Mechanical Engineering

University of California, Berkeley

This is an archived copy of the 2016-17 guide. To access the most recent version of the guide, please visit http://guide.berkeley.edu.

About the Program

The Department of Mechanical Engineering offers three graduate degree programs: the Master of Engineering (MEng), the Master of Science (MS), and the Doctor of Philosophy (PhD).

Master of Engineering (MEng)

This accelerated Masters of Engineering Program has been designed in collaboration with several other departments in the College of Engineering for the purpose of developing professional leaders who understand the technical, environmental, economic and social issues involved in Mechanical Engineering. It is supported by the College of Engineering's Coleman Fung Institute for Engineering Leadership. For more information about this interdisciplinary program, please see the Fung Institute Website .

As of fall 2013, there are full-time and part-time options for pursuing this program.

Master of Science (MS)

The majority of students earning a master's degree in our department earn a master of science degree. It can be done in conjunction with a PhD (for the MS/PhD option) or alone, though the vast majority of our students are on the doctoral track. Degrees are granted after completion of programs of study that emphasize the application of the natural sciences to the analysis and solution of engineering problems. Advanced courses in mathematics, chemistry, physics, and the life sciences are normally included in a program that incorporates the engineering systems approach for analysis of problems.

Doctor of Philosophy (PhD)

This degree can be completed in conjunction with a master of science degree or alone. Degrees are granted after completion of programs of study that emphasize the application of the natural sciences to the analysis and solution of engineering problems. Advanced courses in mathematics, chemistry, physics, and the life sciences are normally included in a program that incorporates the engineering systems approach for analysis of problems.

Visit Department Website

Admissions

Admission to the University

Minimum Requirements for Admission

The following minimum requirements apply to all graduate programs and will be verified by the Graduate Division:

  1. A bachelor’s degree or recognized equivalent from an accredited institution;
  2. A grade point average of B or better (3.0);
  3. If the applicant comes from a country or political entity (e.g., Quebec) where English is not the official language, adequate proficiency in English to do graduate work, as evidenced by a TOEFL score of at least 90 on the iBT test, 570 on the paper-and-pencil test, or an IELTS Band score of at least 7 (note that individual programs may set higher levels for any of these); and
  4. Sufficient undergraduate training to do graduate work in the given field.

Applicants Who Already Hold a Graduate Degree

The Graduate Council views academic degrees not as vocational training certificates, but as evidence of broad training in research methods, independent study, and articulation of learning. Therefore, applicants who already have academic graduate degrees should be able to pursue new subject matter at an advanced level without need to enroll in a related or similar graduate program.

Programs may consider students for an additional academic master’s or professional master’s degree only if the additional degree is in a distinctly different field.

Applicants admitted to a doctoral program that requires a master’s degree to be earned at Berkeley as a prerequisite (even though the applicant already has a master’s degree from another institution in the same or a closely allied field of study) will be permitted to undertake the second master’s degree, despite the overlap in field.

The Graduate Division will admit students for a second doctoral degree only if they meet the following guidelines:

  1. Applicants with doctoral degrees may be admitted for an additional doctoral degree only if that degree program is in a general area of knowledge distinctly different from the field in which they earned their original degree. For example, a physics PhD could be admitted to a doctoral degree program in music or history; however, a student with a doctoral degree in mathematics would not be permitted to add a PhD in statistics.
  2. Applicants who hold the PhD degree may be admitted to a professional doctorate or professional master’s degree program if there is no duplication of training involved.

Applicants may apply only to one single degree program or one concurrent degree program per admission cycle.

Required Documents for Applications

  1. Transcripts: Applicants may upload unofficial transcripts with your application for the departmental initial review. If the applicant is admitted, then official transcripts of all college-level work will be required. Official transcripts must be in sealed envelopes as issued by the school(s) attended. If you have attended Berkeley, upload your unofficial transcript with your application for the departmental initial review. If you are admitted, an official transcript with evidence of degree conferral will not be required.
  2. Letters of recommendation: Applicants may request online letters of recommendation through the online application system. Hard copies of recommendation letters must be sent directly to the program, not the Graduate Division.
  3. Evidence of English language proficiency: All applicants from countries or political entities in which the official language is not English are required to submit official evidence of English language proficiency. This applies to applicants from Bangladesh, Burma, Nepal, India, Pakistan, Latin America, the Middle East, the People’s Republic of China, Taiwan, Japan, Korea, Southeast Asia, most European countries, and Quebec (Canada). However, applicants who, at the time of application, have already completed at least one year of full-time academic course work with grades of B or better at a US university may submit an official transcript from the US university to fulfill this requirement. The following courses will not fulfill this requirement:
    • courses in English as a Second Language,
    • courses conducted in a language other than English,
    • courses that will be completed after the application is submitted, and
    • courses of a non-academic nature.

If applicants have previously been denied admission to Berkeley on the basis of their English language proficiency, they must submit new test scores that meet the current minimum from one of the standardized tests.

Where to Apply

Visit the Berkeley Graduate Division application page . 

Doctoral Degree Requirements

Normative Time

Five years or 10 semesters.

Minimum Number of Units to Complete Degree

Thirty-six semester units.

Minimum Units Required in Order to Be Registered Each Semester

As a graduate student in ME, each student must enroll in 15 units each semester.

Maximum Amount of Independent Study Units (298, 299, 300 and Above)

Independent course units are not counted towards the 36 semester units needed to graduate. The maximum of these units you can enroll per semester are listed below.

  • 298s:  8 units
  • 299s:  12 units
  • 300s:  6 units
  • 600s:  8 units

Maximum Number of Courses that Can Be Transferred Towards Degree

Students can transfer up to two courses from another school towards the PhD.

GSI/ME 300-Level Course Requirement

Each student must either serve as a graduate student instructor (GSI) for at least one semester or have taken a 300-level course on teaching.

Minimum Grade Point Averages (GPAs)

All students are required to have the following minimum grade point averages: 

  • 3.5 in Major     
  • 3.0 in Minors

Required Emphases 

Each student must declare one major area as well as two minors. At least one minor is required to be outside of the department. The minor fields are required to broaden the base of the studies and lend support to the major field as well as the dissertation research. 

Required Number of Courses

  • Five courses in your major, all of which must be letter graded.
  • Three courses in your First Outside ME Minor (only 1 of these courses can be taken with the Satisfactory/Unsatisfactory option rather than letter graded).
  • Two courses in your Inside ME or 2nd Outside ME Minor, all of which must be letter graded.
  • Two courses to support your major or one minor.

Please note that 2/3 of the courses counted towards your degree must be letter graded.

Preliminary Examination

This written exam covers undergraduate coursework. All students must pass 3 of the 10 exams. One of these exams must be for the student’s major field area. Students receive two attempts to pass three exams. 

Qualifying Examination

The intent of the qualifying examination is to ascertain the breadth of the student’s comprehension in at least three subject areas related to the major field of study, and to determine whether the student has the ability to think incisively and critically about the theoretical and the practical aspects of these areas. The examination may consider a number of academic points of view and the criteria by which they may be evaluated.

Advancement to Candidacy

All students must complete the advancement to candidacy application directly after passing their qualifying exam. 

PhD Dissertation

Filing your doctoral dissertation at the Graduate Division is one of the final steps leading to the award of your graduate degree. Your manuscript is a scholarly presentation of the results of the research you conducted. Dissertations are required of all students. 

PhD Candidate Seminar

Each student must present their dissertation findings with at least one member of their dissertation committee present. The seminar must take place prior to the end of the semester in which you receive your degree.

For more detailed information, please refer to the following pages:

http://me.berkeley.edu/graduate-student-handbook/chapter-7-phd-doctorate-degree
http://grad.berkeley.edu/policy/degrees-policy/

Master's Degree Requirements (MS)

Plan II

Normative Time

One and a half years or three semesters.

Minimum Number of Units To Complete Degree

Twenty-four semester units.

Course Restriction:  Must be either in 200 series or 100 elective upper division series

Minimum Number of Mechanical Engineering Units

12 Semester Units (must be in 200 series and letter-graded with the exception of the optional 4 units of ME 299 that can be included in the 12).

Minimum Units To Be Registered Each Semester

As a graduate student in ME, each student must enroll in15 Semester units each semester.

Maximum Amount of Independent Study Units (298, 299, 300 And Above)

The semester enrollment restrictions for independent study courses are as follows:

  • 298s: 8 units
  • 299s: 12 units
  • 300s: 6 units

Please note that only 4 semester units of 299 can be counted towards the 24 unit total requirement.

Minimum Required Number of Units in Major Field Area (E.g. Bioeng, Controls, Etc.)

Twelve semester units from 200 or 100 upper division series.

Maximum Number of Units Transferable Towards the Master’s Degree

A master’s student may transfer up to 4 semester units or 6 quarter units of course work completed as a graduate student at another institution.

Advancement To Candidacy

If the MS is the student’s terminal degree, students should apply for advancement to candidacy in their second semester. 

Oral Presentation and Final Report

An oral presentation and a written report are required.  All committee members are required to be members of the Berkeley Division of the Academic Senate.

For more detailed information, please see the following websites:

http://me.berkeley.edu/graduate-student-handbook/chapter-5-ms-master-science-degree
http://grad.berkeley.edu/policy/degrees-policy/

Please note that the requirements above are for the Plan II MS Degree (which the majority of our students choose).  If you are interested in the Plan I requirements, please see http://me.berkeley.edu/graduate-student-handbook/52-master-science-degree-requirements-plan-i . 

Master's Degree Requirements (MEng)

Normative Time

Nine months or two semesters.

Minimum Number of Units to Complete Degree

Twenty-five semester units.
Course restriction:  must be in 200 series.

Minimum Number of Mechanical Engineering Units in Area of Concentration

Twelve semester units (must be in 200 series and letter-graded).

Minimum Grade Point Averages (GPAs)

All students are required to have a minimum overall grade point average of 3.0. 

Minimum Units You Are Required to Take in Order to Be Registered Each Semester

Full time graduate students must enroll in 12 Semester units each semester.

Maximum Number of Units Transferable Towards Master's of Engineering Degree

A master of engineering student may petition to transfer up to 4 semester units or 6 quarter units of 200-level courses completed as a graduate student at another UC campus.

Advancement To Candidacy

Students should apply for advancement to candidacy at the beginning of their second semester. 

Oral Presentation and Report

An oral presentation and a written report of the capstone project are required by the end of the spring semester as part of the completion of the Engineering 296 series.  

Concentrations

  • Advanced Energy Technology
  • Experiential Advanced Control Systems Design
  • Modeling & Simulation of Physical Processes & Systems
  • Product Design
     
Courses Required
Approved individualized study list per student’s interest in concentration area, including the courses below:
ENGIN 271Engineering Leadership I3
ENGIN 272Engineering Leadership II3
ENGIN 296MAMaster of Engineering Capstone Project2
ENGIN 296MBMaster of Engineering Capstone Project3
ENGIN 295Communications for Engineering Leaders ( 1 unit in fall and 1 unit in spring )1
ENGIN 298AGroup Studies or Seminars (optional, in spring)1-6
MEC ENG Electives - approved study list per student’s area of concentration. (Advanced Energy Technology; Experiential Advanced Control Systems Design; Modeling and Simulation of Physical Processes and Systems; Product Design)12

For more detailed information, please refer to the following page:
http://me.berkeley.edu/graduate-student-handbook/62-master-engineering-degree-requirements .
 

Courses

Mechanical Engineering

MEC ENG C200 Design, Evaluate, and Scale Development Technologies 3 Units

Terms offered: Fall 2017, Fall 2016, Fall 2015
This required course for the Designated Emphasis in Development Engineering will include projects and case studies, many related to projects at UC Berkeley, such as those associated with the Development Impact Labs (DIL). Student teams will work with preliminary data to define the problem. They will then collect and analyze interview and survey data from potential users and begin to design a solution. Students will explore how to use novel monitoring technologies and “big data” for product improvement and evaluation. The student teams will use the case studies (with improvements based on user feedback and data analysis) to develop a plan for scaling and evaluation with a rigorous controlled trial.
Design, Evaluate, and Scale Development Technologies: Read More [+]

MEC ENG C201 Modeling and Simulation of Advanced Manufacturing Processes 3 Units

Terms offered: Spring 2018, Spring 2017, Spring 2016
This course provides the student with a modern introduction to the basic industrial practices, modeling techniques, theoretical background, and computational methods to treat classical and cutting edge manufacturing processes in a coherent and self-consistent manner.
Modeling and Simulation of Advanced Manufacturing Processes: Read More [+]

MEC ENG C202 Computational Design of Multifunctional/Multiphysical Composite Materials 3 Units

Terms offered: Spring 2012
The course is self-contained and is designed in an interdisciplinary manner for graduate students in engineering, materials science, physics, and applied mathematics who are interested in methods to accelerate the laboratory analysis and design of new materials. Examples draw primarily from various mechanical, thermal, diffusive, and electromagnetic applications.
Computational Design of Multifunctional/Multiphysical Composite Materials: Read More [+]

MEC ENG 204 Advanced Manufacturing Systems Analysis, AMS 3 Units

Terms offered: Spring 2017, Spring 2016, Spring 2015
This course is designed to prepare students for technical leadership in industry. The objective is to provide insight and understanding on the main concepts and practices involved in analyzing, managing systems to deliver high quality, cost effectiveness and sustainable advantages.

The impact of this class on the Mechanical Engineering program includes delivering core production concepts and advanced skills that blend vision and advanced manufacturing elements. This course is highly recommended for students on the Product Design track in Mechanical Engineering’s Master of Engineering program.

Advanced Manufacturing Systems Analysis, AMS: Read More [+]

MEC ENG C205 Critical Making 4 Units

Terms offered: Spring 2018, Spring 2017, Spring 2016
Critical Making will operationalize and critique the practice of “making” through both foundational literature and hands on studio culture. As hybrid practitioners, students will develop fluency in readily collaging and incorporating a variety of physical materials and protocols into their practice. Students will envision and create future computational experiences that critically explore social and culturally relevant technological themes. No previous technical knowledge is required to take this course. Class projects involve basic programming, electronic circuitry, and digital fabrication design. Tutorials and instruction will be provided, but students will be expected to develop basic skills in these areas to complete course projects.
Critical Making: Read More [+]

MEC ENG 206 Engineering Design and Prototyping: Pedagogy & Assessment 3 Units

Terms offered: Prior to 2007
This course explores contemporary research in engineering design and prototyping, as well as related cognitive issues in engineering curricular development, pedagogy, and assessment. One recurring theme throughout the course will be the duality between learning and design: design-based research, design as a pedagogy for integrative learning and the role of cognition and the learning sciences in the practice of engineering design. It has been motivated by several reforms: (1) National efforts to better train and educate engineers for the engineering workplace in the 21st Century: to better prepare engineers to face multidisciplinary problems and product design in competitive industries and improve their skills in teamwork and communication.
Engineering Design and Prototyping: Pedagogy & Assessment: Read More [+]

MEC ENG C210 Advanced Orthopedic Biomechanics 4 Units

Terms offered: Fall 2017, Fall 2016, Fall 2015
Students will learn the application of engineering concepts including statics, dynamics, optimization theory, composite beam theory, beam-on-elastic foundation theory, Hertz contact theory, and materials behavior. Topics will include forces and moments acting on human joints; composition and mechanical behavior of orthopedic biomaterials; design/analysis of artificial joint, spine, and fracture fixation prostheses; musculoskeletal tissues including bone, cartilage, tendon, ligament, and muscle; osteoporosis and fracture-risk predication of bones; and bone adaptation. Students will be challenged in a MATLAB-based project to integrate the course material in an attempt to gain insight into contemporary design/analysis/problems.
Advanced Orthopedic Biomechanics: Read More [+]

MEC ENG 211 The Cell as a Machine 3 Units

Terms offered: Fall 2015, Fall 2013
This course offers a modular and systems mechanobiology (or "machine") perspective of the cell. Two vitally important components of the cell machinery will be studied in depth: (1) the integrin-mediated focal adhesions system that enables the cell to adhere to, and communicate mechano-chemical signals with, the extracellular environment, and (2) the nuclear pore complex, a multi-protein gateway for traffic in and out of the nucleus that regulates gene expression and affects protein synthesis.
The Cell as a Machine: Read More [+]

MEC ENG C212 Heat and Mass Transport in Biomedical Engineering 3 Units

Terms offered: Spring 2008, Fall 2007, Spring 2006, Spring 2005
Fundamental processes of heat and mass transport in biological systems; organic molecules, cells, biological organs, whole animals. Derivation of mathematical models and discussion of experimental procedures. Applications to biomedical engineering.
Heat and Mass Transport in Biomedical Engineering: Read More [+]

MEC ENG C213 Fluid Mechanics of Biological Systems 3 Units

Terms offered: Spring 2016, Spring 2014, Spring 2011
Fluid mechanical aspects of various physiological systems, the circulatory, respiratory, and renal systems. Motion in large and small blood vessels. Pulsatile and peristaltic flows. Other biofluidmechanical flows: the ear, eye, etc. Instrumentation for fluid measurements in biological systems and for medical diagnosis and applications. Artificial devices for replacement of organs and/or functions, e.g. blood oxygenators, kidney dialysis machines, artificial hearts/circulatory assist devices.
Fluid Mechanics of Biological Systems: Read More [+]

MEC ENG C214 Advanced Tissue Mechanics 3 Units

Terms offered: Spring 2018, Spring 2017, Spring 2015
The goal of this course is to provide a foundation for characterizing and understanding the mechanical behavior of load-bearing tissues. A variety of mechanics topics will be introduced, including anisotropic elasticity and failure, cellular solid theory, biphasic theory, and quasi-linear viscoelasticity (QLV) theory. Building from this theoretical basis, we will explore the constitutive behavior of a wide variety of biological tissues. After taking this course, students should have sufficient background to independently study the mechanical behavior of most biological tissues. Formal discussion section will include a seminar series with external speakers.
Advanced Tissue Mechanics: Read More [+]

MEC ENG C215 Advanced Structural Aspects of Biomaterials 4 Units

Terms offered: Spring 2018, Spring 2016, Fall 2013
This course covers the structure and mechanical functions of load bearing tissues and their replacements. Biocompatibility of biomaterials and host response to structural implants are examined. Quantitative treatment of biomechanical issues and constitutive relationships of materials are covered in order to design implants for structural function. Material selection for load bearing applications including reconstructive surgery, orthopedics, dentistry, and cardiology are addressed.
Advanced Structural Aspects of Biomaterials: Read More [+]

MEC ENG C216 Molecular Biomechanics and Mechanobiology of the Cell 4 Units

Terms offered: Spring 2016, Spring 2015, Spring 2014
This course develops and applies scaling laws and the methods of continuum and statistical mechanics to understand micro- and nano-scale mechanobiological phenomena involved in the living cell with particular attention the nucleus and the cytoskelton as well as the interactions of the cell with the extracellular matrix and how these interactions may cause changes in cell architecture and biology, consequently leading to functional adaptation or pathological conditions.
Molecular Biomechanics and Mechanobiology of the Cell: Read More [+]

MEC ENG C217 Biomimetic Engineering -- Engineering from Biology 3 Units

Terms offered: Fall 2017, Spring 2014, Fall 2010
Study of nature's solutions to specific problems with the aim of determining appropriate engineering analogs. Morphology, scaling, and design in organisms applied to engineering structures. Mechanical principles in nature and their application to engineering devices. Mechanical behavior of biological materials as governed by underlying microstructure, with the potential for synthesis into engineered materials. Trade-offs between redundancy and efficiency. Students will work in teams on projects where they will take examples of designs, concepts, and models from biology and determine their potential in specific engineering applications.
Biomimetic Engineering -- Engineering from Biology: Read More [+]

MEC ENG C218 Introduction to MEMS Design 4 Units

Terms offered: Spring 2018, Spring 2017, Spring 2016
Physics, fabrication, and design of micro-electromechanical systems (MEMS). Micro and nanofabrication processes, including silicon surface and bulk micromachining and non-silicon micromachining. Integration strategies and assembly processes. Microsensor and microactuator devices: electrostatic, piezoresistive, piezoelectric, thermal, magnetic transduction. Electronic position-sensing circuits and electrical and mechanical noise. CAD for MEMS. Design project is required.
Introduction to MEMS Design: Read More [+]

MEC ENG C219 Parametric and Optimal Design of MEMS 3 Units

Terms offered: Spring 2013, Spring 2012, Spring 2011
Parametric design and optimal design of MEMS. Emphasis on design, not fabrication. Analytic solution of MEMS design problems to determine the dimensions of MEMS structures for specified function. Trade-off of various performance requirements despite conflicting design requirements. Structures include flexure systems, accelerometers, and rate sensors.
Parametric and Optimal Design of MEMS: Read More [+]

MEC ENG 220 Precision Manufacturing 3 Units

Terms offered: Fall 2015, Fall 2013, Fall 2012
Introduction to precision engineering for manufacturing. Emphasis on design and performance of precision machinery for manufacturing. Topics include machine tool elements and structure, sources of error (thermal, static, dynamic, process related), precision machining processes and process models (diamond turning and abrasive (fixed and free) processes), sensors for process monitoring and control, metrology, actuators, machine design case studies and examples of precision component manufacture.
Precision Manufacturing: Read More [+]

MEC ENG 221 Graduate Introduction to Lean Manufacturing Systems 3 Units

Terms offered: Spring 2018, Fall 2006, Fall 2004
Fundamentals of lean manufacturing systems including manufacturing fundamentals, unit operations and manufacturing line considerations for work in process (WIP), manufacturing lead time (MLT), economics, quality monitoring; high mix/low volume (HMLV) systems fundamentals including just in time (JIT), kanban, buffers and line balancing; class project/case studies for design and analysis of competitive manufacturing systems.
Graduate Introduction to Lean Manufacturing Systems: Read More [+]

MEC ENG C223 Polymer Engineering 3 Units

Terms offered: Fall 2017, Fall 2015, Fall 2014
A survey of the structure and mechanical properties of advanced engineering polymers. Topics include rubber elasticity, viscoelasticity, mechanical properties, yielding, deformation, and fracture mechanisms of various classes of polymers. The course will discuss degradation schemes of polymers and long-term performance issues. The class will include polymer applications in bioengineering and medicine.
Polymer Engineering: Read More [+]

MEC ENG 224 Mechanical Behavior of Engineering Materials 3 Units

Terms offered: Fall 2016, Fall 2015, Spring 2015
This course covers elastic and plastic deformation under static and dynamic loads. Prediction and prevention of failure by yielding, fracture, fatigue, creep, corrosion, and wear. Basic elasticity and plasticity theories are discussed.
Mechanical Behavior of Engineering Materials: Read More [+]

MEC ENG C225 Deformation and Fracture of Engineering Materials 4 Units

Terms offered: Spring 2018, Spring 2016, Spring 2015
This course covers deformation and fracture behavior of engineering materials for both monotonic and cyclic loading conditions.
Deformation and Fracture of Engineering Materials: Read More [+]

MEC ENG 226 Tribology 3 Units

Terms offered: Fall 2016, Spring 2016, Spring 2013
Surface interactions. Fundamentals of contact mechanics. Friction theories. Types of measurement of wear. Response of materials to surface tractions. Plastic deformation, void/crack nucleation and crack propagation. Delamination wear. Microstructural effects in wear processes. Mechanics of layered media. Solid film and boundary liquid film lubrication. Friction and wear of polymers and fiber-reinforced polymeric composites. Brief introduction to metal cutting and tool wear mechanisms.
Tribology: Read More [+]

MEC ENG 227 Mechanical Behavior of Composite Materials 3 Units

Terms offered: Spring 2013, Fall 2010, Fall 2008
Response of composite materials (fiber and particulate-reinforced materials) to static, cyclic, creep and thermomechanical loading. Manufacturing process-induced variability, and residual stresses. Fatigue behavior,fracture mechanics and damage development. Role of the reinforcement-matrix interface in mechanical behavior. Environmental effects. Dimensional stability and thermal fatigue. Application to polymer, metal, ceramic, and carbon matrix composites.
Mechanical Behavior of Composite Materials: Read More [+]

MEC ENG 229 Design of Basic Electro-Mechanical Devices 3 Units

Terms offered: Spring 2018, Spring 2017, Spring 2015
Fundamental principles of magnetics, electro-magnetics, and magnetic materials as applied to design and operation of electro-mechanical devices. Type of device to be used in a particular application and dimensions of parts for the overall design will be discussed. Typical applications covered will be linear and rotary actuators, stepper motors, AC motors, and DC brush and brushless motors. A design project is required.
Design of Basic Electro-Mechanical Devices: Read More [+]

MEC ENG C231A Experiential Advanced Control Design I 3 Units

Terms offered: Fall 2017, Fall 2016, Fall 2015
Experience-based learning in the design of SISO and MIMO feedback controllers for linear systems. The student will master skills needed to apply linear control design and analysis tools to classical and modern control problems. In particular, the participant will be exposed to and develop expertise in two key control design technologies: frequency-domain control synthesis and time-domain optimization-based approach.
Experiential Advanced Control Design I: Read More [+]

MEC ENG C231B Experiential Advanced Control Design II 3 Units

Terms offered: Spring 2018, Spring 2017
Experience-based learning in the design, analysis, and verification of automatic control systems. The course emphasizes the use of computer-aided design techniques through case studies and design tasks. The student will master skills needed to apply advanced model-based control analysis, design, and estimation to a variety of industrial applications. The role of these specific design methodologies within the larger endeavor of control design is also addressed.
Experiential Advanced Control Design II: Read More [+]

MEC ENG C232 Advanced Control Systems I 3 Units

Terms offered: Fall 2017, Fall 2016, Fall 2015
Input-output and state space representation of linear continuous and discrete time dynamic systems. Controllability, observability, and stability. Modeling and identification. Design and analysis of single and multi-variable feedback control systems in transform and time domain. State observer. Feedforward/preview control. Application to engineering systems.
Advanced Control Systems I: Read More [+]

MEC ENG 233 Advanced Control Systems II 3 Units

Terms offered: Spring 2018, Spring 2017, Spring 2016
Linear Quadratic Optimal Control, Stochastic State Estimation, Linear Quadratic Gaussian Problem, Loop Transfer Recovery, Adaptive Control and Model Reference Adaptive Systems, Self Tuning Regulators, Repetitive Control, Application to engineering systems.
Advanced Control Systems II: Read More [+]

MEC ENG 234 Multivariable Control System Design 3 Units

Terms offered: Fall 2016, Spring 2015, Spring 2011
Analysis and synthesis techniques for multi-input (MIMO) control systems. Emphasis is on the effect that model uncertainty has on the design process.
Multivariable Control System Design: Read More [+]

MEC ENG 235 Design of Microprocessor-Based Mechanical Systems 4 Units

Terms offered: Spring 2018, Spring 2017, Spring 2016
This course provides preparation for the conceptual design and prototyping of mechanical systems that use microprocessors to control machine activities, acquire and analyze data, and interact with operators. The architecture of microprocessors is related to problems in mechanical systems through study of systems, including electro-mechanical components, thermal components, and a variety of instruments. Laboratory exercises lead through studies of different levels of software.
Design of Microprocessor-Based Mechanical Systems: Read More [+]

MEC ENG C236 Control and Optimization of Distributed Parameters Systems 3 Units

Terms offered: Fall 2017, Spring 2016, Spring 2015, Spring 2014
Distributed systems and PDE models of physical phenomena (propagation of waves, network traffic, water distribution, fluid mechanics, electromagnetism, blood vessels, beams, road pavement, structures, etc.). Fundamental solution methods for PDEs: separation of variables, self-similar solutions, characteristics, numerical methods, spectral methods. Stability analysis. Adjoint-based optimization. Lyapunov stabilization. Differential flatness. Viability control. Hamilton-Jacobi-based control.
Control and Optimization of Distributed Parameters Systems: Read More [+]

MEC ENG 237 Control of Nonlinear Dynamic Systems 3 Units

Terms offered: Spring 2016, Spring 2015, Fall 2013
Fundamental properties of nonlinear systems. Stability of nonlinear systems via Lyapunov’s Direct Method. Controllability and observability of nonlinear systems. Controller design of nonlinear systems including feedback linearization and sliding mode control. Design of nonlinear discrete and adaptive controllers. Nonlinear observers and compensators.
Control of Nonlinear Dynamic Systems: Read More [+]

MEC ENG C237 Nonlinear Systems 3 Units

Terms offered: Spring 2018
Basic graduate course in nonlinear systems. Nonlinear phenomena, planar systems, bifurcations, center manifolds, existence and uniqueness theorems. Lyapunov’s direct and indirect methods, Lyapunov-based feedback stabilization. Input-to-state and input-output stability, and dissipativity theory. Computation techniques for nonlinear system analysis and design. Feedback linearization and sliding mode control methods.
Nonlinear Systems: Read More [+]

MEC ENG 238 Advanced Micro/Nano Mechanical Systems Laboratory 3 Units

Terms offered: Spring 2018, Spring 2013
This hands-on laboratory course focuses on the mechanical engineering principles that underlie the design, fabricaton, and operation of micro/nanoscale mechanical systems, including devices made by nanowire/nanotube syntheses; photolithography/soft lithography; and molding processes. Each laboratory will have different focuses for basic understanding of MEMS/NEMS systems from prototype constructions to experimental testings using mechanical, electrical, or optical techniques.
Advanced Micro/Nano Mechanical Systems Laboratory: Read More [+]

MEC ENG 239 Advanced Design and Automation 4 Units

Terms offered: Fall 2014, Spring 2013, Spring 2011
This course will provide students with a solid understanding of smart products and the use of embedded microcomputers in products and machines. The course has two components: 1.) Formal lectures. Students receive a set of formal lectures on the design of smart machines and products that use embedded microcomputers. The materials cover machine components, actuators, sensors, basic electronic devices, embedded microprocessor systems and control, power transfer components, and mechanism design. 2.) Projects. Students will design and construct prototype products that use embedded microcomputers.
Advanced Design and Automation: Read More [+]

MEC ENG 240A Advanced Marine Structures I 3 Units

Terms offered: Fall 2013, Spring 2013, Spring 2012
This course introduces a probabilistic description of ocean waves and wave loads acting on marine structures. These topics are followed with discussion of structural strength and reliability analysis.
Advanced Marine Structures I: Read More [+]

MEC ENG 240B Advanced Marine Structures II 3 Units

Terms offered: Spring 2015, Fall 2014, Spring 2014
This course is concerned with the structural response of marine structures to environmental loads. Overall response of the structure as well as the behavior of its members under lateral and compressive loads are discussed.
Advanced Marine Structures II: Read More [+]

MEC ENG 241A Marine Hydrodynamics I 3 Units

Terms offered: Fall 2016, Fall 2015, Spring 2014
Navier-Stokes Equations. Boundary-layer theory, laminar, and turbulent. Frictional resistance. Boundary layer over water surface. Separated flow modeling. Steady and unsteady flow. Momentum theorems. Three-dimensional water-wave theory. Formulation of wave resistance of ships. Michell's solution. Wave patterns. Applications.
Marine Hydrodynamics I: Read More [+]

MEC ENG 241B Marine Hydrodynamics II 3 Units

Terms offered: Spring 2018, Spring 2017, Spring 2016
Momentum analysis for bodies moving in a fluid. Added-mass theory. Matched asymptotic slender-body theory. Small bodies in a current. Theory of motion of floating bodies with and without forward speed. Radiation and diffraction potentials. Wave forces. Hydro-elasticity formulation. Ocean-wave energy. Memory effects in time domain. Second-order formulation. Impact hydrodynamics, Hydrofoil theory and lifting surface.
Marine Hydrodynamics II: Read More [+]

MEC ENG 243 Advanced Methods in Free-Surface Flows 3 Units

Terms offered: Spring 2016, Fall 2012, Spring 2009
Analytical and numerical methods in free-surface problems. Elements of inviscid external lifting and nonlifting flows. Analytical solutions in special coordinates systems. Integral-equation methods: formulations and implementations. Multiple-bodies interaction problems. Free-surface Green functions in two and three dimensions. Hybrid integral-equation methods. Finite-element formulations. Variational forms in time-harmonic flows. Finite-difference forms, stability, and accuracy. Boundary-fitted coordinates methods. Unsteady linearized wave-body interaction in time domain. Nonlinear breaking waves calculations. Particle dynamics. Extensive hands-on experience of microcomputers and/or workstations in developing solution.
Advanced Methods in Free-Surface Flows: Read More [+]

MEC ENG 245 Oceanic and Atmospheric Waves 3 Units

Terms offered: Spring 2018, Spring 2016, Spring 2015
Covers dynamics of wave propagation in the ocean and the atmosphere. Specifically, formulation and properties of waves over the surface of a homogenous fluid, interfacial waves in a two-/multi-layer density stratified fluid, and internal waves in a continuous stratification will be discussed.
Oceanic and Atmospheric Waves: Read More [+]

MEC ENG 246 Advanced Energy Conversion Principles 3 Units

Terms offered: Spring 2018, Fall 2016, Spring 2016
Covers the fundamental principles of energy conversion processes, followed by development of theoretical and computational tools that can be used to analyze energy conversion processes. Also introduces the use of modern computational methods to model energy conversion performance characteristics of devices and systems. Performance features, sources of inefficiencies, and optimal design strategies are explored for a variety of applications.
Advanced Energy Conversion Principles: Read More [+]

MEC ENG 251 Heat Conduction 3 Units

Terms offered: Spring 2018, Fall 2016, Fall 2015
Analytical and numerical methods for the determination of the conduction of heat in solids.
Heat Conduction: Read More [+]

MEC ENG 252 Heat Convection 3 Units

Terms offered: Spring 2017, Spring 2015, Spring 2014
The transport of heat in fluids in motion; free and forced convection in laminar and turbulent flow over surfaces and within ducts.
Heat Convection: Read More [+]

MEC ENG 253 Thermal Radiation 3 Units

Terms offered: Spring 2018, Fall 2015, Fall 2013
Thermal radiation properties of gases, liquids, and solids; the calculation of radiant energy transfer.
Thermal Radiation: Read More [+]

MEC ENG 254 Thermodynamics I 3 Units

Terms offered: Spring 2018, Fall 2016, Fall 2015
Axiomatic formulation of macroscopic equilibrium thermodynamics. Quantum mechanical description of atomic and molecular structure. Statistical-mechanical evaluation of thermodynamic properties of gases, liquids, and solids. Elementary kinetic theory of gases and evaluation of transport properties.
Thermodynamics I: Read More [+]

MEC ENG 255 Advanced Combustion Processes 3 Units

Terms offered: Fall 2016, Fall 2015, Fall 2014
Fundamentals of combustion, flame structure, flame speed, flammability, ignition, stirred reaction, kinetics and nonequilibrium processes, pollutant formation. Application to engines, energy production, and fire safety.
Advanced Combustion Processes: Read More [+]

MEC ENG 256 Combustion 3 Units

Terms offered: Fall 2017, Spring 2015, Spring 2014
Combustion modeling. Multicomponent conservation equations with reactions. Laminar and turbulent deflagrations. Rankine-Hugoniot relations. Diffusion flames. Boundary layer combustion, ignition, and stability.
Combustion: Read More [+]

MEC ENG 257 Advanced Combustion 3 Units

Terms offered: Fall 2016, Fall 2014, Fall 2012
Critical analyses of combustion phenomenon. Conservation relations applied to reacting systems. Reactions are treated by both asymptotic and numerical methods. Real hydrocarbon kinetics are used; where available reduced kinetic mechanics are introduced. Flame propagation theory and experiments are discussed in detail for both laminar and turbulent flows.
Advanced Combustion: Read More [+]

MEC ENG 258 Heat Transfer with Phase Change 3 Units

Terms offered: Spring 2016, Spring 2015, Fall 2013
Heat transfer associated with phase change processes. Topics include thermodynamics of phase change, evaporation, condensation, nucleation and bubble growth, two phase flow, convective boiling and condensation, melting and solidification.
Heat Transfer with Phase Change: Read More [+]

MEC ENG 259 Microscale Thermophysics and Heat Transfer 3 Units

Terms offered: Fall 2017, Spring 2016, Spring 2014
This course introduces advanced statistical thermodynamics, nonequilibrium thermodynamics, and kinetic theory concepts used to analyze thermophysics of microscale systems and explores applications in which microscale transport plays an important role.
Microscale Thermophysics and Heat Transfer: Read More [+]

MEC ENG 260A Advanced Fluid Mechanics I 3 Units

Terms offered: Fall 2017, Fall 2016, Fall 2015
Introduces the foundations of fluid mechanics. Exact flow solutions are used to develop a physical insight of the fluid flow phenomena. Rigorous derivation of the equations of motion. Incompressible and compressible potential flows. Canonical viscous flows.
Advanced Fluid Mechanics I: Read More [+]

MEC ENG 260B Advanced Fluid Mechanics II 3 Units

Terms offered: Spring 2018, Spring 2017, Spring 2016
Develops a working knowledge of fluid mechanics by identifying the essential physical mechanism in complex canonical flow problems which leads to simplified yet accurate formulation. Boundary layers, creeping flows, rotational flows, rotating flows. Stability and transition, introduction to turbulence.
Advanced Fluid Mechanics II: Read More [+]

MEC ENG 262 Hydrodynamic Stability and Instability 3 Units

Terms offered: Fall 2014, Fall 2012, Spring 2011
Discussions of linear and nonlinear instabilities in a variety of fluid flows: thermal convection, Rayleigh-Taylor flows, shearing flows, circular and cylindrical Couette flows (i.e., centrifugal instability). Use of the Landau equation, bifurcation diagrams, and energy methods for nonlinear flows.
Hydrodynamic Stability and Instability: Read More [+]

MEC ENG 263 Turbulence 3 Units

Terms offered: Spring 2017, Fall 2012, Spring 2010
Physics of turbulence: Summary of stability and transition. Description of turbulence phenomena. Tools for studying turbulence. Homogeneous turbulence, shear turbulence, rotating turbulence. Summary of engineering models. Discussion of recent advances.
Turbulence: Read More [+]

MEC ENG 266 Geophysical and Astrophysical Fluid Dynamics 3 Units

Terms offered: Spring 2015, Spring 2013, Spring 2008
This course examines high-Reynolds number flows, including their stability, their waves, and the influence of rotating and stratification as applied to geophysical and astrophysical fluid dynamics as well as to engineering flows. Examples of problems studies include vortex dynamics in planetary atmospheres and protoplanetary disks, jet streams, and waves (Rossby, Poincare, inertial, internal gravity, and Kelvin) in the ocean and atmosphere.
Geophysical and Astrophysical Fluid Dynamics: Read More [+]

MEC ENG C268 Physicochemical Hydrodynamics 3 Units

Terms offered: Spring 2017, Fall 2013, Fall 2011, Spring 2011
An introduction to the hydrodynamics of capillarity and wetting. Balance laws and short-range forces. Dimensionless numbers, scaling and lubrication approximation. Rayleigh instability. Marangoni effect. The moving contact line. Wetting and short-range forces. The dynamic contact angle. Dewetting. Coating flows. Effect of surfactants and electric fields. Wetting of rough or porous surfaces. Contact angles for evaporating systems.
Physicochemical Hydrodynamics: Read More [+]

MEC ENG 273 Oscillations in Linear Systems 3 Units

Terms offered: Fall 2017, Fall 2016, Fall 2015
Response of discrete and continuous dynamical systems, damped and undamped, to harmonic and general time-dependent loading. Convolution integrals and Fourier and Laplace transform methods. Lagrange’s equations; eigensolutions; orthogonality; generalized coordinates; nonreciprocal and degenerate systems; Rayleigh’s quotient.
Oscillations in Linear Systems: Read More [+]

MEC ENG 274 Random Oscillations of Mechanical Systems 3 Units

Terms offered: Spring 2018, Spring 2015, Spring 2011
Random variables and random processes. Stationary, nonstationary, and ergodic proceses. Analysis of linear and nonlinear, discrete and continuous, mechanical systems under stationary and nonstationary excitations. Vehicle dynamics. Applications to failure analysis. Stochastic estimation and control and their applications to vibratory systems.
Random Oscillations of Mechanical Systems: Read More [+]

MEC ENG 275 Advanced Dynamics 3 Units

Terms offered: Spring 2017, Spring 2015, Spring 2012
Review of Lagrangian dynamics. Legendre transform and Hamilton's equations, Cyclic coordinates, Canonical transformations, Hamilton-Jacobi theory, integrability. Dynamics of asymmetric systems. Approximation theory. Current topics in analytical dynamics.
Advanced Dynamics: Read More [+]

MEC ENG 277 Oscillations in Nonlinear Systems 3 Units

Terms offered: Spring 2016, Spring 2014, Spring 2012
Oscillations in nonlinear systems having one or two degrees of freedom. Qualitative and quantitative methods: graphical, iteration, perturbation, and asymptotic methods. Self-excited oscillations, limit cycles, and domains of attraction.
Oscillations in Nonlinear Systems: Read More [+]

MEC ENG C278 Adv Designing for the Human Body 3 Units

Terms offered: Fall 2017
The course provides project-based learning experience in understanding product design, with a focus on the human body as a mechanical machine. Students will learn the design of external devices used to aid or protect the body. Topics will include forces acting on internal materials (e.g., muscles and total replacement devices), forces acting on external materials (e.g., prothetics and crash pads), design/analysis of devices aimed to improve or fix the human body, muscle adaptation, and soft tissue injury. Weekly laboratory projects will incorporate EMG sensing, force plate analysis, and interpretation of data collection (e.g., MATLAB analysis) to integrate course material to better understand contemporary design/analysis/problems.
Adv Designing for the Human Body: Read More [+]

MEC ENG C279 Introduction to Statistical Mechanics for Engineers 3 Units

Terms offered: Spring 2017, Fall 2013, Fall 2012
Introduction to statistical mechanics for engineers. Basics of ensembles, phase spaces, partitions functions, and free energies. Analysis of expectation values and fluctuations in system properties. Applications to the study of elementary gases, phonons in solids, polymer chains and networks, harmonic and quasi-harmonic crystalline solids; limitations of classical methods and quantum mechanical influences; molecular dynamics simulations for solids.
Introduction to Statistical Mechanics for Engineers: Read More [+]

MEC ENG 280A Introduction to the Finite Element Method 3 Units

Terms offered: Fall 2017, Fall 2016, Fall 2015
Weighted-residual and variational methods of approximation. Canonical construction of finite element spaces. Formulation of element and global state equations. Applications to linear partial differential equations of interest in engineering and applied science.
Introduction to the Finite Element Method: Read More [+]

MEC ENG 280B Finite Element Methods in Nonlinear Continua 3 Units

Terms offered: Spring 2016, Spring 2013, Spring 2009
A brief review of continuum mechanics. Consistent linearization of kinematical variables and balance laws. Incremental formulations of the equations of motion. Solution of the nonlinear field equations by Newton's method and its variants. General treatment of constraints. Applications to nonlinear material and kinematical modeling on continua.
Finite Element Methods in Nonlinear Continua: Read More [+]

MEC ENG 281 Methods of Tensor Calculus and Differential Geometry 3 Units

Terms offered: Fall 2017, Fall 2015, Spring 2012
Methods of tensor calculus and classical differential geometry. The tensor concept and the calculus of tensors, the Riemann-Christoffel tensor and its properties, Riemannian and Euclidean spaces. Geometry of a surface, formulas of Weingarten, and equations of Gauss and Codazzi.
Methods of Tensor Calculus and Differential Geometry: Read More [+]

MEC ENG 282 Theory of Elasticity 3 Units

Terms offered: Spring 2018, Spring 2016, Fall 2014
Fundamentals and general theorems of the linear theory of elasticity (in three dimensions) and the formulation of static and dynamic boundary value problems. Application to torsion, flexure, and two-dimensional problems of plane strain, generalized plane stress, and bending of plates. Representation of basic field equations in terms of displacement potentials and stress functions. Some basic three-dimensional solutions.
Theory of Elasticity: Read More [+]

MEC ENG 283 Wave Propagation in Elastic Media 3 Units

Terms offered: Fall 2013, Fall 2012, Fall 2009
Propagation of mechanical disturbances in unbounded and bounded media. Surface waves, wave reflection and transmission at interfaces and boundaries. Stress waves due to periodic and transient sources. Some additional topics may vary with instructor.
Wave Propagation in Elastic Media: Read More [+]

MEC ENG 284 Nonlinear Theory of Elasticity 3 Units

Terms offered: Spring 2017, Spring 2014, Spring 2013
Fundamentals of the nonlinear theory of elasticity. Material symmetry. Exact solutions in elastostatics. Internal constraints. Useful strain-energy functions. Uniqueness. Compatibility conditions. Volterra dislocations. The Eshelby tensor. Small deformations superposed on finite deformations. Waves in pre-stressed solids. Stability. Bifurcations and buckling. Acceleration waves. Entropic elasticity.
Nonlinear Theory of Elasticity: Read More [+]

MEC ENG 285A Foundations of the Theory of Continuous Media 3 Units

Terms offered: Spring 2018, Spring 2016, Spring 2015
A general development of thermodynamics of deformable media, entropy production, and related entropy inequalities. Thermomechanical response of dissipative media, including those for viscous fluids and nonlinear elastic solids. A discussion of invariance, internal constraints, material symmetry, and other special topics.
Foundations of the Theory of Continuous Media: Read More [+]

MEC ENG 285B Surfaces of Discontinuity and Inhomogeneities in Deformable Continua 3 Units

Terms offered: Fall 2011, Spring 2010, Fall 2008
Finitely deforming thermo-mechanical media. Moving surfaces of discontinuity. Shock waves and acceleration waves in elastic materials. The Eshelby tensor and Eshelbian mechanics. Fracture. Microstructured continua.
Surfaces of Discontinuity and Inhomogeneities in Deformable Continua: Read More [+]

MEC ENG 285C Electrodynamics of Continuous Media 3 Units

Terms offered: Spring 2015, Spring 2013, Spring 2010
This course presents the fundamentals of electromagnetic interactions in deformable continuous media. It develops the background necessary to understand various modern technologies involving MEMS devices, sensors and actuators, plasmas, and a wide range of additional phenomena. The emphasis of this course is on fundamentals, beginning with Maxwell's equations in vacuum, the ether relations and their extension to electromagnetic interactions in materials. The treatment is general within the limits of nonrelativistic physics and accommodates coupling with mechanical and thermal effects. The topics discussed are all developed at a general level including the effects of finite deformations. Various linear models, which are especially useful in applications, are developed through specialization of general theory. This course will be of interest to students in engineering, physics, and applied mathematics.
Electrodynamics of Continuous Media: Read More [+]

MEC ENG 285D Engineering Rheology 3 Units

Terms offered: Spring 2016, Spring 2014
Rheology is the study of the interaction between forces and the flow/deformation of materials. It deals with aspects of the mechanics of materials that are not covered in the standard curriculum, such as the response of viscoelastic fluids and solids, together with methods for modeling and simulating their response. Such materials exhibit a host of counterintuitive phenomena that call for nonlinear modeling and a close interaction between theory and experiment. This is a special-topics course for graduate students seeking advanced knowledge of these phenomena and associated modeling.
Engineering Rheology: Read More [+]

MEC ENG C285E Mechanics and Physics of Lipid Bilayers 3 Units

Terms offered: Fall 2017
Lipid bilayers constitute the membrane that encloses every animal cell and many of its interior structures, including the nuclear envelope, the organelles and the endoplasmic reticulum. This is a unique course devoted to modern developments in this exceptionally active field of research, ranging from models based on continuum theory to recent developments based on statistical mechanics.
Mechanics and Physics of Lipid Bilayers: Read More [+]

MEC ENG 286 Theory of Plasticity 3 Units

Terms offered: Spring 2015, Spring 2013, Spring 2010
Formulation of the theory of plasticity relative to loading surfaces in both strain space and stress space and associated loading criteria. Nonlinear constitutive equations for finitely deformed elastic-plastic materials. Discussion of strain-hardening and special cases. Applications.
Theory of Plasticity: Read More [+]

MEC ENG 288 Theory of Elastic Stability 3 Units

Terms offered: Spring 2009, Fall 2007, Fall 1999
Dynamic stability of elastic bodies. Small motion on finite deformation. Classical treatments of buckling problems. Snapthrough and other global stability problems. Stability theory based upon nonlinear three-dimensional theory of elasticity.
Theory of Elastic Stability: Read More [+]

MEC ENG 289 Theory of Shells 3 Units

Terms offered: Spring 2017, Spring 2012, Fall 2007
A direct formulation of a general theory of shells and plates based on the concept of Cosserat (or Directed) surfaces. Nonlinear constitutive equations for finitely deformed elastic shells. Linear theory and a special nonlinear theory with small strain accompanied by large or moderately large rotation. Applications.
Theory of Shells: Read More [+]

MEC ENG 290C Topics in Fluid Mechanics 3 Units

Terms offered: Spring 2015, Fall 2010, Fall 2003
Lectures on special topics which will be announced at the beginning of each semester that the course is offered. Topics may include transport and mixing, geophysical fluid dynamics, biofluid dynamics, oceanography, free surface flows, non-Newtonian fluid mechanics, among other possibilities.
Topics in Fluid Mechanics: Read More [+]

MEC ENG 290D Solid Modeling and CAD/CAM Fundamentals 3 Units

Terms offered: Fall 2016, Fall 2014, Spring 2008
Graduate survey of solid modeling research. Representations and algorithms for 3D solid geometry. Applications in design, analysis, planning, and manufacturing of mechanical parts, including CAD/CAM, reverse engineering, robotics, mold-making, and rapid prototyping.
Solid Modeling and CAD/CAM Fundamentals: Read More [+]

MEC ENG 290G Laser Processing and Diagnostics 3 Units

Terms offered: Spring 2018, Fall 2015, Spring 2013
The course provides a detailed account of laser interactions with materials in the context of advanced materials processing and diagnostics.
Laser Processing and Diagnostics: Read More [+]

MEC ENG 290H Green Product Development: Design for Sustainability 3 Units

Terms offered: Spring 2017, Spring 2013, Spring 2011
The focus of the course is management of innovation processes for sustainable products, from product definition to sustainable manufacturing and financial models. Using a project in which students will be asked to design and develop a product or service focused on sustainability, we will teach processes for collecting customer and user needs data, prioritizing that data, developing a product specification, sketching and building product prototypes, and interacting with the customer/community during product development. The course is intended as a very hands-on experience in the "green" product development process. The course will be a Management of Technology course offered jointly with the College of Engineering and the Haas School of Business. In addition, it will also receive credit towards the new Certificate on Engineering Sustainability and Environmental Management program. We aim to have half MBA students and half Engineering students (with a few other students, such as from the School of Information) in the class. The instructors will facilitate students to form mixed disciplinary reams for the development of their "green" products.
Green Product Development: Design for Sustainability: Read More [+]

MEC ENG 290I Sustainable Manufacturing 3 Units

Terms offered: Spring 2016, Spring 2015, Spring 2014
Sustainable design, manufacturing, and management as exercised by the enterprise is a poorly understood idea and one that is not intuitively connected to business value or engineering practice. This is especially true for the manufacturing aspects of most enterprises (tools, processes, and systems). This course will provide the basis for understanding (1) what comprises sustainable practices in for-profit enterprises, (2) how to practice and measure continuous improvement using sustainability thinking, techniques, and tools for product and manufacturing process design, and (3) the techniques for and value of effective communication of sustainablilty performance to internal and external audiences. Material in the course will be supplemented by speakers with diverse backgrounds in corporate sustainability, environmental consulting, non-governmental organizations, and academia.
Sustainable Manufacturing: Read More [+]

MEC ENG 290J Predictive Control for Linear and Hybrid Systems 3 Units

Terms offered: Spring 2016, Fall 2014, Spring 2013
Advanced optimization, polyhedra manipulation, and multiparametric programming. Invariant set theory. Analysis and design of constrained predictive controllers for linear and nonlinear systems. Computational oriented models of hybrid systems. Analysis and design of constrained predictive controllers for hybrid systems.
Predictive Control for Linear and Hybrid Systems: Read More [+]

MEC ENG 290KA Innovation through Design Thinking 2 Units

Terms offered: Fall 2017, Fall 2016, Fall 2015
Designed for professionally-oriented graduate students, this course explores key concepts in design innovation based on the human-centered design approach called “design thinking.” Topics covered include human-centered design research, analysis of research to develop design principles, creativity techniques, user needs framing and strategic business modeling.
Innovation through Design Thinking: Read More [+]

MEC ENG 290KB Life Cycle Thinking in Engineering Design 1 Unit

Terms offered: Fall 2017, Fall 2016, Fall 2015
How do we design and manufacture greener products, and how do we know if they really are? This class both provides tools for sustainable design innovation and metrics to measure success. Students will use both creative and analytical skills, generating new ideas as well as evaluating designs with screening-level life cycle assessment.
Life Cycle Thinking in Engineering Design: Read More [+]

MEC ENG 290L Introduction to Nano-Biology 3 Units

Terms offered: Spring 2017, Spring 2016, Fall 2013
This course introduces graduate students in Mechanical Engineering to the nascent field of Nano-Biology. The course is comprised of both formal lectures and projects. Lectures will include an introduction to both molecular biology (components of cells, protein structure and function, DNA, gene regulation, etc.) and nanotechnology ("bottom up" and "top down" nanotechnologies), an overview of current instrumentation in biology, an in-depth description of the recent integration of molecular biology with nanotechnology (for sensing or labeling purposes, elucidating information on cells, etc.), and an introduction to Systems Biology (design principles of biological circuits).
Introduction to Nano-Biology: Read More [+]

MEC ENG 290M Expert Systems in Mechanical Engineering 3 Units

Terms offered: Fall 2005, Fall 2003, Spring 1999
Introduction to artificial intelligence and decision analysis in mechanical engineering. Fundamentals of analytic design, probability theory, failure analysis, risk assessment, and Bayesian and logical inference. Applications to expert systems in probabilistic mechanical engineering design and failure diagnostics. Use of automated influence diagrams to codify expert knowledge and to evaluate optimal design decisions.
Expert Systems in Mechanical Engineering: Read More [+]

MEC ENG 290N System Identification 3 Units

Terms offered: Fall 2010, Fall 2008, Spring 2007
This course is intended to provide a comprehensive treatment of both classical system identification and recent work in control-oriented system identification. Numerical, practical, and theoretical aspects will be covered. Topics treated include time and frequency domain methods, generalized parameter estimation, identification of structured non-linear systems, modeling uncertainty bounding, and state-space methods.
System Identification: Read More [+]

MEC ENG 290P New Product Development: Design Theory and Methods 3 Units

Terms offered: Fall 2015, Fall 2013, Fall 2012
This course is aimed at developing the interdisciplinary skills required for successful product development in today's competitive marketplace. We expect students to be disciplinary experts in their own field (e.g., engineering, business). By bringing together multiple perspectives, we will learn how product development teams can focus their efforts to quickly create cost-effective products that exceed customers' expectations.
New Product Development: Design Theory and Methods: Read More [+]

MEC ENG 290Q Dynamic Control of Robotic Manipulators 3 Units

Terms offered: Fall 2008, Spring 2007, Fall 2001
Dynamic and kinematic analysis of robotic manipulators. Sensors (position, velocity, force and vision). Actuators and power transmission lines. Direct drive and indirect drive. Point to point control. Straight and curved path following. Industrial practice in servo control. Applications of optimal linear quadratic control, preview control, nonlinear control, and direct/indirect adaptive controls. Force control and compliance control. Collision avoidance. Utilization of dynamic controls
Dynamic Control of Robotic Manipulators: Read More [+]

MEC ENG 290R Topics in Manufacturing 3 Units

Terms offered: Fall 2017, Spring 2016, Fall 2014
Advanced topics in manufacturing research. Topics vary from year to year.
Topics in Manufacturing: Read More [+]

MEC ENG 290T Plasmonic Materials 3 Units

Terms offered: Fall 2017, Fall 2014, Spring 2013
This course deals with fundamental aspects of plasmonic materials. The electromagnetic responses of those artificially constructed materials will be discussed. Physics of surface plasmons and dispersion engineering will be introduced. Resonant phenomena associated with the negative permittivity and permeability and the left-handed propagation will be presented. Methods of design, fabrication, and characterization of plasmonic materials will be discussed.
Plasmonic Materials: Read More [+]

MEC ENG 290U Interactive Device Design 4 Units

Terms offered: Fall 2017, Fall 2016, Fall 2015
This course teaches concepts and skills required to design, prototype, and fabricate interactive devices -- that is, physical objects that intelligently respond to user input and enable new types of interactions.
Interactive Device Design: Read More [+]

MEC ENG 290V Topics in Energy, Climate, and Sustainability 1 Unit

Terms offered: Prior to 2007
Weekly lecture series featuring guest speakers from academia, industry, government, and civil society. Speakers will address cutting-edge topics involving novel technologies in energy and climate; the production, consumption, and economic exchange of energy resources and commodities; and energy and climate policy. Undergraduate and graduate students welcome.
Topics in Energy, Climate, and Sustainability: Read More [+]

MEC ENG C290S Hybrid Systems and Intelligent Control 3 Units

Terms offered: Spring 2018, Spring 2016, Spring 2014
Analysis of hybrid systems formed by the interaction of continuous time dynamics and discrete-event controllers. Discrete-event systems models and language descriptions. Finite-state machines and automata. Model verification and control of hybrid systems. Signal-to-symbol conversion and logic controllers. Adaptive, neural, and fuzzy-control systems. Applications to robotics and Intelligent Vehicle and Highway Systems (IVHS).
Hybrid Systems and Intelligent Control: Read More [+]

MEC ENG C290X Advanced Technical Communication: Proposals, Patents, and Presentations 3 Units

Terms offered: Spring 2018, Spring 2016, Spring 2012, Spring 2011
This course will help the advanced Ph.D. student further develop critically important technical communication traits via a series of lectures, interactive workshops, and student projects that will address the structure and creation of effective research papers, technical reports, patents, proposals, business plans, and oral presentations. One key concept will be the emphasis on focus and clarity--achieved through critical thinking regarding objectives and context. Examples will be drawn primarily from health care and bioengineering multidisciplinary applications.
Advanced Technical Communication: Proposals, Patents, and Presentations: Read More [+]

MEC ENG 292A Advanced Special Topics in Bioengineering 1 - 4 Units

Terms offered: Fall 2017, Spring 2017, Spring 2015
This 292 series covers current topics of research interest in bioengineering and biomechanics. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in Bioengineering: Read More [+]

MEC ENG 292B Advanced Special Topics in Controls 1 - 4 Units

Terms offered: Spring 2018, Fall 2017, Spring 2017
This series covers current topics of research interest in controls. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in Controls: Read More [+]

MEC ENG 292C Advanced Special Topics in Design 1 - 4 Units

Terms offered: Spring 2018, Fall 2017, Fall 2016
This series covers current topics of research interest in design. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in Design: Read More [+]

MEC ENG 292D Advanced Special Topics in Dynamics 1 - 4 Units

Terms offered: Prior to 2007
This series covers current topics of research interest in dynamics. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in Dynamics: Read More [+]

MEC ENG 292E Advanced Special Topics in Energy Science and Technology 1 - 4 Units

Terms offered: Fall 2017, Spring 2017
This 292 series covers current topics of research interest in energy science and technology. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in Energy Science and Technology: Read More [+]

MEC ENG 292F Advanced Special Topics in Fluids 1 - 4 Units

Terms offered: Prior to 2007
This 292 series covers current topics of research interest in fluids. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in Fluids: Read More [+]

MEC ENG 292G Advanced Special Topics in Manufacturing 1 - 4 Units

Terms offered: Prior to 2007
This 292 series covers current topics of research interest in manufacturing. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in Manufacturing: Read More [+]

MEC ENG 292H Advanced Special Topics in Materials 1 - 4 Units

Terms offered: Prior to 2007
This 292 series covers current topics of research interest in materials. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in Materials: Read More [+]

MEC ENG 292I Advanced Special Topics in Mechanics 1 - 4 Units

Terms offered: Prior to 2007
This series covers current topics of research interest in mechanics. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in Mechanics: Read More [+]

MEC ENG 292J Advanced Special Topics in MEMS/Nano 1 - 4 Units

Terms offered: Spring 2018
This 292 series covers current topics of research interest in MEMS/nano. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in MEMS/Nano: Read More [+]

MEC ENG 292K Advanced Special Topics in Ocean Engineering 1 - 4 Units

Terms offered: Prior to 2007
This series covers current topics of research interest in ocean engineering. The course content may vary semester to semester. Check with the department for current term topics.
Advanced Special Topics in Ocean Engineering: Read More [+]

MEC ENG 297 Engineering Field Studies 1 - 12 Units

Terms offered: Spring 2017, Fall 2016, Spring 2016
Supervised experience relative to specific aspects of practice in engineering. Under guidance of a faculty member, the student will work in an internship in industry. Emphasis is to attain practical experience in the field.
Engineering Field Studies: Read More [+]

MEC ENG 298 Group Studies, Seminars, or Group Research 1 - 8 Units

Terms offered: Spring 2018, Fall 2017, Spring 2017
Advanced studies in various subjects through special seminars on topics to be selected each year. Informal group studies of special problems, group participation in comprehensive design problems, or group research on complete problems for analysis and experimentation.
Group Studies, Seminars, or Group Research: Read More [+]

MEC ENG 299 Individual Study or Research 1 - 12 Units

Terms offered: Spring 2018, Fall 2017, Spring 2017
Investigations of advanced problems in mechanical engineering.
Individual Study or Research: Read More [+]

MEC ENG 375 Teaching of Mechanical Engineering at the University Level 1 - 6 Units

Terms offered: Spring 2018, Fall 2017, Spring 2017
Weekly seminars and discussions on effective teaching methods. Educational objectives. Theories of learning. The lecture and alternative approaches. Use of media resources. Student evaluation. Laboratory instruction. Curricula in mechanical engineering. Practice teaching. This course is open to Teaching Assistants of Mechanical Engineering.
Teaching of Mechanical Engineering at the University Level: Read More [+]

Faculty and Instructors

+ Indicates this faculty member is the recipient of the Distinguished Teaching Award.

Faculty

Alice M. Agogino, Professor. New product development, computer-aided design & databases, theory & methods, intelligent learning systems, information retrieval & data mining, digital libraries, multiobjective & strategic product, nonlinear optimization, probabilistic modeling, supervisory.
Research Profile

M. Reza Alam, Assistant Professor. Theoretical Fluid Dynamics, Nonlinear Wave Mechanics, Ocean and Coastal Waves Phenomena, Ocean Renewable Energy (Wave, Tide and Offshore Wind Energy), Nonlinear Dynamical Systems, Fluid Flow Control, ocean renewable energy.
Research Profile

Francesco Borrelli, Associate Professor. Automotive control systems, distributed and robust constrained control, manufacturing control systems, energy efficient buildings, model predictive control.
Research Profile

Van P. Carey, Professor. Mechanical engineering, non-equilibirum thermodynamics, statistical thermodynamics, microscale thermophysics, biothermodynamics, computer aided thermal design, thermodynamic analysis of green manufacturing.
Research Profile

James Casey, Professor. Continuum mechanics, finite elasticity, continuum thermodynamics, plasticity, theories of elastic-plastic materials, history of mechanics, dynamics.
Research Profile

Jyh-Yuan Chen, Professor. Computational modeling of reactive systems, turbulent flows, combustion chemical kinetics.
Research Profile

Chris Dames, Associate Professor.
Research Profile

David A. Dornfeld, Professor. Precision manufacturing processes, green and sustainable manufacturing, intelligent sensors and signal processing, mechanical engineering design, flexible/lean manufacturing systems, process modeling.
Research Profile

Carlos Fernandez-Pello, Professor. Biofuels, heat transfer, fire, combustion, ignition and fire spread, wildland fire spotting, smoldering and flaming, small scale energy generation.
Research Profile

Michael Frenklach, Professor. Silicon carbide, chemical kinetics; computer modeling; combustion chemistry; pollutant formation (NOx, soot); shock tube; chemical vapor deposition of diamond films; homogeneous nucleation of silicon, diamond powders; interstellar dust formation.
Research Profile

Costas P. Grigoropoulos, Professor. Heat transfer, laser materials processing, nano-manufacturing, energy systems and technology.
Research Profile

J. Karl Hedrick, Professor. Nonlinear control, automotive control systems, aircraft control.
Research Profile

Roberto Horowitz, Professor. Adaptive control, learning and nonlinear control, control of robot manipulators, computer mechatronics systems, micro-electromechanical systems (MEMS), intelligent vehicle, highways systems.
Research Profile

George C. Johnson, Professor. X-rays, plasticity, elasticity, instrumentation, sensors, acoustoelasticity, materials behavior, materials characterization, texture analysis, thin shells deformation, ultrasonic stress analysis.
Research Profile

Homayoon Kazerooni, Professor. Robotics, bioengineering, design, control systems, mechatronics, automated manufacturing, human-machine systems.
Research Profile

Tony M. Keaveny, Professor. Biomechanics of bone, orthopaedic biomechanics, design of artificial joints, osteoporosis, finite element modeling, clinical biomechanics.
Research Profile

Kyriakos Komvopoulos, Professor. Contact mechanics, fracture and fatigue of engineering materials, finite element modeling of surface contact and machining, thin-film processing and characterization, adhesion and fatigue of MEMS devices, plasma-assisted surface functionalization of biomaterials, surface patterning for cell adhesion and growth control, mechanics & tribology of magnetic recording devices, mechanotransduction effects in natural cartilage, microfibrous scaffolds for tissue engineering, surface nanoengineering techniques, tribology and mechanics of artificial joints.
Research Profile

Dorian Liepmann, Professor. Bioengineering, mechanical engineering, bioMEMS, biosensors, microfluid dynamics, experimental biofluid dynamics, hemodynamics, valvular heart disease, cardiac flows, arterial flows.
Research Profile

+ Dennis K. Lieu, Professor. Actuators, magnetics, acoustics, electromechanical devices, rolling elements, spindle motors, structural mechanics.
Research Profile

Liwei Lin, Professor. Nanotechnology, MEMS (microelectromechanical systems), NEMS (nanoelectromechanical systems), design and manufacturing of microsensors, microactuators, development of micromachining processes, silicon surface/bulk micromachining, micromolding process.
Research Profile

Fai Ma, Professor. Dynamical systems with inherent uncertainties, vibration, stochastic simulation.
Research Profile

Simo Aleksi Makiharju, Assistant Professor.

Samuel Mao, Associate Adjunct Professor. Mechanical engineering, processing, materials, energy transport, conversion and storage, nano, micro and meso scale, phenomena and devices, laser-material interactions, nonlinear science.
Research Profile

Philip Marcus, Professor. Algorithms, fluid mechanics, nonlinear dynamics, atmospheric flows, convection, ocean flows, numerical analysis, turbulence, planet formation, internal gravity waves, inertial waves, desalination.
Research Profile

Sara Mcmains, Associate Professor. Geometric and solid modeling, general purpose computation on the GPU (GPGPU), CAD/CAM, computational geometry, layered manufacturing, computer graphics and visualization, virtual prototyping, virtual reality.
Research Profile

Mohammad Mofrad, Professor. Nuclear pore complex and nucleocytoplasmic transport, mechanobiology of disease, cellular mechanotransduction, integrin-mediated focal adhesions.
Research Profile

Stephen Morris, Professor. Continuum mechanics, micro mechanics of solid-solid phase changes, interfacial phenomena (evaporating thin films), electroporation.
Research Profile

Grace O'Connell, Assistant Professor. Tissue engineering, biomechanics, intervertebral disc, cartilage.
Research Profile

+ Oliver O'Reilly, Professor. Continuum mechanics, vibrations, dynamics.
Research Profile

+ Andrew Packard, Professor. Design, robustness issues in control analysis, linear algebra, numerical algorithms in control problems, applications of system theory to aerospace problems, flight control, control of fluid.
Research Profile

Panayiotis Papadopoulos, Professor. Continuum mechanics, computational mechanics, contact mechanics, computational plasticity, materials modeling, solid mechanics, applied mathematics, dynamics of pseudo-rigid bodies.
Research Profile

+ Kameshwar Poolla, Professor. Cybersecurity, modeling, control, renewable energy, estimation, integrated circuit design and manufacturing, smart grids.
Research Profile

+ Lisa Pruitt, Professor. Tissue biomechanics, biomaterial science, fatigue and fracture micromechanisms, orthopedic polymers for total joint replacement, cardiovascular biomaterials, synthetic cartilage, acrylic bone cements, tribology of diamond and DLCs.
Research Profile

Robert O. Ritchie, Professor. Structural materials, mechanical behavior in biomaterials, creep, fatigue and fracture of advanced metals, intermetallics, ceramics.
Research Profile

S. Shankar Sastry, Professor. Computer science, robotics, arial robots, cybersecurity, cyber defense, homeland defense, nonholonomic systems, control of hybrid systems, sensor networks, interactive visualization, robotic telesurgery, rapid prototyping.
Research Profile

Omer Savas, Professor. Fluid mechanics.
Research Profile

Shawn Shadden, Associate Professor.

Lydia Sohn, Professor. Micro-nano engineering.
Research Profile

David Steigmann, Professor. Finite elasticity, mechanics, continuum, shell theory, variational methods, stability, surface stress, capillary phenomena, mechanics of thin films.
Research Profile

Andrew Szeri, Professor. Biomedical engineering, fluid dynamics, dynamical systems.
Research Profile

Hayden Taylor, Assistant Professor. Manufacturing, microfabrication, nanofabrication, semiconductor manufacturing, computational mechanics, nanoimprint lithography.
Research Profile

Masayoshi Tomizuka, Professor. Mechatronics, control systems theory, digital control, dynamic systems, mechanical vibrations, adaptive and optimal control, motion control.
Research Profile

Paul K. Wright, Professor. Mechanical and electrical engineering design, 3D-printing, manufacturing, energy systems, wireless sensor networks, sensors/MEMS/NEMS, IT systems, automated manufacturing & inspection.
Research Profile

Kazuo Yamazaki, Professor. Etc., micro custom diamond tool design and fabrication system, CNC machine tool control software and hardware system, ultrasonic milling, intelligent manufacturing systems, mechatronics control hardware and software for manufacturing processes and equipment, computer aided manufacturing system for five axis, milling - turning integrated machining process, nano/micro mechanical machining processes and equipment, precision metrology for nano/micro mechanical machining, Non-traditional manufacturing processes such as electric discharge machining, laser machining and electron beam finishing.
Research Profile

Ronald W. Yeung, Professor. Mathematical modeling, hydromechanics, naval architecture, numerical fluid mechanics, offshore mechanics, ocean processes, separated flows, wave-vorticity interaction, vortex-induced vibrations, stratified fluid flow, ocean energy, green ships, tidal energy, multi-hull flow physics, Helmholtz resonance, ship motion instabilities, tank resonance.
Research Profile

Xiang Zhang, Professor. Mechanical engineering, rapid prototyping, semiconductor manufacturing, photonics, micro-nano scale engineering, 3D fabrication technologies, microelectronics, micro and nano-devices, nano-lithography, nano-instrumentation, bio-MEMS.
Research Profile

Tarek Zohdi, Professor. Finite element methods, computational methods for advanced manufacturing, micro-structural/macro-property inverse problems involving optimization and design of new materials, modeling and simulation of high-strength fabric, modeling and simulation of particulate/granular flows, modeling and simulation of multiphase/composite electromagnetic media, modeling and simulation of the dynamics of swarms.
Research Profile

Lecturers

George Anwar, Lecturer.

+ Sara Beckman, Senior Lecturer SOE. Business, innovation, management, product development, operations strategy, environmental supply chain management.
Research Profile

Ayyana M. Chakravartula, Lecturer.

Robert Hennigar, Lecturer.

Marcel Kristel, Lecturer.

Chris Mccoy, Lecturer.

Christopher Layne Myers, Lecturer.

David B. Rich, Lecturer.

Michael Shiloh, Lecturer.

Julie Sinistore, Lecturer.

Kourosh (Ken) Youssefi, Lecturer.

Visiting Faculty

Shaochen Chen, Visiting Professor.

Emeritus Faculty

David M. Auslander, Professor Emeritus. Control systems, simulation, mechatronics, real time software, energy management, satellite attitude control, demand response, machine control.
Research Profile

David B. Bogy, Professor Emeritus. Fluid mechanics, mechanics in computer technology, tribology in hard-disk drives, laser measurement systems, numerical simulations, static and dynamic problems in solid mechanics.
Research Profile

Gilles M. Corcos, Professor Emeritus.

Hari Dharan, Professor Emeritus. Mechanical behavior, composite materials structures, manufacturing processes.
Research Profile

Robert W. Dibble, Professor Emeritus. Mechanical engineering, laser diagnostics.
Research Profile

Ralph Greif, Professor Emeritus. Heat and mass transfer, micro scale transport, fuel cells, cooling at the chip level, semiconductor wafers, materials processing, laser surface interactions, nuclear reactor safety, phase change, buoyancy transport, bio heat transfer, reacting flows.
Research Profile

Frank E. Hauser, Professor Emeritus. Mechanical engineering.
Research Profile

George Leitmann, Professor Emeritus. Economics, planning, dynamics systems, control theory, optimal control, dynamic games, & robust control, applications engineering, mechanical systems, business administrations, biological systems.
Research Profile

Alaa E. Mansour, Professor Emeritus. Structural reliability, safety, probabilistic dynamics of marine structures, strength of ship, offshore structures, development of design criteria.
Research Profile

C. D. Jr. Mote, Professor Emeritus.

Patrick J. Pagni, Professor Emeritus. Fire safety engineering, fire physics, fire modeling, post earthquake fires.
Research Profile

Boris Rubinsky, Professor Emeritus. Medical imaging, biotechnology, biomedical engineering, low temperature biology, micro and nano bionic technologies, electrical impedance tomography, bio-electronics, biomedical devices biomedical numerical analysis, bio-heat and mass transfer, electroporation light imaging.
Research Profile

Robert F. Sawyer, Professor Emeritus. Regulatory policy, air pollutant formation and control, motor vehicle emissions, combustion chemistry, motor fuels, health effects of air pollution.
Research Profile

Wilbur H. Somerton, Professor Emeritus.

Benson H. Tongue, Professor Emeritus. Nonlinear dynamics, acoustics, vibrations, modal analysis, numerical modeling.
Research Profile

George J. Trezek, Professor Emeritus.

Kent S. Udell, Professor Emeritus. Contaminated aquifer restoration, enhanced petroleum recovery, fluid mechanics, heat transfer, mass transfer, multiphase transport in porous media, microscale heat transfer.
Research Profile

Contact Information

Department of Mechanical Engineering

6141 Etcheverry Hall

Phone: 510-642-1338

Fax: 510-642-6163

Visit Department Website

Department Chair

Roberto Horowitz, PhD

6143 Etcheverry Hall

Phone: 510-643-7013

horowitz@berkeley.edu

Vice Chair, Graduate Study

Professor Lisa Pruitt

6185 Etcheverry Hall

Phone: 510-642-2595

Fax: 510-642-6163

lpruitt@me.berkeley.edu

Prospective Graduate School Inquiries

Sophia Chahal

6189 Etcheverry Hall

Phone: 510-642-4933

Fax: 510-642-6163

mech@me.berkeley.edu

Director of Academic and Student Affairs

Donna Craig

6187 Etcheverry Hall

Phone: 510-642-5085

Fax: 510-642-6163

dcraig@me.berkeley.edu

Graduate Student Affairs Adviser, MS & PhD

Yawo Dagbevi Akpawu

6189 Etcheverry Hall

Phone: 510-642-5084

Fax: 510-642-6163

yawo@me.berkeley.edu

Graduate Student Affairs Adviser, 5th Year MS & MEng

Isabel Blanco

6189 Etcheverry Hall

Phone: 510-642-6780

Fax: 510-642-6163

miblanco@berkeley.edu

Equity and Diversity Staff Adviser

Shareena Samson

6193 Etcheverry Hall

Phone: 510-642-4094

Fax: 510-642-6163

shareena@me.berkeley.edu

Back to Top