3 | Introduction to Modern Cosmology | 2 |
ASTRON 7A | Introduction to Astrophysics | 4 |
ASTRON 7B | Introduction to Astrophysics | 4 |
ASTRON 10 | Introduction to General Astronomy | 4 |
ASTRON C10 | Introduction to General Astronomy | 4 |
ASTRON C12 | The Planets | 3 |
ASTRON C162 | Planetary Astrophysics | 4 |
BIOLOGY 1B | General Biology Lecture and Laboratory | 4 |
CHEM 12B | Organic Chemistry | 5 |
CHEM 103 | Inorganic Chemistry in Living Systems | 3 |
CHEM 104A | Advanced Inorganic Chemistry | 3 |
CHEM 104B | Advanced Inorganic Chemistry | 3 |
CHEM 105 | Instrumental Methods in Analytical Chemistry | 4 |
CHEM 108 | Inorganic Synthesis and Reactions | 4 |
CHEM 113 | Advanced Mechanistic Organic Chemistry | 3 |
CHEM 114 | Advanced Synthetic Organic Chemistry | 3 |
CHEM 115 | Organic Chemistry--Advanced Laboratory Methods | 4 |
CHEM 120B | Physical Chemistry | 3 |
CHEM 122 | Quantum Mechanics and Spectroscopy | 3 |
CHEM 125 | Physical Chemistry Laboratory | 3 |
CHEM C130 | Biophysical Chemistry: Physical Principles and the Molecules of Life | 4 |
CHEM 135 | Chemical Biology | 3 |
CHEM 143 | Nuclear Chemistry | 2 |
CHEM 146 | Radiochemical Methods in Nuclear Technology and Forensics | 3 |
CHEM C150 | Introduction to Materials Chemistry | 3 |
CHEM C182 | Atmospheric Chemistry and Physics Laboratory | 3 |
CHEM C191 | Quantum Information Science and Technology | 3 |
CHEM 192 | Individual Study for Advanced Undergraduates | 1-3 |
CHEM H194 | Research for Advanced Undergraduates | 2-4 |
CHEM 196 | Special Laboratory Study | 2-4 |
CIV ENG C106 | Air Pollution | 3 |
CIV ENG C116 | Chemistry of Soils | 3 |
COG SCI C102 | Scientific Approaches to Consciousness | 3 |
COG SCI C126 | Perception | 3 |
COG SCI C127 | Cognitive Neuroscience | 3 |
EPS 3 | The Water Planet | 3 |
EPS C12 | The Planets | 3 |
EPS 20 | Earthquakes in Your Backyard | 3 |
EPS C20 | Earthquakes in Your Backyard | 3 |
EPS 50 | The Planet Earth | 4 |
EPS 80 | Environmental Earth Sciences | 3 |
EPS C82 | Oceans | 3 |
EPS 100A | Minerals: Their Constitution and Origin | 4 |
EPS 103 | Introduction to Aquatic and Marine Geochemistry | 4 |
EPS 108 | Geodynamics | 4 |
EPS 117 | Geomorphology | 4 |
EPS C129 | Biometeorology | 3 |
EPS 130 | Strong Motion Seismology | 3 |
EPS C146 | Geological Oceanography | 4 |
EPS C162 | Planetary Astrophysics | 4 |
EPS C180 | Air Pollution | 3 |
EPS C181 | Atmospheric Physics and Dynamics | 3 |
EPS C182 | Atmospheric Chemistry and Physics Laboratory | 3 |
ENGLISH C77 | Introduction to Environmental Studies | 4 |
ESPM 2 | The Biosphere | 3 |
ESPM 15 | Introduction to Environmental Sciences | 3 |
ESPM C10 | Environmental Issues | 4 |
ESPM C11 | Americans and the Global Forest | 4 |
ESPM C12 | Introduction to Environmental Studies | 4 |
ESPM 40 | Insects and Human Society | 3 |
ESPM 42 | Natural History of Insects | 3 |
ESPM 44 | Biological Control | 2 |
ESPM 100 | Environmental Problem Solving | 4 |
ESPM 102A | Terrestrial Resource Ecology | 4 |
ESPM 102B | Natural Resource Sampling | 2 |
ESPM 102C | Resource Management | 4 |
ESPM C103 | Principles of Conservation Biology | 4 |
ESPM 106 | American Wildlife: Management and Policy in the 21st Century | 3 |
ESPM C107 | Biology and Geomorphology of Tropical Islands | 13 |
ESPM 108A | Trees: Taxonomy, Growth, and Structures | 3 |
ESPM 108B | Environmental Change Genetics | 3 |
ESPM 110 | Primate Ecology | 4 |
ESPM 112 | Microbial Ecology | 3 |
ESPM 113 | Insect Ecology | 3 |
ESPM 114 | Wildlife Ecology | 3 |
ESPM 115B | Biology of Aquatic Insects | 2 |
ESPM 117 | Urban Garden Ecosystems | 4 |
ESPM 118 | Agricultural Ecology | 4 |
ESPM 119 | Chemical Ecology | 2 |
ESPM 120 | Soil Characteristics | 3 |
ESPM C128 | Chemistry of Soils | 3 |
ESPM C129 | Biometeorology | 3 |
ESPM C130 | Terrestrial Hydrology | 4 |
ESPM 131 | Soil Microbial Ecology | 3 |
ESPM 134 | Fire, Insects, and Diseases in Forest Ecosystems | 3 |
ESPM 137 | Landscape Ecology | 3 |
ESPM C138 | Introduction to Comparative Virology | 4 |
ESPM 140 | General Entomology | 4 |
ESPM 142 | Insect Behavior | 3 |
ESPM 144 | Insect Physiology | 3 |
ESPM C148 | Pesticide Chemistry and Toxicology | 3 |
ESPM C149 | Molecular Ecology | 4 |
ESPM 152 | Global Change Biology | 3 |
ESPM 172 | Photogrammetry and Remote Sensing | 3 |
ESPM 174 | Design and Analysis of Ecological Research | 4 |
ESPM C180 | Air Pollution | 3 |
ESPM 185 | Applied Forest Ecology | 4 |
ESPM 186 | Management and Conservation of Rangeland Ecosystems | 4 |
ESPM 187 | Restoration Ecology | 4 |
ENV SCI 10 | Introduction to Environmental Sciences | 3 |
ENV SCI 125 | Environments of the San Francisco Bay Area | 3 |
GEOG 1 | Course Not Available | |
GEOG 35 | Global Ecology and Development | 4 |
GEOG 40 | Introduction to Earth System Science | 4 |
GEOG C82 | Course Not Available | |
GEOG C136 | Terrestrial Hydrology | 4 |
GEOG 137 | Top Ten Global Environmental Problems | 4 |
GEOG 140A | Physical Landscapes: Process and Form | 4 |
GEOG 143 | Global Change Biogeochemistry | 3 |
GEOG 144 | Principles of Meteorology | 3 |
GEOG C145 | Geological Oceanography | 4 |
GEOG 148 | Course Not Available | |
GEOG 171 | Special Topics in Physical Geography | 3 |
INTEGBI 31 | The Ecology and Evolution of Animal Behavior | 3 |
INTEGBI 41 | Marine Mammals | 2 |
INTEGBI C82 | Oceans | 3 |
INTEGBI 102LF | Introduction to California Plant Life with Laboratory | 4 |
INTEGBI 103LF | Invertebrate Zoology with Laboratory | 5 |
INTEGBI 104LF | Natural History of the Vertebrates with Laboratory | 5 |
INTEGBI 106A | Physical and Chemical Environment of the Ocean | 4 |
INTEGBI C107L | Principles of Plant Morphology with Laboratory | 4 |
INTEGBI 115 | Introduction to Systems in Biology and Medicine | 4 |
INTEGBI 117 | Medical Ethnobotany | 2 |
INTEGBI 118 | Host-Microbe Interactions | 4 |
INTEGBI 123AL | Exercise and Environmental Physiology with Laboratory | 5 |
INTEGBI 131 | General Human Anatomy | 3 |
INTEGBI 135 | The Mechanics of Organisms | 4 |
INTEGBI 137 | Human Endocrinology | 4 |
INTEGBI C142L | Introduction to Human Osteology | 6 |
INTEGBI C143A | Biological Clocks: Physiology and Behavior | 3 |
INTEGBI C143B | Hormones and Behavior | 3 |
INTEGBI 148 | Comparative Animal Physiology | 3 |
INTEGBI C149 | Molecular Ecology | 4 |
INTEGBI 151 | Plant Physiological Ecology | 4 |
INTEGBI 152 | Environmental Toxicology | 4 |
INTEGBI 153 | Ecology | 3 |
INTEGBI 154 | Plant Ecology | 3 |
INTEGBI 154L | Plant Ecology Laboratory | 2 |
INTEGBI C156 | Principles of Conservation Biology | 4 |
INTEGBI 158LF | Biology and Geomorphology of Tropical Islands | 13 |
INTEGBI 159 | The Living Planet: Impact of the Biosphere on the Earth System | 3 |
INTEGBI 161 | Population and Evolutionary Genetics | 4 |
INTEGBI 162 | Ecological Genetics | 4 |
INTEGBI 164 | Human Genetics and Genomics | 4 |
INTEGBI 168 | Systematics of Vascular Plants | 2 |
INTEGBI 168L | Systematics of Vascular Plants with Laboratory | 4 |
INTEGBI 169 | Evolutionary Medicine | 4 |
INTEGBI 174LF | Ornithology with Laboratory | 4 |
INTEGBI 183L | Evolution of the Vertebrates with Laboratory | 4 |
INTEGBI 184L | Morphology of the Vertebrate Skeleton with Laboratory | 4 |
INTEGBI C185L | Human Paleontology | 5 |
INTEGBI C187 | Human Biogeography of the Pacific | 3 |
L & S C30U | Americans and the Global Forest | 4 |
L & S C30V | Environmental Issues | 4 |
L & S C70T | The Planets | 3 |
L & S C70U | Introduction to General Astronomy | 4 |
L & S C70W | Physics and Music | 3 |
L & S C70Y | Earthquakes in Your Backyard | 3 |
MAT SCI C150 | Introduction to Materials Chemistry | 3 |
MCELLBI 32 | Introduction to Human Physiology | 3 |
MCELLBI 41 | Genetics and Society | 3 |
MCELLBI 50 | The Immune System and Disease | 4 |
MCELLBI C61 | Brain, Mind, and Behavior | 3 |
MCELLBI C62 | Drugs and the Brain | 3 |
MCELLBI C100A | Biophysical Chemistry: Physical Principles and the Molecules of Life | 4 |
MCELLBI 100B | Biochemistry: Pathways, Mechanisms, and Regulation | 4 |
MCELLBI 102 | Survey of the Principles of Biochemistry and Molecular Biology | 4 |
MCELLBI C103 | Bacterial Pathogenesis | 3 |
MCELLBI 104 | Genetics, Genomics, and Cell Biology | 4 |
MCELLBI C112 | General Microbiology | 4 |
MCELLBI C114 | Introduction to Comparative Virology | 4 |
MCELLBI C116 | Microbial Diversity | 3 |
MCELLBI 132 | Biology of Human Cancer | 4 |
MCELLBI 133L | Physiology and Cell Biology Laboratory | 4 |
MCELLBI 135A | Topics in Cell and Developmental Biology: Molecular Endocrinology | 3 |
MCELLBI 136 | Physiology | 4 |
MCELLBI 140 | General Genetics | 4 |
MCELLBI 140L | Genetics Laboratory | 4 |
MCELLBI 141 | Developmental Biology | 4 |
MCELLBI 143 | Evolution of Genomes, Cells, and Development | 3 |
MCELLBI C148 | Microbial Genomics and Genetics | 4 |
MCELLBI 150 | Molecular Immunology | 4 |
MCELLBI 160L | Neurobiology Laboratory | 4 |
MCELLBI 166 | Biophysical Neurobiology | 3 |
NUSCTX 10 | Introduction to Human Nutrition | 3 |
NUSCTX 11 | Introduction to Toxicology | 3 |
NUSCTX 108A | Introduction and Application of Food Science | 3 |
NUSCTX 110 | Toxicology | 4 |
NUSCTX 160 | Metabolic Bases of Human Health and Diseases | 4 |
NUSCTX 171 | Nutrition and Toxicology Laboratory | 4 |
PHYSICS 7C | Physics for Scientists and Engineers | 4 |
PHYSICS C21 | Physics and Music | 3 |
PHYSICS 105 | Analytic Mechanics | 4 |
PHYSICS 110A | Electromagnetism and Optics | 4 |
PHYSICS 110B | Electromagnetism and Optics | 4 |
PHYSICS 112 | Introduction to Statistical and Thermal Physics | 4 |
PHYSICS 129 | Particle Physics | 4 |
PHYSICS 130 | Quantum and Nonlinear Optics | 3 |
PHYSICS 137B | Quantum Mechanics | 4 |
PHYSICS 138 | Modern Atomic Physics | 3 |
PHYSICS 141A | Solid State Physics | 4 |
PHYSICS 177 | Principles of Molecular Biophysics | 3 |
PLANTBI 10 | Plants, Agriculture, and Society | 2 |
PLANTBI 40 | The (Secret) Life of Plants | 3 |
PLANTBI C103 | Bacterial Pathogenesis | 3 |
PLANTBI C107L | Principles of Plant Morphology with Laboratory | 4 |
PLANTBI C112 | General Microbiology | 4 |
PLANTBI C114 | Introduction to Comparative Virology | 4 |
PLANTBI C116 | Microbial Diversity | 3 |
PLANTBI 120 | Biology of Algae | 2 |
PLANTBI 120L | Laboratory for Biology of Algae | 2 |
PLANTBI 122 | Bioenergy | 2 |
PLANTBI 135 | Physiology and Biochemistry of Plants | 3 |
PLANTBI C148 | Microbial Genomics and Genetics | 4 |
PLANTBI 150 | Plant Cell Biology | 3 |
PLANTBI 160 | Plant Molecular Genetics | 3 |
PLANTBI 170 | Modern Applications of Plant Biotechnology | 2 |
PLANTBI 180 | Environmental Plant Biology | 2 |
PSYCH 110 | Introduction to Biological Psychology | 3 |
PSYCH C113 | Biological Clocks: Physiology and Behavior | 3 |
PSYCH 114 | Biology of Learning | 3 |
PSYCH C116 | Hormones and Behavior | 3 |
PSYCH 117 | Human Neuropsychology | 3 |
PSYCH 122 | Introduction to Human Learning and Memory | 3 |
PSYCH C126 | Perception | 3 |
PSYCH C127 | Cognitive Neuroscience | 3 |
PSYCH C129 | Scientific Approaches to Consciousness | 3 |
PB HLTH C102 | Bacterial Pathogenesis | 3 |
PB HLTH 162A | Public Health Microbiology | 3 |
Lower Division Engineering Electives List
Code | Title | Units |
---|---|---|
CHM ENG 90 | Science and Engineering of Sustainable Energy | 3 |
COMPSCI 61B | Data Structures | 4 |
EL ENG 16A | Designing Information Devices and Systems I | 4 |
EL ENG 16B | Designing Information Devices and Systems II | 4 |
Upper Division Engineering Electives List
Code | Title | Units |
---|---|---|
BIO ENG 101 | Instrumentation in Biology and Medicine | 4 |
BIO ENG 102 | Biomechanics: Analysis and Design | 4 |
BIO ENG 103 | Engineering Molecules 2 | 4 |
BIO ENG 104 | Biological Transport Phenomena | 4 |
BIO ENG 110 | Biomedical Physiology for Engineers | 4 |
BIO ENG 111 | Functional Biomaterials Development and Characterization | 4 |
BIO ENG 113 | Stem Cells and Technologies | 4 |
BIO ENG C112 | Molecular Biomechanics and Mechanobiology of the Cell | 4 |
BIO ENG 114 | Cell Engineering | 4 |
BIO ENG 115 | Cell Biology for Engineers | 4 |
BIO ENG 116 | Cell and Tissue Engineering | 4 |
BIO ENG C117 | Structural Aspects of Biomaterials | 4 |
BIO ENG C118 | Biological Performance of Materials | 4 |
BIO ENG C119 | Orthopedic Biomechanics | 4 |
BIO ENG 121 | BioMEMS and Medical Devices | 4 |
BIO ENG 121L | BioMems and BioNanotechnology Laboratory | 4 |
BIO ENG 124 | Basic Principles of Drug Delivery | 3 |
BIO ENG C125 | Introduction to Robotics | 4 |
BIO ENG 131 | Introduction to Computational Molecular and Cell Biology | 4 |
BIO ENG 132 | Genetic Devices | 4 |
BIO ENG 135 | Frontiers in Microbial Systems Biology | 4 |
BIO ENG C136L | Laboratory in the Mechanics of Organisms | 3 |
BIO ENG 140L | Synthetic Biology Laboratory | 4 |
BIO ENG 143 | Computational Methods in Biology | 4 |
BIO ENG C145L | Introductory Electronic Transducers Laboratory | 3 |
BIO ENG C145M | Introductory Microcomputer Interfacing Laboratory | 3 |
BIO ENG 147 | Principles of Synthetic Biology | 4 |
BIO ENG 148 | Bioenergy and Sustainable Chemical Synthesis: Metabolic Engineering and Synthetic Biology Approaches | 3 |
BIO ENG 150 | Introduction of Bionanoscience and Bionanotechnology | 4 |
BIO ENG 151 | Micro/Nanofluidics for Bioengineering and Lab-On-A-Chip | 4 |
BIO ENG 163 | Principles of Molecular and Cellular Biophotonics | 4 |
BIO ENG 163L | Molecular and Cellular Biophotonics Laboratory | 4 |
BIO ENG 164 | Optics and Microscopy | 4 |
BIO ENG C165 | Medical Imaging Signals and Systems | 4 |
BIO ENG 168L | Practical Light Microscopy | 3 |
BIO ENG C181 | The Berkeley Lectures on Energy: Energy from Biomass | 3 |
CHM ENG 143 | Computational Methods in Chemical Engineering | 4 |
CHM ENG 170A | Biochemical Engineering | 3 |
CHM ENG 170B | Biochemical Engineering | 3 |
CHM ENG C170L | Biochemical Engineering Laboratory | 3 |
CHM ENG 171 | Transport Phenomena | 3 |
CHM ENG 176 | Principles of Electrochemical Processes | 3 |
CHM ENG C178 | Polymer Science and Technology | 3 |
CHM ENG 179 | Process Technology of Solid-State Materials Devices | 3 |
CHM ENG 180 | Chemical Engineering Economics | 3 |
CHM ENG H194 | Research for Advanced Undergraduates | 2-4 |
CHM ENG C195A | The Berkeley Lectures on Energy: Energy from Biomass (may be repeated for credit when the topic changes) | 3 |
CHM ENG 196 | Special Laboratory Study | 2-4 |
CHEM C138 | The Berkeley Lectures on Energy: Energy from Biomass | 3 |
CIV ENG 101 | Fluid Mechanics of Rivers, Streams, and Wetlands | 3 |
CIV ENG 103 | Introduction to Hydrology | 3 |
CIV ENG 105 | Environmental Fluid Mechanics and Hydrology | 3 |
CIV ENG C106 | Air Pollution | 3 |
CIV ENG 107 | Climate Change Mitigation | 3 |
CIV ENG 110 | Water Systems of the Future | 3 |
CIV ENG 111 | Environmental Engineering | 3 |
CIV ENG 111L | Water and Air Quality Laboratory | 1 |
CIV ENG 112 | Environmental Engineering Design | 3 |
CIV ENG 114 | Environmental Microbiology | 3 |
CIV ENG 115 | Water Chemistry | 3 |
CIV ENG C116 | Chemistry of Soils | 3 |
CIV ENG 120 | Structural Engineering | 3 |
CIV ENG 121 | Structural Analysis | 3 |
CIV ENG 122L | Structural Steel Design Project | 1 |
CIV ENG 122N | Design of Steel Structures | 3 |
CIV ENG 123L | Structural Concrete Design Project | 1 |
CIV ENG 123N | Design of Reinforced Concrete Structures | 3 |
CIV ENG 124 | Structural Design in Timber | 3 |
CIV ENG 130N | Mechanics of Structures | 3 |
CIV ENG C133 | Engineering Analysis Using the Finite Element Method | 3 |
CIV ENG 153 | Transportation Facility Design | 3 |
CIV ENG 155 | Transportation Systems Engineering | 3 |
CIV ENG 156 | Infrastructure Planning and Management | 3 |
CIV ENG 167 | Engineering Project Management | 3 |
CIV ENG 171 | Rock Mechanics | 3 |
CIV ENG 173 | Groundwater and Seepage | 3 |
CIV ENG 175 | Geotechnical and Geoenvironmental Engineering | 3 |
CIV ENG 176 | Environmental Geotechnics | 3 |
CIV ENG C178 | Applied Geophysics | 3 |
CIV ENG 180 | Life-Cycle Design and Construction | 4 |
CIV ENG 186 | Design of Cyber-Physical Systems | 3 |
CIV ENG 191 | Civil and Environmental Engineering Systems Analysis | 3 |
CIV ENG 193 | Engineering Risk Analysis | 3 |
COMPSCI C149 | Course Not Available | |
COMPSCI 161 | Computer Security | 4 |
COMPSCI 162 | Operating Systems and System Programming | 4 |
EL ENG 105 | Microelectronic Devices and Circuits | 4 |
EL ENG C106A | Introduction to Robotics | 4 |
EL ENG C106B | Robotic Manipulation and Interaction | 4 |
EL ENG 113 | Power Electronics | 4 |
EL ENG 118 | Introduction to Optical Engineering | 3 |
EL ENG 137A | Introduction to Electric Power Systems | 4 |
EL ENG 137B | Introduction to Electric Power Systems | 4 |
EL ENG 130 | Integrated-Circuit Devices | 4 |
EL ENG 134 | Fundamentals of Photovoltaic Devices | 4 |
EL ENG 140 | Linear Integrated Circuits | 4 |
EL ENG 142 | Integrated Circuits for Communications | 4 |
EL ENG 143 | Microfabrication Technology | 4 |
EL ENG C145B | Medical Imaging Signals and Systems | 4 |
EL ENG C145L | Introductory Electronic Transducers Laboratory | 3 |
EL ENG C145O | Laboratory in the Mechanics of Organisms | 3 |
EL ENG 147 | Introduction to Microelectromechanical Systems (MEMS) | 3 |
EL ENG C149 | Course Not Available | |
ENGIN 117 | Methods of Engineering Analysis | 3 |
ENGIN 120 | Principles of Engineering Economics | 3 |
IND ENG 160 | Nonlinear and Discrete Optimization | 3 |
IND ENG 153 | Logistics Network Design and Supply Chain Management | 3 |
IND ENG 162 | Linear Programming and Network Flows | 3 |
IND ENG 166 | Decision Analytics | 3 |
IND ENG 170 | Industrial Design and Human Factors | 3 |
MAT SCI 112 | Corrosion (Chemical Properties) | 3 |
MAT SCI 102 | Bonding, Crystallography, and Crystal Defects | 3 |
MAT SCI 104 | Materials Characterization | 4 |
MAT SCI 111 | Properties of Electronic Materials | 4 |
MAT SCI 113 | Mechanical Behavior of Engineering Materials | 3 |
MAT SCI 117 | Properties of Dielectric and Magnetic Materials | 3 |
MAT SCI C118 | Biological Performance of Materials | 4 |
MAT SCI 120 | Materials Production | 3 |
MAT SCI 121 | Metals Processing | 3 |
MAT SCI 122 | Ceramic Processing | 3 |
MAT SCI 123 | ELECTRONIC MATERIALS PROCESSING | 4 |
MAT SCI 125 | Thin-Film Materials Science | 3 |
MAT SCI 136 | Materials in Energy Technologies | 4 |
MAT SCI 140 | Nanomaterials for Scientists and Engineers | 3 |
MAT SCI 151 | Polymeric Materials | 3 |
MEC ENG 102A | Introduction to Mechanical Systems for Mechatronics | 4 |
MEC ENG 102B | Mechatronics Design | 4 |
MEC ENG 104 | Engineering Mechanics II | 3 |
MEC ENG 106 | Fluid Mechanics | 3 |
MEC ENG 107 | Mechanical Engineering Laboratory | 3 |
MEC ENG 108 | Mechanical Behavior of Engineering Materials | 4 |
MEC ENG 109 | Heat Transfer | 3 |
MEC ENG 110 | Introduction to Product Development | 3 |
MEC ENG C115 | Molecular Biomechanics and Mechanobiology of the Cell | 4 |
MEC ENG C117 | Structural Aspects of Biomaterials | 4 |
MEC ENG 119 | Introduction to MEMS (Microelectromechanical Systems) | 3 |
MEC ENG 122 | Processing of Materials in Manufacturing | 3 |
MEC ENG 130 | Design of Planar Machinery | 3 |
MEC ENG 131 | Vehicle Dynamics and Control | 3 |
MEC ENG 133 | Mechanical Vibrations | 3 |
MEC ENG 135 | Design of Microprocessor-Based Mechanical Systems | 4 |
MEC ENG 138 | Introduction to Micro/Nano Mechanical Systems Laboratory | 3 |
MEC ENG 140 | Combustion Processes | 3 |
MEC ENG 146 | Energy Conversion Principles | 3 |
MEC ENG 150A | Solar-Powered Vehicles: Analysis, Design and Fabrication | 3 |
MEC ENG 151 | Advanced Heat Transfer | 3 |
MEC ENG 163 | Engineering Aerodynamics | 3 |
MEC ENG 164 | Marine Statics and Structures | 3 |
MEC ENG 165 | Ocean-Environment Mechanics | 3 |
MEC ENG 167 | Microscale Fluid Mechanics | 3 |
MEC ENG 170 | Engineering Mechanics III | 3 |
MEC ENG 173 | Fundamentals of Acoustics | 3 |
MEC ENG 175 | Intermediate Dynamics | 3 |
MEC ENG C176 | Orthopedic Biomechanics | 4 |
MEC ENG C180 | Engineering Analysis Using the Finite Element Method | 3 |
MEC ENG 185 | Introduction to Continuum Mechanics | 3 |
NUC ENG 100 | Introduction to Nuclear Engineering | 3 |
NUC ENG 101 | Nuclear Reactions and Radiation | 4 |
NUC ENG 102 | Nuclear Reactions and Radiation Laboratory | 3 |
NUC ENG 120 | Nuclear Materials | 4 |
NUC ENG 130 | Analytical Methods for Non-proliferation | 4 |
NUC ENG 124 | Radioactive Waste Management | 3 |
NUC ENG 150 | Introduction to Nuclear Reactor Theory | 4 |
NUC ENG 155 | Introduction to Numerical Simulations in Radiation Transport | 3 |
NUC ENG 161 | Nuclear Power Engineering | 4 |
NUC ENG 162 | Radiation Biophysics and Dosimetry | 3 |
NUC ENG 167 | Risk-Informed Design for Advanced Nuclear Systems | 3 |
NUC ENG 175 | Methods of Risk Analysis | 3 |
NUC ENG 180 | Introduction to Controlled Fusion | 3 |
PLANTBI C124 | The Berkeley Lectures on Energy: Energy from Biomass | 3 |
Concentrations
The concentrations are biotechnology, chemical processing, environmental technology, materials science and technology, and applied physical science. Students who plan to declare a concentration must do so no later than the end of their junior year. Double concentrations are not permitted.
Biotechnology
Code | Title | Units |
---|---|---|
CHEM 12B | Organic Chemistry | 5 |
or MCELLBI C112 | General Microbiology | |
or MCELLBI 104 | Genetics, Genomics, and Cell Biology | |
CHM ENG 170A | Biochemical Engineering | 3 |
Choose two from the following, such that at least 3 units come from an engineering course (CHM ENG or BIO ENG) | ||
Biochemical Engineering | ||
Biochemical Engineering Laboratory | ||
Protein Engineering | ||
Biomolecular Engineering | ||
Functional Biomaterials Development and Characterization | ||
Cell and Tissue Engineering | ||
Introduction to Protein Informatics and Protein Informatics Laboratory (Students must sign up for Bio Eng 144L (3) if taking 144) | ||
Bioenergy and Sustainable Chemical Synthesis: Metabolic Engineering and Synthetic Biology Approaches | ||
Fluid Mechanics of Biological Systems | ||
Cell and Systems Biology | ||
Molecular Immunology | ||
Research for Advanced Undergraduates (Use of CHM ENG H194 or 196 toward the concentration for undergraduate research in a biotechnology research laboratory will be considered. Requires approval from the faculty. Send requests for approval to the Director of Undergraduate Education. ) | ||
Special Laboratory Study (Use of CHM ENG H194 or 196 toward the concentration for undergraduate research in a biotechnology research laboratory will be considered. Requires approval from the faculty. Send requests for approval to the Director of Undergraduate Education. ) | ||
Students in the Biotechnology concentration are required to take MCELLBI 102 or CHEM 135 in place of BIOLOGY 1A |
Chemical Processing
Code | Title | Units |
---|---|---|
CHEM 104A | Advanced Inorganic Chemistry | 3-5 |
or CHEM 12B | Organic Chemistry | |
Select 6 units from the following: | ||
Biochemical Engineering | ||
Biochemical Engineering | ||
Biochemical Engineering Laboratory | ||
Transport Phenomena | ||
CHM ENG 176 | Principles of Electrochemical Processes | 3 |
Polymer Science and Technology | ||
Process Technology of Solid-State Materials Devices | ||
Chemical Engineering Economics | ||
Research for Advanced Undergraduates (up to 3 units) | ||
Select 3 units from the following: | ||
Introduction to Solid Mechanics | ||
Environmental Engineering | ||
Environmental Microbiology | ||
Groundwater and Seepage | ||
Properties of Electronic Materials | ||
Corrosion (Chemical Properties) | ||
Mechanical Behavior of Engineering Materials | ||
Biological Performance of Materials | ||
Materials Production | ||
Metals Processing | ||
Ceramic Processing | ||
ELECTRONIC MATERIALS PROCESSING | ||
Combustion Processes | ||
Advanced Heat Transfer |
Energy and Environment
Code | Title | Units |
---|---|---|
Select at least 3 units from the following: | ||
Organic Chemistry | ||
Advanced Inorganic Chemistry | ||
Nuclear Chemistry | ||
Physics for Scientists and Engineers | ||
Select 9 units from the following: | ||
Biochemical Engineering | ||
Principles of Electrochemical Processes | ||
Polymer Science and Technology | ||
Process Technology of Solid-State Materials Devices | ||
The Berkeley Lectures on Energy: Energy from Biomass | ||
Or other approved CHM ENG 195 courses with energy or environment topics as the main focus, including Carbon Capture and Sequestration | ||
Nuclear Reactions and Radiation | ||
Introduction to Nuclear Reactor Theory | ||
Nuclear Power Engineering | ||
Climate Change Mitigation | ||
Environmental Engineering | ||
Chemistry of Soils | ||
Groundwater and Seepage | ||
Combustion Processes | ||
Energy Conversion Principles |
Materials Science and Technology
Code | Title | Units |
---|---|---|
Select one of the following: | ||
Advanced Inorganic Chemistry | ||
Inorganic Synthesis and Reactions | ||
Organic Chemistry | ||
Select 3 units from the following: | ||
Principles of Electrochemical Processes | ||
Polymer Science and Technology | ||
Process Technology of Solid-State Materials Devices | ||
Select 6 units from the following: | ||
Introduction to Solid Mechanics | ||
Integrated-Circuit Devices | ||
Microfabrication Technology | ||
Bonding, Crystallography, and Crystal Defects | ||
Phase Transformations and Kinetics | ||
Properties of Electronic Materials | ||
Corrosion (Chemical Properties) | ||
Materials Production | ||
Metals Processing | ||
Ceramic Processing | ||
ELECTRONIC MATERIALS PROCESSING | ||
Thin-Film Materials Science | ||
Processing of Materials in Manufacturing 1 |
1 | Students may take MEC ENG 122 without the prerequisites of CIV ENG 130N and MEC ENG 108. |
Business and Management
Code | Title | Units |
---|---|---|
CHM ENG 180 | Chemical Engineering Economics | 3 |
3 units of science electives selected from the list of physical and biological science electives | 3 | |
3 units of engineering electives selected from the list of engineering electives | 3 | |
3 units chosen from the following: | ||
Introduction to Financial Accounting | ||
Entrepreneurship: How to Successfully start a New Business | ||
Principles of Business | ||
Fundamentals of Business | ||
Upper division preferred. |
Applied Physical Science
Code | Title | Units |
---|---|---|
6 units of chemistry or physics courses selected from the list of Physical and Biological Sciences List | 6 | |
3 units of CHM ENG electives (excluding CHM ENG 196) | 3 | |
3 units chosen from engineering electives list | 3 |
Minor Requirements
Students who have a strong interest in an area of study outside their major often decide to complete a minor program. These programs have set requirements and are noted officially on the transcript in the memoranda section but are not noted on diplomas.
General Guidelines
- All courses taken to fulfill the minor requirements below must be taken for graded credit.
- A minimum of three of the upper division courses taken to fulfill the minor requirements must be completed at UC Berkeley.
- A minimum grade point average (GPA) of 2.0 is required for courses used to fulfill the minor requirements.
- Students must consult with their college/school for information regarding overlap of courses between their majors and minors.
Requirements
Code | Title | Units |
---|---|---|
Upper Division | ||
CHM ENG 140 | Introduction to Chemical Process Analysis | 4 |
CHM ENG 141 | Chemical Engineering Thermodynamics 1 | 4 |
CHM ENG 150A | Transport Processes 1 | 4 |
Select two of the following: | ||
CHM ENG 142 | Chemical Kinetics and Reaction Engineering | 4 |
CHM ENG 143 | Computational Methods in Chemical Engineering | 4 |
CHM ENG 150B | Transport and Separation Processes | 4 |
CHM ENG 162 | Dynamics and Control of Chemical Processes | 4 |
CHM ENG 170A | Biochemical Engineering | 3 |
CHM ENG 170B | Biochemical Engineering | 3 |
CHM ENG 171 | Transport Phenomena | 3 |
CHM ENG 176 | Principles of Electrochemical Processes | 3 |
CHM ENG C178 | Polymer Science and Technology | 3 |
CHM ENG 179 | Process Technology of Solid-State Materials Devices | 3 |
CHM ENG 180 | Chemical Engineering Economics | 3 |
CHM ENG C195A | The Berkeley Lectures on Energy: Energy from Biomass | 3 |
1 | Students who have completed courses in other departments at Berkeley that are essentially equivalent to CHM ENG 141 and CHM ENG 150A can substitute other courses from the above list. |
College Requirements
Undergraduate students in the College of Chemistry must fulfill the following requirements in addition to those required by the major program.
For detailed lists of courses that fulfill college requirements, please see the College of Chemistry page in this Guide.
Entry Level Writing
All students who will enter the University of California as freshmen must demonstrate their command of the English language by fulfilling the Entry Level Writing Requirement. Fulfillment of this requirement is also a prerequisite to enrollment in all reading and composition courses at UC Berkeley.
American History and American Institutions
The American History and Institutions requirements are based on the principle that a US resident graduated from an American university should have an understanding of the history and governmental institutions of the United States.
American Cultures
American Cultures is the one requirement that all undergraduate students at Cal need to take and pass in order to graduate. The requirement offers an exciting intellectual environment centered on the study of race, ethnicity and culture of the United States. AC courses offer students opportunities to be part of research-led, highly accomplished teaching environments, grappling with the complexity of American Culture.
Foreign Language
Applies to Chemistry and Chemical Biology majors only.
The Foreign Language requirement may be satisfied with one foreign language, in one of the following ways:
-
By completing in high school the third year of one foreign language with minimum grades of C-.
-
By completing at Berkeley the second semester of a sequence of courses in one foreign language, or the equivalent at another institution. Only foreign language courses that include reading and composition as well as conversation are accepted in satisfaction of this requirement. Foreign language courses may be taken on a Pass/No Pass basis.
-
By demonstrating equivalent knowledge of a foreign language through examination, including a College Entrance Examination Board (CEEB) Advanced Placement Examination with a score of 3 or higher (if taken before admission to college), an SAT II: Subject Test with a score of 590 or higher, or a proficiency examination offered by some departments at Berkeley or at another campus of the University of California.
Reading and Composition
In order to provide a solid foundation in reading, writing and critical thinking the College requires lower division work in composition.
-
Chemical Engineering majors – A-level R&C course (e.g., English R1A) by end of freshman year
-
Chemical Biology and Chemistry majors – A- and B-level courses by end of sophomore year
Humanities and Social Sciences Breadth Requirement – Chemistry & Chemical Biology majors
-
15 units total; includes Reading & Composition (R1A + R1B) and American Cultures courses
-
Remaining units must come from the College of Chemistry’s lists of approved humanities and social science courses
-
Breadth courses may be taken on a Pass/No Pass basis (excluding R&C)
- AP, IB, and GCE A-level exam credit may be used to satisfy the breadth requirement
Humanities and Social Sciences Breadth Requirement – Chemical Engineering major
-
22 units total; includes Reading & Composition (R1A only) and American Cultures courses
-
Breadth Series requirement: As part of the 22 units, students must complete two courses, at least one being upper division, in the same or very closely allied humanities or social science department(s). AP credit may be used to satisfy the lower division aspect of the requirement.
-
Breadth Series courses and all remaining units must come from the College of Chemistry’s lists of approved humanities and social science courses
-
Breadth courses may be taken on a Pass/No Pass basis (excluding R&C)
-
AP, IB, and GCE A-level exam credit may be used to satisfy the breadth requirement
Class Schedule Requirements
Minimum units per semester – 13
Maximum units per semester – 19.5
12 units of course work each semester must satisfy degree requirements.
Chemical engineering freshmen and Chemistry majors are required to enroll in a minimum of one chemistry course each semester.
After the freshman year, Chemical Engineering majors must enroll in a minimum of one chemical and biomolecular engineering course each semester.
Semester Limit
-
Students who entered as freshmen – 8 semesters
-
Chemistry & Chemical Biology majors who entered as transfer students – 4 semesters
- Chemical Engineering and Joint majors who entered as transfer students – 5 semesters
Summer sessions are excluded when determining the limit on semesters. Students who wish to delay graduation to complete a minor, a double major, or simultaneous degrees must request approval for delay of graduation before what would normally be their final two semesters. The College of Chemistry does not have a rule regarding maximum units that a student can accumulate.
Senior Residence
After 90 units toward the bachelor’s degree have been completed, at least 24 of the remaining units must be completed in residence in the College of Chemistry, in at least two semesters (the semester in which the 90 units are exceeded, plus at least one additional semester).
To count as a semester of residence for this requirement, a program must include at least 4 units of successfully completed courses. A summer session can be credited as a semester in residence if this minimum unit requirement is satisfied.
Juniors and seniors who participate in the UC Education Abroad Program (EAP) for a full year may meet a modified senior residence requirement. After 60 units toward the bachelor’s degree have been completed, at least 24 (excluding EAP) of the remaining units must be completed in residence in the College of Chemistry, in at least two semesters. At least 12 of the 24 units must be completed after the student has already completed 90 units. Undergraduate Dean’s approval for the modified senior residence requirement must be obtained before enrollment in the Education Abroad Program.
Minimum Total Units
A student must successfully complete at least 120 semester units in order to graduate.
Minimum Academic Requirements
Grades
A student must earn at least a C average (2.0 GPA) in all courses undertaken at UC, including those from UC Summer Sessions, UC Education Abroad Program, and UC Berkeley Washington Program, as well as XB courses from University Extension.
Minimum Course Grade Requirements
Students in the College of Chemistry who receive a grade of D+ or lower in a chemical and biomolecular engineering or chemistry course for which a grade of C- or higher is required must repeat the course at Berkeley.
Students in the College of Chemistry must achieve:
-
C- or higher in CHEM 4B before taking more advanced courses
-
GPA of at least 2.0 in all courses taken in the college in order to advance to and continue in the upper division
Chemistry or chemical biology majors must also achieve:
-
C- or higher in CHEM 120A and CHEM 120B if taken before CHEM 125 or CHEM C182
-
2.0 GPA in all upper division courses taken at the University to satisfy major requirements
Chemical engineering students must also achieve:
-
C- or higher in Chemical and Biomolecular Engineering (CBE) 140 before taking any other CBE courses
-
C- or higher in CHM ENG 150A to be eligible to take any other course in the 150 series
-
2.0 GPA in all upper division courses taken at the University to satisfy major requirements
Chemical engineering students who do not achieve a grade of C- or higher in CHM ENG 140 on their first attempt are advised to change to another major. If the course is not passed with a grade of C- or higher on the second attempt, continuation in the Chemical Engineering program is normally not allowed.
Minimum Progress
To make normal progress toward a degree, undergraduates must successfully complete 30 units of coursework each year. The continued enrollment of students who do not maintain normal progress will be subject to the approval of the Undergraduate Dean. To achieve minimum academic progress, the student must meet two criteria:
-
Completed no fewer units than 15 multiplied by the number of semesters, less one, in which the student has been enrolled at Berkeley. Summer sessions do not count as semesters for this purpose.
- A student’s class schedule must contain at least 13 units in any term, unless otherwise authorized by the staff adviser or the Undergraduate Dean.
Student Learning Goals
Mission
The mission of the Department of Chemical and Biomolecular Engineering is:
- To educate people for careers of leadership and innovation in chemical engineering and related fields.
- To expand the base of engineering knowledge through original research and by developing technology to serve the needs of society.
- To benefit the public through service to industry, government, and the engineering profession.
Fulfillment of this mission is achieved in part by the Department of Chemical and Biomolecular Engineering's accredited undergraduate degree program in chemical engineering. The undergraduate curriculum comprises both a technical curriculum and breadth requirements.
The goals of chemical engineering breadth requirements are to teach the arts of writing clearly and persuasively, to develop the skills to read carefully and evaluate evidence effectively, and to instill an awareness of humanity in historical and social contexts. The Berkeley American Cultures requirement affirms the value of diversity in acquiring knowledge.
The technical curriculum in chemical engineering seeks to provide students with a broad education emphasizing an excellent foundation in scientific and engineering fundamentals.
Learning Goals for the Major
- An ability to apply knowledge of mathematics, science, and engineering.
- An ability to design and conduct experiments, as well as to analyze and interpret data.
- An ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability.
- An ability to function on multidisciplinary teams.
- An ability to identify, formulate, and solve engineering problems.
- An understanding of professional and ethical responsibility.
- An ability to communicate effectively.
- The broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context.
- A recognition of the need for and an ability to engage in life-long learning.
- A knowledge of contemporary issues.
- An ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.
Courses
Chemical Engineering
CHM ENG 24 Freshman Seminars 1 Unit
Terms offered: Spring 2015, Fall 2014, Spring 2014
The Berkeley Seminar Program has been designed to provide new students with the opportunity to explore an intellectual topic with a faculty member in a small-seminar setting. Berkeley Seminars are offered in all campus departments, and topics vary from department to department and semester to semester.
Freshman Seminars: Read More [+]
Rules & Requirements
Repeat rules: Course may be repeated for credit when topic changes. Course may be repeated for credit when topic changes.
Hours & Format
Fall and/or spring: 15 weeks - 1 hour of seminar per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: The grading option will be decided by the instructor when the class is offered. Final exam required.
CHM ENG 40 Introduction to Chemical Engineering Design 2 Units
Terms offered: Fall 2018, Fall 2017, Fall 2016
Design and analysis of processes involving chemical change. Strategies for design, such as creative thinking and (re)definition of the design goal. Methods for analyzing designs, such as mathematical modeling, empirical analysis by graphics, and dynamic scaling by dimensional analysis. Design choices in light of process efficiency, product quality, economics, safety, and environmental issues.
Introduction to Chemical Engineering Design: Read More [+]
Rules & Requirements
Prerequisites: Math 1B OR Chem 4A
Hours & Format
Fall and/or spring: 15 weeks - 1 hour of lecture and 1.5 hours of discussion per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 84 Sophomore Seminar 1 or 2 Units
Terms offered: Spring 2013, Spring 2012, Spring 2010
Sophomore seminars are small interactive courses offered by faculty members in departments all across the campus. Sophomore seminars offer opportunity for close, regular intellectual contact between faculty members and students in the crucial second year. The topics vary from department to department and semester to semester. Enrollment limited to 15 sophomores.
Sophomore Seminar: Read More [+]
Rules & Requirements
Prerequisites: At discretion of instructor
Repeat rules: Course may be repeated for credit when topic changes. Course may be repeated for credit when topic changes.
Hours & Format
Fall and/or spring:
5 weeks - 3-6 hours of seminar per week
10 weeks - 1.5-3 hours of seminar per week
15 weeks - 1-2 hours of seminar per week
Summer:
6 weeks - 2.5-5 hours of seminar per week
8 weeks - 2-4 hours of seminar per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: The grading option will be decided by the instructor when the class is offered. Final exam required.
CHM ENG 90 Science and Engineering of Sustainable Energy 3 Units
Terms offered: Spring 2018, Spring 2016, Spring 2015
An introduction is given to the science and technologies of producing electricity and transportation fuels from renewable energy resources (biomass, geothermal, solar, wind, and wave). Students will be introduced to quantitative calculations and comparisions of energy technologies together with the economic and political factors affecting the transition from nonrenewable to sustainable energy resources. Mass and energy balances are used to analyze the conversion of energy resources.
Science and Engineering of Sustainable Energy: Read More [+]
Rules & Requirements
Prerequisites: Chemistry 1A or 4A
Hours & Format
Fall and/or spring: 15 weeks - 2 hours of lecture and 1 hour of discussion per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
Instructors: Bell, Segalman
Science and Engineering of Sustainable Energy: Read Less [-]
CHM ENG 98 Directed Group Studies for Lower Division Undergraduates 1 - 3 Units
Terms offered: Fall 2018, Spring 2018, Fall 2017
Supervised research on a specific topic.
Directed Group Studies for Lower Division Undergraduates: Read More [+]
Rules & Requirements
Prerequisites: Consent of instructor
Credit Restrictions: Enrollment is restricted; see the Introduction to Courses and Curricula section of this catalog.
Repeat rules: Course may be repeated for credit without restriction.
Hours & Format
Fall and/or spring: 15 weeks - 1-3 hours of directed group study per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.
Directed Group Studies for Lower Division Undergraduates: Read Less [-]
CHM ENG 98W Directed Group Study 1 Unit
Terms offered: Fall 2015
Directed group study consisting of supplementary problem sets, review sessions, and discussions related to chemical engineering. Topics vary with instructor.
Directed Group Study: Read More [+]
Rules & Requirements
Prerequisites: This Chemical Engineering 98W is planned for students who are concurrently enrolled in Chemical Engineering 140
Repeat rules: Course may be repeated for credit when topic changes. Course may be repeated for credit when topic changes.
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of independent study per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.
CHM ENG 140 Introduction to Chemical Process Analysis 4 Units
Terms offered: Fall 2018, Fall 2017, Fall 2016
Material and energy balances applied to chemical process systems. Determination of thermodynamic properties needed for such calculations. Sources of data. Calculation procedures.
Introduction to Chemical Process Analysis: Read More [+]
Rules & Requirements
Prerequisites: Chemistry 4B or 1B with a grade of C- or better; and Physics 7B (may be taken concurrently)
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 141 Chemical Engineering Thermodynamics 4 Units
Terms offered: Spring 2018, Spring 2016, Spring 2015
Thermodynamic behavior of pure substances and mixtures. Properties of solutions, phase equilibria. Thermodynamic cycles. Chemical equilibria for homogeneous and heterogeneous systems.
Chemical Engineering Thermodynamics: Read More [+]
Rules & Requirements
Prerequisites: 140 with a grade of C- or higher; Engineering 7, which may be taken concurrently
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 142 Chemical Kinetics and Reaction Engineering 4 Units
Terms offered: Fall 2018, Fall 2017, Fall 2016
Analysis and prediction of rates of chemical conversion in flow and nonflow processes involving homogeneous and heterogeneous systems.
Chemical Kinetics and Reaction Engineering: Read More [+]
Rules & Requirements
Prerequisites: 141 with a grade of C- or higher; 150B, which may be taken concurrently
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 143 Computational Methods in Chemical Engineering 4 Units
Terms offered: Spring 2016
The purpose of Chemical Engineering Modeling and Computations in Chemical Engineering is to teach students the methodologies used in setting up mathematical models of simple chemical processes and operations, and the numerical techniques used to simulate them. Included are techniques to obtain physical properties of mixtures/solutions using equations of state. This is followed by simple processes such as vapor liquid equilibrium, separation operations such as distillation, heat transfer, and chemical reactions in ideal reactors such as stirred tank and plug flow. Later on, real chemical process equipment and processes are modeled and simulated, using many of the techniques learned earlier. Programming languages such as Matlab and...
Computational Methods in Chemical Engineering: Read More [+]
Objectives Outcomes
Course Objectives: The focus of this course is on developing insights into chemical processes and operations through the use of modeling and computations. This is not a programming course. The instructors will provide introduction to the use of Aspen and the other codes, but the majority of the learning will be through the active use of these programs by the students in solving assigned problems.
Student Learning Outcomes: The course will be consistent with the overall objectives of the Chemical Engineering curriculum as outlined in the ABET guidelines.
Rules & Requirements
Prerequisites: E7 and CHM ENG 140
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture and 3 hours of laboratory per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Alternative to final exam.
Computational Methods in Chemical Engineering: Read Less [-]
CHM ENG 150A Transport Processes 4 Units
Terms offered: Spring 2018, Spring 2016, Spring 2015
Principles of fluid mechanics and heat transfer with application to chemical processes. Laminar and turbulent flow in pipes and around submerged objects. Flow measurement. Heat conduction and convection; heat transfer coefficients.
Transport Processes: Read More [+]
Rules & Requirements
Prerequisites: 140 with a grade of C- or higher; Math 54, which may be taken concurrently
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 150B Transport and Separation Processes 4 Units
Terms offered: Fall 2018, Fall 2017, Fall 2016
Principles of mass transfer with application to chemical processes. Diffusion and convection. Simultaneous heat and mass transfer; mass transfer coefficients. Design of staged and continuous separations processes.
Transport and Separation Processes: Read More [+]
Rules & Requirements
Prerequisites: Chemical and Biomolecular Engineering 141 with a grade of C- or higher; Chemical and Biomolecular Engineering 150A with a grade of C- or higher; Engineering 7
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week
Summer: 8 weeks - 6 hours of lecture and 2 hours of discussion per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 154 Chemical Engineering Laboratory 4 Units
Terms offered: Fall 2018, Spring 2018, Fall 2017
Experiments in physical measurements, fluid mechanics, heat and mass transfer, kinetics, and separation processes. Emphasis on investigation of basic relationships important in engineering. Experimental design, analysis of results, and preparation of engineering reports are stressed.
Chemical Engineering Laboratory: Read More [+]
Rules & Requirements
Prerequisites: Chemical and Biomolecular Engineering 141, 142, and 150B
Hours & Format
Fall and/or spring: 15 weeks - 1 hour of lecture and 8 hours of laboratory per week
Summer: 8 weeks - 2 hours of lecture and 16 hours of laboratory per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 160 Chemical Process Design 4 Units
Terms offered: Fall 2018, Summer 2018 8 Week Session, Spring 2018
Design principles of chemical process equipment. Design of integrated chemical processes with emphasis upon economic considerations.
Chemical Process Design: Read More [+]
Rules & Requirements
Prerequisites: Chemical and Biomolecular Engineering 142, 150B, and 154. 154 can be taken concurrently
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture and 3 hours of laboratory per week
Summer: 8 weeks - 6 hours of lecture and 6 hours of laboratory per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 161S Industrial Chemical Process Design 6 Units
Terms offered: Prior to 2007
Design of chemical processes and equipment, with an emphasis on industry-sponsored and/or industry-tailored processes
Industrial Chemical Process Design: Read More [+]
Objectives Outcomes
Course Objectives: Teach students the strategies used in the design of chemical processes through an authentic industrial project.
Student Learning Outcomes: • Develop an ability to function on multi-disciplinary teams.
• Develop the ability to design an integrated chemical engineering-based process to meet stated objectives within realistic constraints.
• Establish proficiency in the design process and project management fundamentals.
• Gain an understanding of professional and ethical responsibilities.
Rules & Requirements
Prerequisites: Prerequisites: Chemical and Biomolecular Engineering 142, 150B, and 154
Hours & Format
Summer: 8 weeks - 6 hours of lecture and 6 hours of discussion per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
Instructors: Bryan, Sciamanna
CHM ENG 162 Dynamics and Control of Chemical Processes 4 Units
Terms offered: Fall 2018, Spring 2018, Fall 2017
Analysis of the dynamic behavior of chemical processes and methods and theory of their control. Implementation of computer control systems on process simulations.
Dynamics and Control of Chemical Processes: Read More [+]
Rules & Requirements
Prerequisites: Chemical and Biomolecular Engineering 142 and 150B; Mathematics 53 and 54
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of laboratory per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 170A Biochemical Engineering 3 Units
Terms offered: Fall 2018, Fall 2016, Spring 2016
This course intends to introduce chemical engineers to the basic concepts of biochemical engineering. The course focuses on the use of chemical engineering skills and principles in the analysis and design of biologically-based processes. The main emphasis will be on biochemical kinetics, heat and mass transfer, thermodynamics, and transport phenomena as they apply to enzyme catalysis, microbial growth and metabolism, fermentation and bioreactor design, product recovery and downstream processing. Fundamental topics in biological sciences will be introduced as necessary throughout the course.
Biochemical Engineering: Read More [+]
Rules & Requirements
Prerequisites: Chemical and Biomolecular Engineering 142, 150B, or consent of instructor; Biology 1A
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture and 1 hour of discussion per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
Instructor: Clark
CHM ENG 170B Biochemical Engineering 3 Units
Terms offered: Spring 2014, Spring 2013, Spring 2012
The second of a two-semester sequence intended to introduce chemical engineers to the basic concepts of biochemical engineering. The course focuses on the use of chemical engineering skills and principles in the analysis and design of biologically-based processes. The emphasis will be on biochemical kinetics, protein engineering, cell growth and metabolism, bioreactor design, downstream processing, pharmacokinetics, drug delivery, and ethics.
Biochemical Engineering: Read More [+]
Rules & Requirements
Prerequisites: 170A: Chemistry 135 or Molecular and Cell Biology 102, which may be taken concurrently
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
Instructor: Clark
Formerly known as: 170
CHM ENG C170L Biochemical Engineering Laboratory 3 Units
Terms offered: Fall 2018, Spring 2018, Spring 2014, Spring 2013
Laboratory techniques for the cultivation of microorganisms in batch and continuous reactions. Enzymatic conversion processes. Recovery of biological products.
Biochemical Engineering Laboratory: Read More [+]
Rules & Requirements
Prerequisites: Chemical Engineering 170A (may be taken concurrently) or consent of instructor
Hours & Format
Fall and/or spring: 15 weeks - 7 hours of laboratory and 1 hour of lecture per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
Also listed as: CHEM C170L
CHM ENG 171 Transport Phenomena 3 Units
Terms offered: Fall 2018, Spring 2011, Spring 2009
Study of momentum, energy, and mass transfer in laminar and turbulent flow.
Transport Phenomena: Read More [+]
Rules & Requirements
Prerequisites: 150B
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 176 Principles of Electrochemical Processes 3 Units
Terms offered: Spring 2018, Fall 2016, Fall 2014
Principles and application of electrochemical equilibria, kinetics, and transport processes. Technical electrolysis and electrochemical energy conversion.
Principles of Electrochemical Processes: Read More [+]
Rules & Requirements
Prerequisites: Chemical and Biomolecular Engineering 141, 142, and 150B
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG C178 Polymer Science and Technology 3 Units
Terms offered: Spring 2018, Fall 2016, Spring 2016, Spring 2015
An interdisciplinary course on the synthesis, characterization, and properties of polymer materials. Emphasis on the molecular origin of properties of polymeric materials and technological applications. Topics include single molecule properties, polymer mixtures and solutions, melts, glasses, elastomers, and crystals. Experiments in polymer synthesis, characterization, and physical properties.
Polymer Science and Technology: Read More [+]
Rules & Requirements
Prerequisites: Junior standing
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture and 3 hours of laboratory per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
Instructor: Segalman
Also listed as: CHEM C178
CHM ENG 179 Process Technology of Solid-State Materials Devices 3 Units
Terms offered: Fall 2018, Fall 2017, Fall 2016
Chemical processing and properties of solid-state materials. Crystal growth and purification. Thin film technology. Application of chemical processing to the manufacture of semiconductors and solid-state devices.
Process Technology of Solid-State Materials Devices: Read More [+]
Rules & Requirements
Prerequisites: Engineering 45; one course in electronic circuits recommended; senior standing
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
Process Technology of Solid-State Materials Devices: Read Less [-]
CHM ENG 180 Chemical Engineering Economics 3 Units
Terms offered: Fall 2017, Fall 2016, Fall 2015
Optimal design of chemical processes and unit operations, emphasizing the interactions between technical and economic considerations. Analysis of process risks. Chemical and biomolecular process design in the presence of uncertainties. Interest rate determinants and their effects on chemical process feasibility and choices. Relationships between structure and behavior of firms in the chemical processing industries. Multivariable input-output analyses.
Chemical Engineering Economics: Read More [+]
Rules & Requirements
Prerequisites: Chemical and Biomolecular Engineering 142 and 150B. Consent of instructor
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG 182 Nanoscience and Engineering Biotechnology 3 Units
Terms offered: Fall 2018
This nanoscale science and biomolecular engineering course will cover emerging topics in applied biotechnology and nanotechnology. Topics include enzyme kinetics, enzyme inhibition, recombinant protein generation, cell culture, genome editing, drug design, nanoparticle-based gene and drug delivery, fluorescence imaging, and sensors. The course will also probe the interface of biology with nanomaterials, and standard microscopic techniques to image biological structures and nanoscale materials.
Nanoscience and Engineering Biotechnology: Read More [+]
Rules & Requirements
Prerequisites: Bio 1A or BioE 11 and Physics 7A
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
Instructor: Landry
CHM ENG H193 Senior Honors Thesis 3 Units
Terms offered: Spring 2016, Fall 2015, Spring 2015
A senior honors thesis is written in consultation with the student's faculty research advisor. This is a required course for students wishing to graduate with honors in Chemical Engineering.
Senior Honors Thesis: Read More [+]
Rules & Requirements
Prerequisites: Senior standing, approval of faculty research advisor, overall GPA of 3.4 or higher
Hours & Format
Fall and/or spring: 15 weeks - 9 hours of independent study per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Alternative to final exam.
CHM ENG H194 Research for Advanced Undergraduates 2 - 4 Units
Terms offered: Summer 2016 10 Week Session, Spring 2016, Fall 2015
Original research under direction of one of the members of the staff.
Research for Advanced Undergraduates: Read More [+]
Rules & Requirements
Prerequisites: Minimum GPA of 3.4 overall at Berkeley and consent of instructor
Repeat rules: Course may be repeated for credit without restriction.
Hours & Format
Fall and/or spring: 15 weeks - 0 hours of independent study per week
Summer:
6 weeks - 1-5 hours of independent study per week
8 weeks - 1-4 hours of independent study per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam not required.
CHM ENG 195 Special Topics 2 - 4 Units
Terms offered: Fall 2018, Fall 2017, Spring 2016
Fall 2017's Special Topic: Nanoscience and Engineering Biotechnology
This nanoscale science and biomolecular engineering course will cover emerging topics in applied biotechnology. Topics include bioanalytical chemistry, recombinant protein generation and purification, cell culture, immunology, nanomaterials in biology, bio-toxicity, and biomolecular sensors. The scope of the course will also probe the interface of biology with nanomaterials, and standard microscopic and spectroscopic techniques to image both biological structures and nanoscale materials.
Special Topics: Read More [+]
Rules & Requirements
Prerequisites: Consent of instructor
Repeat rules: Course may be repeated for credit without restriction.
Hours & Format
Fall and/or spring: 15 weeks - 2-4 hours of independent study per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
CHM ENG C195A The Berkeley Lectures on Energy: Energy from Biomass 3 Units
Terms offered: Fall 2015, Fall 2014, Fall 2013
After an introduction to the different aspects of our global energy consumption, the course will focus on the role of biomass. The course will illustrate how the global scale of energy guides the biomass research. Emphasis will be placed on the integration of the biological aspects (crop selection, harvesting, storage and distribution, and chemical composition of biomass) with the chemical aspects to convert biomass to energy. The course aims to engage students in state-of-the-art research.
The Berkeley Lectures on Energy: Energy from Biomass: Read More [+]
Rules & Requirements
Prerequisites: Chemistry 1B or Chemistry 4B, Mathematics 1B, Biology 1A
Repeat rules: Course may be repeated for credit under special circumstances: Repeatable when topic changes with consent of instructor.Repeatable when topic changes with consent of instructor.
Hours & Format
Fall and/or spring: 15 weeks - 3 hours of lecture per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam required.
Instructors: Bell, Blanch, Clark, Smit, C. Somerville
Also listed as: BIO ENG C181/CHEM C138/PLANTBI C124
The Berkeley Lectures on Energy: Energy from Biomass: Read Less [-]
CHM ENG 196 Special Laboratory Study 2 - 4 Units
Terms offered: Spring 2016, Fall 2015, Spring 2015
Special laboratory or computational work under direction of one of the members of the staff.
Special Laboratory Study: Read More [+]
Rules & Requirements
Prerequisites: Consent of instructor
Repeat rules: Course may be repeated for credit without restriction.
Hours & Format
Fall and/or spring: 15 weeks - 2-3 hours of independent study per week
Summer:
6 weeks - 5-8 hours of independent study per week
8 weeks - 3.5-6 hours of independent study per week
10 weeks - 3-4.5 hours of independent study per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Letter grade. Final exam not required.
CHM ENG 197 Field Study in Chemical Engineering 1 - 4 Units
Terms offered: Spring 2016, Fall 2015, Spring 2015
Supervised experience in off-campus organizations relevant to specific aspects and applications of chemical engineering. Written report required at the end of the term. Course does not satisfy unit or residence requirements for the bachelor's degree.
Field Study in Chemical Engineering: Read More [+]
Rules & Requirements
Prerequisites: Upper division standing and consent of instructor
Repeat rules: Course may be repeated for credit without restriction.
Hours & Format
Fall and/or spring: 15 weeks - 1-4 hours of fieldwork per week
Summer:
6 weeks - 2.5-10 hours of fieldwork per week
8 weeks - 1.5-7.5 hours of fieldwork per week
10 weeks - 1.5-6 hours of fieldwork per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.
Instructor: Strauss
CHM ENG 198 Directed Group Study for Undergraduates 1 - 3 Units
Terms offered: Fall 2018, Spring 2018, Fall 2017
Supervised research on a specific topic. Enrollment is restricted; see Introduction to Courses and Curricula section in the General Catalog.
Directed Group Study for Undergraduates: Read More [+]
Rules & Requirements
Prerequisites: Completion of 60 units of undergraduate study and in good academic standing
Repeat rules: Course may be repeated for credit without restriction.
Hours & Format
Fall and/or spring: 15 weeks - 1-3 hours of lecture per week
Summer: 6 weeks - 2.5-7.5 hours of lecture per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.
CHM ENG 199 Supervised Independent Study and Research 1 - 4 Units
Terms offered: Spring 2016, Fall 2015, Spring 2015
Supervised Independent Study and Research: Read More [+]
Rules & Requirements
Repeat rules: Course may be repeated for credit without restriction.
Hours & Format
Fall and/or spring: 15 weeks - 1-4 hours of independent study per week
Summer:
6 weeks - 2.5-10 hours of independent study per week
8 weeks - 1.5-7.5 hours of independent study per week
10 weeks - 1.5-6 hours of independent study per week
Additional Details
Subject/Course Level: Chemical & Biomolecular Engineering/Undergraduate
Grading/Final exam status: Offered for pass/not pass grade only. Final exam not required.
Faculty and Instructors
+ Indicates this faculty member is the recipient of the Distinguished Teaching Award.
Faculty
Keith Alexander, Adjunct Professor. New Product Development; Technology Commercialization.
Nitash P. Balsara, Professor. Chemical engineering, synthesis and characterization of soft microstructured polymer materials, nucleation, neutron scattering, depolarized light scattering.
Research Profile
Alexis T. Bell, Professor. Understanding the fundamental relationships between the structure and composition of heterogeneous catalysts and their performance.
Research Profile
Elton J. Cairns, Professor. Electrochemistry and electrocatalysis.
Research Profile
Carlo Carraro, Adjunct Professor.
Douglas S. Clark, Professor. Biochemical engineering and biocatalysis.
Research Profile
David B. Graves, Professor. Plasma processing and electronic materials.
Research Profile
Teresa Head-Gordon, Professor. Computational chemistry, biophysics, bioengineering, biomolecules, materials, computational science.
Research Profile
Enrique Iglesia, Professor. Chemical engineering, catalytic materials, heterogeneous catalysis, chemical reaction engineering, methane and biomass coversion processes, refining processes, hydrogen generation, alkane activation deoxygenatiion and desulfurization catalysis, zeolites.
Research Profile
Alexander Katz, Assistant Professor. Chemical engineering, nanoengineering, catalytic imprinted silicas, catalysts in biological systems, catalysis, chemical sensing.
Research Profile
Jay Keasling, Professor. Microorganism metabolic engineering for environmentally friendly product.
Research Profile
Sanjay Kumar, Professor. Biomaterials, molecular and cellular bioengineering, stem cells, cancer biology, translational medicine.
Research Profile
Markita Landry, Assistant Professor. Nanomaterials, single-molecule fluorescence microscopy, biophysics.
Research Profile
Jeffrey R. Long, Professor. Inorganic and solid state chemistry, synthesis of inorganic clusters and solids, controlling structure, tailoring physical properties, intermetal bridges, high-spin metal-cyanide clusters, magnetic bistability.
Research Profile
Roya Maboudian, Professor. Surface and interfacial science and engineering, thin-film science and technology, micro-/nano-systems technology, harsh-environment sensors, silicon carbide, biologically-inspired materials synthesis.
Research Profile
Brian Maiorella, Adjunct Professor.
Kranthi K. Mandadapu, Assistant Professor. Statistical Mechanics, Continuum Mechanics — Polycrystalline Materials, Biological Membranes, Bacterial Motility.
Research Profile
Bryan D. McCloskey, Assistant Professor. Electrochemical energy storage, electrocatalysis, molecular and ionic transport through polymers.
Research Profile
Ali Mesbah, Assistant Professor. Process Systems and Control.
Research Profile
Susan J. Muller, Professor. Chemical engineering, fluid mechanics, Rheology, complex fluids, microfabrication processes, Genetic Engineering of Protein Polymers, Finite Element Modeling of Bubbles, Stress Fluids, Taylor-Couette instabilities.
Research Profile
John M. Prausnitz, Professor. Molecular thermodynamics of phase equilibria.
Research Profile
+ Clayton J. Radke, Professor. Surface and colloid science technology.
Research Profile
+ Jeffrey A. Reimer, Professor. Materials chemistry, applied spectroscopy, alternative energy, nuclear spintronics.
Research Profile
David Schaffer, Professor. Neuroscience, biomolecular engineering, bioengineering, stem cell biology, gene therapy.
Research Profile
Berend Smit, Professor. Molecular simulations, multi-scale modeling, catalysts, soft-condensed matter, biological membranes, clays.
Research Profile
Wenjun Zhang, Assistant Professor. Natural product biosynthesis and engineering for health and bioenergy applications.
Research Profile
Lecturers
Shannon Ciston, Lecturer.
Dean C. Draemel, Lecturer.
Alexandra Landry, Lecturer.
Gregory R. Schoofs, Lecturer.
Steve Sciamanna, Lecturer.
George Tyson, Lecturer.
Ravi Upadhye, Lecturer.
P. Henrik Wallman, Lecturer.
Marjorie Went, Lecturer.
Emeritus Faculty
Harvey W. Blanch, Professor Emeritus. Biochemical Engineering.
Research Profile
Morton Denn, Professor Emeritus.
Jean M. J. Frechet, Professor Emeritus. Materials chemistry, catalysis, drug delivery, analytical chemistry, organic synthesis, polymer science, macromolecules, chiral recognition, control of molecular architecture at the nanometer scale, reactive surfaces.
Research Profile
Simon Goren, Professor Emeritus.
C. Judson King, Professor Emeritus. Separation processes, spray drying, and higher education.
Research Profile
Scott Lynn, Professor Emeritus.
John S. Newman, Professor Emeritus. Chemical engineering, electrochemical systems, lithium batteries, industrial electrochemical processes, methanol fuel cells.
Research Profile
+ Michael C. Williams, Professor Emeritus.
Contact Information
Department of Chemical and Biomolecular Engineering
201 Gilman Hall
Phone: 510-642-2291
Adviser, Continuing Students S-Z
Shamaya Pellum
121 Gilman Hall
Phone: 510-643-1745
Director of Undergraduate Education
Shannon Ciston
101-A Gilman Hall
Phone: 510-643-8544