Nuclear Engineering

University of California, Berkeley

This is an archived copy of the 2017-18 guide. To access the most recent version of the guide, please visit http://guide.berkeley.edu.

About the Program

The Department of Nuclear Engineering offers three graduate degree programs: the Doctor of Philosophy (PhD), the Master of Engineering (MEng), and the Public Policy (MPP)/Nuclear Engineering (MS) Concurrent Degree Program.

Visit Department Website

Admissions

Admission to the University

Minimum Requirements for Admission

The following minimum requirements apply to all graduate programs and will be verified by the Graduate Division:

  1. A bachelor’s degree or recognized equivalent from an accredited institution;
  2. A grade point average of B or better (3.0);
  3. If the applicant comes from a country or political entity (e.g., Quebec) where English is not the official language, adequate proficiency in English to do graduate work, as evidenced by a TOEFL score of at least 90 on the iBT test, 570 on the paper-and-pencil test, or an IELTS Band score of at least 7 (note that individual programs may set higher levels for any of these); and
  4. Sufficient undergraduate training to do graduate work in the given field.

Applicants Who Already Hold a Graduate Degree

The Graduate Council views academic degrees not as vocational training certificates, but as evidence of broad training in research methods, independent study, and articulation of learning. Therefore, applicants who already have academic graduate degrees should be able to pursue new subject matter at an advanced level without need to enroll in a related or similar graduate program.

Programs may consider students for an additional academic master’s or professional master’s degree only if the additional degree is in a distinctly different field.

Applicants admitted to a doctoral program that requires a master’s degree to be earned at Berkeley as a prerequisite (even though the applicant already has a master’s degree from another institution in the same or a closely allied field of study) will be permitted to undertake the second master’s degree, despite the overlap in field.

The Graduate Division will admit students for a second doctoral degree only if they meet the following guidelines:

  1. Applicants with doctoral degrees may be admitted for an additional doctoral degree only if that degree program is in a general area of knowledge distinctly different from the field in which they earned their original degree. For example, a physics PhD could be admitted to a doctoral degree program in music or history; however, a student with a doctoral degree in mathematics would not be permitted to add a PhD in statistics.
  2. Applicants who hold the PhD degree may be admitted to a professional doctorate or professional master’s degree program if there is no duplication of training involved.

Applicants may apply only to one single degree program or one concurrent degree program per admission cycle.

Required Documents for Applications

  1. Transcripts: Applicants may upload unofficial transcripts with your application for the departmental initial review. If the applicant is admitted, then official transcripts of all college-level work will be required. Official transcripts must be in sealed envelopes as issued by the school(s) attended. If you have attended Berkeley, upload your unofficial transcript with your application for the departmental initial review. If you are admitted, an official transcript with evidence of degree conferral will not be required.
  2. Letters of recommendation: Applicants may request online letters of recommendation through the online application system. Hard copies of recommendation letters must be sent directly to the program, not the Graduate Division.
  3. Evidence of English language proficiency: All applicants from countries or political entities in which the official language is not English are required to submit official evidence of English language proficiency. This applies to applicants from Bangladesh, Burma, Nepal, India, Pakistan, Latin America, the Middle East, the People’s Republic of China, Taiwan, Japan, Korea, Southeast Asia, most European countries, and Quebec (Canada). However, applicants who, at the time of application, have already completed at least one year of full-time academic course work with grades of B or better at a US university may submit an official transcript from the US university to fulfill this requirement. The following courses will not fulfill this requirement:
    • courses in English as a Second Language,
    • courses conducted in a language other than English,
    • courses that will be completed after the application is submitted, and
    • courses of a non-academic nature.

If applicants have previously been denied admission to Berkeley on the basis of their English language proficiency, they must submit new test scores that meet the current minimum from one of the standardized tests.

Where to Apply

Visit the Berkeley Graduate Division application page

Admission to the Program

Admission to the graduate program in nuclear engineering is available to qualified individuals who have obtained a bachelor’s degree from a recognized institution in one of the fields of engineering or the physical sciences. For all programs, required preparation in undergraduate coursework includes mathematics through partial differential equations and advanced analysis, nuclear reactions, and thermodynamics. Admission is granted on the basis of undergraduate and graduate records (if any), statement of purpose, record of work experience and professional activities, letters of recommendation, and the Graduate Record Examination (GRE) and Test of English as a Foreign Language (TOEFL), if applicable.

Doctoral Degree Requirements

In order to receive the PhD in Nuclear Engineering, all students must successfully complete the following three milestones: 

  • Required coursework: major and minor requirements
  • Departmental exams: first year screening exams and the oral qualifying exam
  • Dissertation

Curriculum

Courses Required
Major Field (6 Graduate Level Nuclear Engineering Electives). A 3.5 GPA in the major is required.
One Technical Minor Field Outside Nuclear Engineering (2-3 courses; 1 course must be graduate level). A 3.0 GPA minimum is required for both minors.
One Technical Minor Field Outside or in Nuclear Engineering (2-3 courses; 1 course must be graduate level). All courses taken to fulfill the PhD course requirement must be letter-graded.

Departmental Exams

Screening Exam

Students must pass a written screening exam during the first year in graduate study. The exam is based on undergraduate thermodynamics, nuclear materials, heat transfer and fluid mechanics, nuclear physics, neutronics, radiaoactive waste management and fusion theory. Four of the seven areas must be passed in order the pass the exam. There are two chances to pass.

Oral Exam

After completion of the coursework for the PhD the student takes the oral exam. The content of the exam is usually a presentation of the student's research and questions relating the coursework in the outside minor. The exam committee is composed of four faculty members (normally three from the department and a non-departmental faculty member who represents an outside minor).

PhD Dissertation

A dissertation on a subject chosen by the candidate, bearing on the principal subject of the student's major study and demonstrating the candidate's ability to carry out independent investigation, must be completed and receive the approval of the dissertation committee and the dean of the Graduate Division. The committee consists of three members, including the instructor in charge of the dissertation and one member outside the candidate's department.

Master's Degree Requirements (MEng)

Master of Engineering (MEng)

In collaboration with other departments in the College of Engineering, Nuclear Engineering offers a one-year professional master's degree. The accelerated program is designed to develop professional engineering leaders who understand the technical, environmental, economic, and social issues involved in the design and operation of nuclear engineering devices, systems, and organizations. Prospective students will be engineers, typically with industrial experience, who aspire to substantially advance in their careers and ultimately to lead large, complex organizations, including governments.

The interdisciplinary degree will consist of three major components, comprising a technical specialization in NE (minimum 12 graduate units), a “breadth” curriculum of engineering leadership courses (6 units), and an integrative capstone project (5 units). See The Fung Institute for more details.

Coursework

Nuclear Engineering Course Requirements:

  • 12 units of 200 level NE graduate courses in area of concentration.
  • Courses must be taken for a letter grade

Core Leadership Course Requirements:

6 units of 200 level leadership courses consisting of:

  • Engineering Leadership I (3 units)
  • Engineering Leadership II (3 units)
  • Courses must be taken for a letter grade

Capstone Project Course Requirements:

  • 5 units of 296M A-B (Capstone Project)
    • 2 units during the fall semester
    • 3 units during the spring semester
  • 2 units of 295 (Capstone Integration)
    • 1 unit during the fall semester
    • 1 unit during the spring semester
  • Courses must be taken for a letter grade
Capstone Project:

Students are required to complete a capstone project. The project enables the student to integrate the core leadership curriculum with the concentration and gain hands-on industry experience.  The capstone committee must consist of two members, one of which must be in the department of Nuclear Engineering.  Both committee members must also be members of the UC Berkeley Academic Senate.

Oral Presentation and Report:

An oral presentation and a written report of the capstone project are required by the end of the spring semester. The audience at the oral presentation must consist of the students NE Advisor, instructor(s), peers, and industry partners.

Master's Degree Requirements (MS)

The Master's of Science Track is only accessible to students enrolled in our PhD program.  Applicants interested in the Master's degree are encouraged to apply to the Nuclear Engineering Master of Engineering program.  

Master's students must choose between two degree plan options: Plan I or Plan II. Plan I requires at least 20 semester units of upper division and graduate courses, plus a thesis. At least 8 of these units must be in 200 series courses in the student's major subject. Plan II requires at least 24 semester units of upper division and graduate courses, followed by a comprehensive final examination administered by the department. At least 12 units must be in graduate courses in the student's major subject. In Nuclear Engineering, the examination takes the form of a project and presentation. An overall GPA of 3.0 is required at the time of graduation.

Curriculum

Courses Required
Thesis: Approved study list of Nuclear Engineering Electives (8 graduate courses minimum) 20
Project Plan: Approved study list of Nuclear Engineering Electives (12 graduate courses minimum)24

Both MS Plan I and Plan II are subject to the following:

i) Units for 298 (seminar) courses are not counted towards the degree.

ii) A study plan approved by the major field adviser is required each semester.

iii) A maximum of 4 units of coursework from approved non-academic institutions or 4 units from another academic institution can be used, provided course was taken while in graduate standing and meets departmental approval.

iv) Units for graduate courses taken as an undergraduate are allowed if the units were in excess of units required to satisfy the BS degree requirements.

Other Requirements

Plan I: Thesis (Requires thesis committee composed of three faculty.)

Plan II: Completion of a project culminating in a written report and an oral presentation before a committee of three faculty members or two faculty members and one approved non-university person. Approval by the professor in charge of the research project and the chair of the graduate advisers is required.

All students must take at least two letter-grade NE courses during the first year as a graduate student.

Master's Degree Requirements (MPP/MS)

Public Policy (MPP) and Nuclear Engineering (MS) Concurrent Degree Program

Government and technology interact more, and with greater consequences, every year.  Whether the issue area is nuclear security, environmental protection, intellectual property (copyright and the internet), health care, water supply, or any of myriad other contexts, government agencies at all levels, non-profit organizations and private industry need people who understand technology on its own terms and also the ways government supports, controls, or directs it.  Because this program is small, each student’s program tends to be customized with the agreement of advisors in both programs.

Basic Requirements

Year 1
Completion of the MPP first year core curriculum.
Summer Internship.
Year 2
Complete required units in nuclear engineering, plus six elective agreeable to both schools.
Complete a paper that satisfies the MS Plan I or Plan II requirement, and the MPP APA (Advanced Policy Analysis) requirement.

For more information about this program, contact Michael Nacht (Professor of Public Policy, 510-643-4038) or Karl van Bibber (Chair of the Nuclear Engineering Department, 510-642-3477). 

Courses

Nuclear Engineering

NUC ENG 200M Introduction to Nuclear Engineering 3 Units

Terms offered: Spring 2018, Spring 2017
Overview of the elements of nuclear technology in use today for the production of energy and other radiation applications. Emphasis is on nuclear fission as an energy source, with a study of the basic physics of the nuclear fission process followed by detailed discussions of issues related to the control, radioactivity management, thermal energy management, fuel production, and spent fuel management. A discussion of the various reactor types in use around
the world will include analysis of safety and nuclear proliferation issues surrounding the various technologies. Case studies of some reactor accidents and other nuclear-related incidents will be included.
Introduction to Nuclear Engineering: Read More [+]

NUC ENG 201 Nuclear Reactions and Interactions of Radiation with Matter 4 Units

Terms offered: Spring 2018, Spring 2016, Spring 2014
Interaction of gamma rays, neutrons, and charged particles with matter; nuclear structure and radioactive decay; cross sections and energetics of nuclear reactions; nuclear fission and the fission products; fission and fusion reactions as energy sources.

Nuclear Reactions and Interactions of Radiation with Matter: Read More [+]

NUC ENG 204 Advanced Concepts in Radiation Detection and Measurements 3 Units

Terms offered: Fall 2018, Fall 2015, Fall 2013
Advanced concepts in the detection of ionizing radiation relevant for basic and applied sciences, nuclear non-proliferation, and homeland security. Concepts of signal generation and processing with advantages and drawbacks of a range of detection technologies. Laboratory comprises experiments to compare conventional analog and advanced digital signal processing, information generation and processing, position-sensitive detection, tracking, and
imaging modalities.
Advanced Concepts in Radiation Detection and Measurements: Read More [+]

NUC ENG 220 Irradiation Effects in Nuclear Materials 3 Units

Terms offered: Spring 2017, Spring 2015, Spring 2013
Physical aspects and computer simulation of radiation damage in metals. Void swelling and irradiation creep. Mechanical analysis of structures under irradiation. Sputtering, blistering, and hydrogen behavior in fusion reactor materials.

Irradiation Effects in Nuclear Materials: Read More [+]

NUC ENG 221 Corrosion in Nuclear Power Systems 3 Units

Terms offered: Spring 2018, Spring 2016, Spring 2014
Structural metals in nuclear power plants; properties and fabrication of Zircaloy; aqueous corrosion of reactor components; structural integrity of reactor components under combined mechanical loading, neutron irradiation, and chemical environment.

Corrosion in Nuclear Power Systems: Read More [+]

NUC ENG 224 Safety Assessment for Geological Disposal of Radioactive Wastes 3 Units

Terms offered: Spring 2014, Spring 2013, Spring 2012
Multi-barrier concept; groundwater hydrology, mathematical modeling of mass transport in heterogeneous media, source term for far-field model; near-field chemical environment, radionuclide release from waste solids, modeling of radionuclide transport in the near field, effect of temperature on repository performance, effect of water flow, effect of geochemical conditions, effect of engineered barrier alteration; overall performance assessment
, performance index, uncertainty associated with assessment, regulation and standards.
Safety Assessment for Geological Disposal of Radioactive Wastes: Read More [+]

NUC ENG 225 The Nuclear Fuel Cycle 3 Units

Terms offered: Spring 2015, Spring 2013, Spring 2011
This course is intended for graduate students interested in acquiring a foundation in nuclear fuel cycle with topics ranging from nuclear-fuel reprocessing to waste treatment and final disposal. The emphasis is on the relationship between nuclear-power utilization and its environmental impacts. The goal is for graduate engineering students to gain sufficient understanding in how nuclear-power utilization affects the environment, so that they
are better prepared to design an advanced system that would result in minimized environmental impact. The lectures will consist of two parts. The first half includes mathematical models for individual processes in a fuel cycle, such as nuclear fuel reprocessing, waste solidification, repository performance, and nuclear transmutation in a nuclear reactor. In the second half, these individual models are integrated, which enables students to evaluate environmental impact of a fuel cycle.
The Nuclear Fuel Cycle: Read More [+]

NUC ENG 230 Analytical Methods for Non-Proliferation 3 Units

Terms offered: Spring 2018, Spring 2017, Spring 2016
Use of nuclear measurement techniques to detect clandestine movement and/or possession of nuclear materials by third parties.
Nuclear detection, forensics,signatures, and active and passive interrogation methodologies will be explored. Techniques currently deployed for arms control and treaty verification will be discussed. Emphasis will be placed on common elements of detection technology from the viewpoint of resolution of threat signatures
from false positives due to naturally occurring
radioactive material. Topics include passive and active neutron signals, gamma ray detection, fission neutron multiplicity, and U and Puisotopic identification and age determination.

Analytical Methods for Non-Proliferation: Read More [+]

NUC ENG 250 Nuclear Reactor Theory 4 Units

Terms offered: Fall 2017, Fall 2015, Fall 2013
Fission characteristics; neutron chain reactions, neutron transport and diffusion theory; reactor kinetics; multigroup methods, fast and thermal spectrum calculations, inhomogeneous reactor design, effects of poisons and fuel depletion.

Nuclear Reactor Theory: Read More [+]

NUC ENG 255 Numerical Simulation in Radiation Transport 3 Units

Terms offered: Fall 2018, Fall 2016, Fall 2014
Computational methods used to analyze nuclear reactor systems described by various differential, integral, and integro-differential equations. Numerical methods include finite difference, finite elements, discrete ordinates, and Monte Carlo. Examples from neutron and photon transport, heat transfer, and thermal hydraulics. An overview of optimization techniques for solving the resulting discrete equations on vector and parallel computer system
s.
Numerical Simulation in Radiation Transport: Read More [+]

NUC ENG 256M Nuclear Criticality Safety 3 Units

Terms offered: Not yet offered
This course provides an introduction to the field of nuclear criticality safety. Topics include: a review of basic concepts related to criticality (fission, cross sections, multiplication factor, etc.); criticality safety accidents; standards applicable to criticality safety; hand calculations and Monte Carlo methods used in criticality safety analysis; criticality safety evaluation documents.

Nuclear Criticality Safety: Read More [+]

NUC ENG 260 Thermal Aspects of Nuclear Reactors 4 Units

Terms offered: Fall 2016, Fall 2014, Fall 2012
Fluid dynamics and heat transfer; thermal and hydraulic analysis of nuclear reactors; two-phase flow and boiling; compressible flow; stress analysis; energy conversion methods.

Thermal Aspects of Nuclear Reactors: Read More [+]

NUC ENG 262 Radiobiology 3 Units

Terms offered: Prior to 2007
Radiobiology is concerned with the action of ionizing radiation on biological tissues and living organisms. It combines two disciplines: radiation physics and biology. Radiobiology combines our understanding of ionizing radiation and molecular biology, and is a required knowledge for health physicists, radiation biologists and medical physicists. This course will provide such knowledge for a diverse group of students with need in either disciplines. This course
represents one of the requisites for the Joint UC Berkeley-UC San Francisco Medical Physics Certificate Program.
Radiobiology: Read More [+]

NUC ENG 265 Design Analysis of Nuclear Reactors 3 Units

Terms offered: Fall 2016, Fall 2015, Fall 2013
Principles and techniques of economic analysis to determine capital and operating costs; fuel management and fuel cycle optimization; thermal limits on reactor performance, thermal converters, and fast breeders; control and transient problems; reactor safety and licensing; release of radioactivity from reactors and fuel processing plants.

Design Analysis of Nuclear Reactors: Read More [+]

NUC ENG 267 Risk-Informed Design for Advanced Nuclear Systems 3 Units

Terms offered: Fall 2017, Fall 2015, Fall 2012
Project-based class for design and licensing of nuclear facilities,including advanced reactors. Elements of a project proposal. Regulatory framework and use of deterministic and probabilistic licensing criteria. Siting criteria. External and internal events. Identification and analysis of design basis and beyond design basis
events. Communication with regulators and stakeholders. Ability to work in and contribute to a design team.

Risk-Informed Design for Advanced Nuclear Systems: Read More [+]

NUC ENG 275 Principles and Methods of Risk Analysis 4 Units

Terms offered: Fall 2018, Fall 2013, Fall 2011
Principles and methodological approaches for the quantification of technological risk and risk-based decision making.

Principles and Methods of Risk Analysis: Read More [+]

NUC ENG 280 Fusion Reactor Engineering 3 Units

Terms offered: Spring 2017, Spring 2015, Spring 2013
Engineering and design of fusion systems. Introduction to controlled thermonuclear fusion as an energy economy, from the standpoint of the physics and technology involved. Case studies of fusion reactor design. Engineering principles of support technology for fusion systems.

Fusion Reactor Engineering: Read More [+]

NUC ENG 281 Fully Ionized Plasmas 3 Units

Terms offered: Spring 2018, Spring 2016, Spring 2014
Introduction to warm and hot magnetized plasmas. Single particle motion in electric and magnetic fields. Collective particle oscillations, waves and instabilities. Magnetohydrodynamic equilibria, stability and transport. Magnetically confined plasmas for controlled fusion. Space plasmas.

Fully Ionized Plasmas: Read More [+]

NUC ENG C282 Charged Particle Sources and Beam Technology 3 Units

Terms offered: Spring 2018, Fall 2015, Fall 2013, Fall 2011
Topics in this course will include the latest technology of various types of ion and electron sources, extraction and formation of charge particle beams, computer simulation of beam propagation, diagnostics of ion sources and beams, and the applications of beams in fusion, synchrotron light source, neutron generation, microelectronics, lithography, and medical therapy. This is a general accelerator technology and engineering course
that will be of interest to graduate students in physics, electrical engineering, and nuclear engineering.
Charged Particle Sources and Beam Technology: Read More [+]

NUC ENG C285 Nuclear Security: The Nexus Between Policy and Technology 4 Units

Terms offered: Spring 2018, Spring 2017, Spring 2016
The course will review the origins and evolution of nuclear energy, how it has been applied for both peaceful and military purposes, and the current and prospective challenges it presents. The purpose of the course is to educate students on the policy roots and technological foundations of nuclear energy and nuclear weapons so they are positioned to make original contributions to the field in their scholarly and professional careers.

Nuclear Security: The Nexus Between Policy and Technology: Read More [+]

NUC ENG 290A Special Topics in Applied Nuclear Physics 3 Units

Terms offered: Fall 2017, Spring 2016, Fall 2014
Special topics in applied nuclear physics. Topics may include applied nuclear reactions and instrumentation, bionuclear and radiological physics, and subsurface nuclear technology, among other possibilities. Course content may vary from semester to semester depending upon the instructor.

Special Topics in Applied Nuclear Physics: Read More [+]

NUC ENG 290B Special Topics in Nuclear Materials and Chemistry 3 Units

Terms offered: Spring 2016, Spring 2015, Spring 2013
Special topics in nuclear materials and chemistry. Topics may include advanced nuclear materials and corrosion. Course content may vary from semester to semester depending upon the instructor.

Special Topics in Nuclear Materials and Chemistry: Read More [+]

NUC ENG 290C Special Topics in Nuclear Energy 3 Units

Terms offered: Summer 2002 10 Week Session
Special topics in nuclear energy. Topics may include fission reactor analysis and engineering, nuclear thermal hydraulics, and risk, safety and large-scale systems analysis. Course content may vary from semester to semester depending on the instructor.

Special Topics in Nuclear Energy: Read More [+]

NUC ENG 290D Special Topics in Nuclear Non-Proliferation 3 Units

Terms offered: Fall 2014, Summer 2005 10 Week Session, Summer 2004 10 Week Session
Special topics in nuclear non-proliferation. Topics may include homeland security and nuclear policy, and nuclear fuel cycle and waster management. Course content may vary from semester to semester depending on the instructor.

Special Topics in Nuclear Non-Proliferation: Read More [+]

NUC ENG 290E Special Topics in Environmental Aspects of Nuclear Energy 3 Units

Terms offered: Fall 2015, Fall 2014, Fall 2008
Special topics in environmental aspects of nuclear energy. Lectures on special topics of interest in environmental impacts of nuclear power utilizations, including severe accidents. The course content may vary from semester to semester, and will be announced at the beginning of each semester.

Special Topics in Environmental Aspects of Nuclear Energy: Read More [+]

NUC ENG 290F Special Topics in Fusion and Plasma Physics 3 Units

Terms offered: Summer 2007 10 Week Session, Summer 2007 3 Week Session
Special topics in fusion and plasma physics. Topics may include laser, particle bean and plasma technologies, fusion science and technology, and accelerators. Course content may vary
from semester to semester depending upon the instructor.

Special Topics in Fusion and Plasma Physics: Read More [+]

NUC ENG 295 Nuclear Engineering Colloquium 0.0 Units

Terms offered: Fall 2018, Spring 2018, Fall 2017
Presentations on current topics of interest in nuclear technology by experts from government, industry and universities. Open to the campus community.

Nuclear Engineering Colloquium: Read More [+]

NUC ENG 298 Group Research Seminars 1 Unit

Terms offered: Fall 2018, Spring 2018, Fall 2017
Seminars in current research topics in nuclear engineering: Section 1 - Fusion; Section 2 - Nuclear Waste Management; Section 3 - Nuclear Thermal Hydraulics; Section 4 - Nuclear Chemistry; Section 6 - Nuclear Materials; Section 7 - Fusion reaction design; Section 8 - Nuclear Instrumentation.

Group Research Seminars: Read More [+]

NUC ENG 299 Individual Research 1 - 12 Units

Terms offered: Fall 2018, Spring 2018, Fall 2017
Investigation of advanced nuclear engineering problems.

Individual Research: Read More [+]

NUC ENG N299 Individual Research 1 - 6 Units

Terms offered: Summer 2009 10 Week Session, Summer 2006 10 Week Session, Summer 2005 10 Week Session
Investigation of advanced nuclear engineering problems.

Individual Research: Read More [+]

NUC ENG 375 Teaching Techniques in Nuclear Engineering 1 - 3 Units

Terms offered: Fall 2018, Fall 2017, Fall 2016
This course is designed to acquaint new teaching assistants with the nature of graduate student instruction in courses in the department of Nuclear Engineering. Discussion, practice, and review of issues relevant to the teaching of nuclear engineering. Effective teaching methods will be introduced by experienced GSIs and faculty.

Teaching Techniques in Nuclear Engineering: Read More [+]

NUC ENG 602 Individual Study for Doctoral Students 1 - 8 Units

Terms offered: Fall 2017, Spring 2017, Fall 2016
Individual study in consultation with the major field adviser, intended to provide an opportunity for qualified students to prepare themselves for the various examinations required of candidates for the Ph.D.

Individual Study for Doctoral Students: Read More [+]

Faculty and Instructors

Faculty

Lee A. Bernstein, Adjunct Professor.

Massimiliano Fratoni, Assistant Professor. Nuclear reactor design, fuel cycle analysis, fusion reactors.
Research Profile

Ehud Greenspan, Professor. Professor of the Graduate School.

Peter Hosemann, Associate Professor. Microscopy, nanomaterials, Nuclear materials, material science, radiation damage, corrosion in liquid metals, materials development, materials under extremes, nuclear applications, ion beam microscopy, nanoscale mechanical testing.
Research Profile

Daniel M. Kammen, Professor. Public policy, nuclear engineering, energy, resources, risk analysis as applied to global warming, methodological studies of forecasting, hazard assessment, renewable energy technologies, environmental resource management.
Research Profile

Ka-Ngo Leung, Professor. Professor of the Graduate School, Plasma and Ion Beam technology in microfabrication processes.

Edward C. Morse, Professor. Applied plasma physics: fusion technology: microwaves, experimental investigation of RF plasma heating, experimental studies of compact toroids spectral method for magnetohydrodynamic stability.
Research Profile

Eric B. Norman, Professor. Professor of the Graduate School, nuclear astrophysics, experimental nuclear physics, homeland security, neutrinos.
Research Profile

Per F. Peterson, Professor. Nuclear engineering, heat and mass transfer, reactor thermal hydraulics, nuclear reactor design, radioactive waste, nuclear materials management.
Research Profile

Rachel Slaybaugh, Assistant Professor. Computational methods, high performance computing, neutron transport.
Research Profile

Karl A. Van Bibber, Professor. Experimental nuclear physics, Particle Astrophysics, Accelerator Technology and Neutron Sources.
Research Profile

Kai Vetter, Professor.

Jasmina L. Vujic, Professor. Nuclear engineering, numerical methods in reactor physics, neutron and photon transport, reactor core design and analysis, shielding, radiation protection, biomedical application of radiation, optimization techniques for vector, parallel computers.
Research Profile

Lecturers

Ralph E. Berger, Lecturer.

Alan Michael Bolind, Lecturer.

Emeritus Faculty

T. Kenneth Fowler, Professor Emeritus. Plasma physics, nuclear engineering, magnetic fusion, confinement and stability of plasmas for thermonuclear fusion, fusion reactor design, spehromak compact toroid plasma confinement configuration.
Research Profile

Lawrence M. Grossman, Professor Emeritus. Nuclear engineering, reactor physics, numerical approximation methods in neutron diffusion, transport theory, control and optimization theory in nuclear reactor engineering.
Research Profile

Selig N. Kaplan, Professor Emeritus. Radiation reactions, interaction of radiation of matter, detection and measurement of ionizing radiation.
Research Profile

William E. Kastenberg, Professor Emeritus. Risk management, risk assessment, nuclear reactor safety, ethical issues in emerging technologies.
Research Profile

Donald R. Olander, Professor Emeritus. Nuclear engineering, nuclear materials: reactor fuel behavior, hydriding of zirconium and uranium, high-temperature kinetic and thermodynamic behavior of nuclear reactor fuels, performance of degraded nuclear fuels.
Research Profile

Contact Information

Department of Nuclear Engineering

4153 Etcheverry Hall

Phone: 510-642-5010

Visit Department Website

Department Chair

Karl van Bibber, PhD

Phone: 510-542-3477

karl.van.bibber@berkeley.edu

Student Services Adviser

Kirsten Wimple Hall

4149 Etcheverry Hall

Phone: 510-642-5760

admissions@berkeley.edu

Back to Top