Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Summer 2017 8 Week Session, Spring 2017
This course and its follow-on course EE16B focus on the fundamentals of designing modern information devices and systems that interface with the real world. Together, this course sequence provides a comprehensive foundation for core EECS topics in signal processing, learning, control, and circuit design while introducing key linear-algebraic concepts motivated by application contexts. Modeling is emphasized in a way that deepens mathematical maturity, and in both labs and homework, students will engage computationally, physically, and visually with the concepts being introduced in addition to traditional paper/pencil exercises. The courses are aimed at entering students as well as non-majors seeking a broad foundation for the field.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
This course is a follow-on to Electrical Engineering 16A, and focuses on the fundamentals of designing and building modern information devices and systems that interface with the real world. The course sequence provides a comprehensive introduction to core EECS topics in circuit design, signals, and systems in an application-driven context. The courses are delivered assuming mathematical maturity and aptitude at roughly the level of having completed MATH 1A-1B, and are aimed at entering students as well as non-majors seeking a broad introduction to the field.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016, Fall 2015
The Freshman Seminar Program has been designed to provide new students with the opportunity to explore an intellectual topic with a faculty member in a small seminar setting. Freshman seminars are offered in all campus departments, and topics may vary from department to department and semester to semester.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2011
A Berkeley Electrical Engineering and Computer Sciences degree opens the door to many opportunities, but what exactly are they? Graduation is only a few years away and it's not too early to find out. In this seminar students will hear from practicing engineers who recently graduated. What are they working on? Are they working in a team? What do they wish they had learned better? How did they find their jobs?

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Fall 2016, Fall 2011
Freshman and sophomore seminars offer lower division students the opportunity to explore an intellectual topic with a faculty member and a group of peers in a small-seminar setting. These seminars are offered in all campus departments; topics vary from department to department and from semester to semester. Enrollment limits are set by the faculty, but the suggested limit is 25.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2013, Summer 2013 8 Week Session, Spring 2013
This course serves as an introduction to the principles of electrical engineering, starting from the basic concepts of voltage and current and circuit elements of resistors, capacitors, and inductors. Circuit analysis is taught using Kirchhoff's voltage and current laws with Thevenin and Norton equivalents. Operational amplifiers with feedback are introduced as basic building blocks for amplication and filtering. Semiconductor devices including diodes and MOSFETS and their IV characteristics are covered. Applications of diodes for rectification, and design of MOSFETs in common source amplifiers are taught. Digital logic gates and design using CMOS as well as simple flip-flops are introduced. Speed and scaling issues for CMOS are considered. The course includes as motivating examples designs of high level applications including logic circuits, amplifiers, power supplies, and communication links.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2013, Summer 2013 8 Week Session, Spring 2013
Using and understanding electronics laboratory equipment such as oscilloscope, power supplies, function generator, multimeter, curve-tracer, and RLC-meter. Includes a term project of constructing and testing a robot or other appropriate electromechanical device.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2016, Fall 2015, Spring 2015
Sophomore seminars are small interactive courses offered by faculty members in departments all across the campus. Sophomore seminars offer opportunity for close, regular intellectual contact between faculty members and students in the crucial second year. The topics vary from department to department and semester to semester. Enrollment limited to 15 sophomores.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Summer 2017 Second 6 Week Session, Spring 2017
Students take part in organized individual field sponsored programs with off-campus companies or tutoring/mentoring relevant to specific aspects and applications of computer science on or off campus. Note Summer CPT or OPT students: written report required. Course does not count toward major requirements, but will be counted in the cumulative units toward graduation.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
Group study of selected topics in electrical engineering, usually relating to new developments.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
Supervised independent study and research for students with fewer than 60 units completed.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2013, Summer 2013 10 Week Session, Summer 2013 8 Week Session
This course serves as an introduction to the principles of electrical engineering, starting from the basic concepts of voltage and current and circuit elements of resistors, capacitors, and inductors. Circuit analysis is taught using Kirchhoff's voltage and current laws with Thevenin and Norton equivalents. Operational amplifiers with feedback are introduced as basic building blocks for amplification and filtering. Semiconductor devices including diodes and MOSFETS and their IV characteristics are covered. Applications of diodes for rectification, and design of MOSFETs in common source amplifiers are taught. Digital logic gates and design using CMOS as well as simple flip-flops are introduced. Speed and scaling issues for CMOS are considered. The course includes as motivating examples designs of high level applications including logic circuits, amplifiers, power supplies, and communication links.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
This course covers the fundamental circuit and device concepts needed to understand analog integrated circuits. After an overview of the basic properties of semiconductors, the p-n junction and MOS capacitors are described and the MOSFET is modeled as a large-signal device. Two port small-signal amplifiers and their realization using single stage and multistage CMOS building blocks are discussed. Sinusoidal steady-state signals are introduced and the techniques of phasor analysis are developed, including impedance and the magnitude and phase response of linear circuits. The frequency responses of single and multi-stage amplifiers are analyzed. Differential amplifiers are introduced.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Fall 2016, Fall 2015
An introduction to the kinematics, dynamics, and control of robot manipulators, robotic vision, and sensing. The course covers forward and inverse kinematics of serial chain manipulators, the manipulator Jacobian, force relations, dynamics, and control. It presents elementary principles on proximity, tactile, and force sensing, vision sensors, camera calibration, stereo construction, and motion detection. The course concludes with current applications of robotics in active perception, medical robotics, and other areas.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016
This course is a sequel to Electrical Engineering C106A/Bioengineering C125, which covers kinematics, dynamics and control of a single robot. This course will cover dynamics and control of groups of robotic manipulators coordinating with each other and interacting with the environment. Concepts will include an introduction to grasping and the constrained manipulation, contacts and force control for interaction with the environment. We will also cover active perception guided manipulation, as well as the manipulation of non-rigid objects. Throughout, we will emphasize design and human-robot interactions, and applications to applications in manufacturing, service robotics, tele-surgery, and locomotion.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016, Fall 2009
Power conversion circuits and techniques. Characterization and design of magnetic devices including transformers, reactors, and electromagnetic machinery. Characteristics of bipolar and MOS power semiconductor devices. Applications to motor control, switching power supplies, lighting, power systems, and other areas as appropriate.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016, Spring 2015
Review of static electric and magnetic fields and applications; Maxwell's equations; transmission lines; propagation and reflection of plane waves; introduction to guided waves, microwave networks, and radiation and antennas. Minilabs on statics, transmission lines, and waves.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Fall 2016, Fall 2015
Fundamental principles of optical systems. Geometrical optics and aberration theory. Stops and apertures, prisms, and mirrors. Diffraction and interference. Optical materials and coatings. Radiometry and photometry. Basic optical devices and the human eye. The design of optical systems. Lasers, fiber optics, and holography.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
Continuous and discrete-time transform analysis techniques with illustrative applications. Linear and time-invariant systems, transfer functions. Fourier series, Fourier transform, Laplace and Z-transforms. Sampling and reconstruction. Solution of differential and difference equations using transforms. Frequency response, Bode plots, stability analysis. Illustrated by analysis of communication systems and feedback control systems.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Fall 2016, Spring 2016
Introduction to the basic principles of the design and analysis of modern digital communication systems. Topics include source coding, channel coding, baseband and passband modulation techniques, receiver design, and channel equalization. Applications to design of digital telephone modems, compact disks, and digital wireless communication systems. Concepts illustrated by a sequence of MATLAB exercises.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016, Spring 2015
This course focuses on the fundamentals of the wired and wireless communication networks. The course covers both the architectural principles for making these networks scalable and robust, as well as the key techniques essential for analyzing and designing them. The topics include graph theory, Markov chains, queuing, optimization techniques, the physical and link layers, switching, transport, cellular networks and Wi-Fi.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016, Spring 2015
Discrete time signals and systems: Fourier and Z transforms, DFT, 2-dimensional versions. Digital signal processing topics: flow graphs, realizations, FFT, chirp-Z algorithms, Hilbert transform relations, quantization effects, linear prediction. Digital filter design methods: windowing, frequency sampling, S-to-Z methods, frequency-transformation methods, optimization methods, 2-dimensional filter design.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
This course covers the fundamentals of probability and random processes useful in fields such as networks, communication, signal processing, and control. Sample space, events, probability law. Conditional probability. Independence. Random variables. Distribution, density functions. Random vectors. Law of large numbers. Central limit theorem. Estimation and detection. Markov chains.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016, Spring 2015
This course offers an introduction to optimization models and their applications, ranging from machine learning and statistics to decision-making and control, with emphasis on numerically tractable problems, such as linear or constrained least-squares optimization.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
Analysis and synthesis of linear feedback control systems in transform and time domains. Control system design by root locus, frequency response, and state space methods. Applications to electro-mechanical and mechatronics systems.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2010, Fall 2009, Spring 2009
Principles of massively parallel real-time computation, optimization, and information processing via nonlinear dynamics and analog VLSI neural networks, applications selected from image processing, pattern recognition, feature extraction, motion detection, data compression, secure communication, bionic eye, auto waves, and Turing patterns.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
Overview of electronic properties of semiconductor. Metal-semiconductor contacts, pn junctions, bipolar transistors, and MOS field-effect transistors. Properties that are significant to device operation for integrated circuits. Silicon device fabrication technology.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016, Spring 2015
This course is designed to give an introduction to, and overview of, the fundamentals of photovoltaic devices. Students will learn how solar cells work, understand the concepts and models of solar cell device physics, and formulate and solve relevant physical problems related to photovoltaic devices. Monocrystalline, thin film and third generation solar cells will be discussed and analyzed. Light management and economic considerations in a solar cell system will also be covered.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Fall 2016, Fall 2015
Overview of conventional electric power conversion and delivery, emphasizing a systemic understanding of the electric grid with primary focus at the transmission level, aimed toward recognizing needs and opportunities for technological innovation. Topics include aspects of a.c. system design, electric generators, components of transmission and distribution systems, power flow analysis, system planning and operation, performance measures, and limitations of legacy technologies.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016, Spring 2015
Overview of recent and potential future evolution of electric power systems with focus on new and emerging technologies for power conversion and delivery, primarily at the distribution level. Topics include power electronics applications, solar and wind generation, distribution system design and operation, electric energy storage, information management and communications, demand response, and microgrids.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
Single and multiple stage transistor amplifiers. Operational amplifiers. Feedback amplifiers, 2-port formulation, source, load, and feedback network loading. Frequency response of cascaded amplifiers, gain-bandwidth exchange, compensation, dominant pole techniques, root locus. Supply and temperature independent biasing and references. Selected applications of analog circuits such as analog-to-digital converters, switched capacitor filters, and comparators. Hardware laboratory and design project.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2016, Spring 2015, Fall 2014
Analysis and design of electronic circuits for communication systems, with an emphasis on integrated circuits for wireless communication systems. Analysis of noise and distortion in amplifiers with application to radio receiver design. Power amplifier design with application to wireless radio transmitters. Radio-frequency mixers, oscillators, phase-locked loops, modulators, and demodulators.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
Integrated circuit device fabrication and surface micromachining technology. Thermal oxidation, ion implantation, impurity diffusion, film deposition, expitaxy, lithography, etching, contacts and interconnections, and process integration issues. Device design and mask layout, relation between physical structure and electrical/mechanical performance. MOS transistors and poly-Si surface microstructures will be fabricated in the laboratory and evaluated.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2015, Fall 2014, Fall 2013
The modeling, analysis, and optimization of complex systems requires a range of algorithms and design software. This course reviews the fundamental techniques underlying the design methodology for complex systems, using integrated circuit design as example. Topics include design flows, discrete and continuous models and algorithms, and strategies for implementing algorithms efficiently and correctly in software. Laboratory assignments and a class project will expose students to state-of-the-art tools.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Fall 2016, Fall 2014
Biomedical imaging is a clinically important application of engineering, applied mathematics, physics, and medicine. In this course, we apply linear systems theory and basic physics to analyze X-ray imaging, computerized tomography, nuclear medicine, and MRI. We cover the basic physics and instrumentation that characterizes medical image as an ideal perfect-resolution image blurred by an impulse response. This material could prepare the student for a career in designing new medical imaging systems that reliably detect small tumors or infarcts.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2014, Fall 2013, Fall 2012
Laboratory exercises exploring a variety of electronic transducers for measuring physical quantities such as temperature, force, displacement, sound, light, ionic potential; the use of circuits for low-level differential amplification and analog signal processing; and the use of microcomputers for digital sampling and display. Lectures cover principles explored in the laboratory exercises; construction, response and signal to noise of electronic transducers and actuators; and design of circuits for sensing and controlling physical quantities.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2013, Spring 2012, Spring 2011
Laboratory exercises constructing basic interfacing circuits and writing 20-100 line C programs for data acquisition, storage, analysis, display, and control. Use of the IBM PC with microprogrammable digital counter/timer, parallel I/O port. Circuit components include anti-aliasing filters, the S/H amplifier, A/D and D/A converters. Exercises include effects of aliasing in periodic sampling, fast Fourier transforms of basic waveforms, the use of the Hanning filter for leakage reduction, Fourier analysis of the human voice, digital filters, and control using Fourier deconvolution. Lectures cover principles explored in the lab exercises and design of microcomputer-based systems for data acquisitions, analysis and control.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2015, Spring 2014, Spring 2013
Introduction to laboratory and field study of the biomechanics of animals and plants using fundamental biomechanical techniques and equipment. Course has a series of rotations involving students in experiments demonstrating how solid and fluid mechanics can be used to discover the way in which diverse organisms move and interact with their physical environment. The laboratories emphasize sampling methodology, experimental design, and statistical interpretation of results. Latter third of course devoted to independent research projects. Written reports and class presentation of project results are required.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2015
This is a lab course that covers the design of modern Application-Specific Integrated Circuits (ASICs). The labs lay the foundation of modern digital design by first setting-up the scripting and hardware description language base for specification of digital systems and interactions with tool flows. Software testing of digital designs is covered leading into a set of labs that cover the design flow. Digital synthesis, floorplanning, placement and routing are covered, as well as tools to evaluate design timing and power. Chip-level assembly is covered, instantiation of custom IP blocks: I/O pads, memories, PLLs, etc. The labs culminate with a project design – implementation of a 3-stage RISC-V processor with register file and caches.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Fall 2016, Fall 2015
This course will teach fundamentals of micromachining and microfabrication techniques, including planar thin-film process technologies, photolithographic techniques, deposition and etching techniques, and the other technologies that are central to MEMS fabrication. It will pay special attention to teaching of fundamentals necessary for the design and analysis of devices and systems in mechanical, electrical, fluidic, and thermal energy/signal domains, and will teach basic techniques for multi-domain analysis. Fundamentals of sensing and transduction mechanisms including capacitive and piezoresistive techniques, and design and analysis of micmicromachined miniature sensors and actuators using these techniques will be covered.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2015, Fall 2014, Fall 2013
This course introduces students to the basics of models, analysis tools, and control for embedded systems operating in real time. Students learn how to combine physical processes with computation. Topics include models of computation, control, analysis and verification, interfacing with the physical world, mapping to platforms, and distributed embedded systems. The course has a strong laboratory component, with emphasis on a semester-long sequence of projects.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016, Spring 2015
Design project course, focusing on application of theoretical principles in electrical engineering to control of a small-scale system, such as a mobile robot. Small teams of students will design and construct a mechatronic system incorporating sensors, actuators, and intelligence.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Fall 2015, Spring 2012
Topics will vary semester to semester. See the Electrical Engineering announcements.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
Thesis work under the supervision of a faculty member. A minimum of four units must be taken; the units may be distributed between one and two semesters in any way. To obtain credit a satisfactory thesis must be submitted at the end of the two semesters to the Electrical and Engineering and Computer Science Department archive. Students who complete four units and a thesis in one semester receive a letter grade at the end of H196A. Students who do not, receive an IP in H196A and must enroll in H196B.

Offered through: Electrical Engin and Computer Sci
Terms offered: Spring 2017, Spring 2016, Spring 2015
Thesis work under the supervision of a faculty member. A minimum of four units must be taken; the units may be distributed between one and two semesters in any way. To obtain credit a satisfactory thesis must be submitted at the end of the two semesters to the Electrical and Engineering and Computer Science Department archive. Students who complete four units and a thesis in one semester receive a letter grade at the end of H196A. Students who do not, receive an IP in H196A and must enroll in H196B.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Summer 2017 8 Week Session, Spring 2017
Students take part in organized individual field sponsored programs with off-campus companies or tutoring/mentoring relevant to specific aspects and applications of computer science on or off campus. Note Summer CPT or OPT students: written report required. Course does not count toward major requirements, but will be counted in the cumulative units toward graduation.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Spring 2017, Fall 2016
Group study of selected topics in electrical engineering, usually relating to new developments.

Offered through: Electrical Engin and Computer Sci
Terms offered: Fall 2017, Summer 2017 8 Week Session, Summer 2017 Second 6 Week Session
Supervised independent study. Enrollment restrictions apply.

Terms offered: Fall 2017, Spring 2017, Fall 2016
The Berkeley Seminar Program has been designed to provide new students with the opportunity to explore an intellectual topic with a faculty member in a small-seminar setting. Berkeley Seminars are offered in all campus departments, and topics vary from department to department and semester to semester.

Terms offered: Spring 2017, Spring 2016
The class provides students with an overview of the contemporary nuclear energy technology with emphasis on nuclear fission as an energy source. Starting with the basic physics of the nuclear fission process, the class includes discussions on reactor control, thermal hydraulics, fuel production, and spent fuel management for various types of reactors in use around the world as well as analysis of safety and other nuclear-related issues. This class is intended for sophomore NE students, but is also open to transfer students and students from other majors.

Terms offered: Fall 2017, Fall 2016, Fall 2015
Energetics and kinetics of nuclear reactions and radioactive decay, fission, fusion, and reactions of low-energy neutrons; properties of the fission products and the actinides; nuclear models and transition probabilities; interaction of radiation with matter.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Laboratory course in nuclear physics. Experiments will allow students to directly observe phenomena discussed in Nuclear Engineering 101. These experiments will give students exposure to (1) electronics, (2) alpha, beta, gamma radiation detectors, (3) radioactive sources, and (4) experimental methods relevant for all aspects of nuclear science. Experiments include: Rutherford scattering, x-ray fluorescence, muon lifetime, gamma-gamma angular correlations, Mossbauer effect, and radon measurements.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Basic science of radiation measurement, nuclear instrumentation, neutronics, radiation dosimetry. The lectures emphasize the principles of radiation detection. The weekly laboratory applies a variety of radiation detection systems to the practical measurements of interest for nuclear power, nuclear and non-nuclear science, and environmental applications. Students present goals and approaches of the experiements being performed.

Terms offered: Fall 2016, Fall 2015, Fall 2014
Introduction to medical imaging physics and systems, including x-ray computed tomography (CT), nuclear magnetic resonance (NMR), positron emission tomography (PET), and SPECT; basic principles of tomography and an introduction to unfolding methods; resolution effects of counting statistics, inherent system resolution and human factors.

Terms offered: Fall 2017, Fall 2016, Fall 2015
Effects of irradiation on the atomic and mechanical properties of materials in nuclear reactors. Fission product swelling and release; neutron damage to structural alloys; fabrication and properties of uranium dioxide fuel.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Components and material flowsheets for nuclear fuel cycle, waste characteristics, sources of radioactive wastes, compositions, radioactivity and heat generation; waste treatment technologies; waste disposal technologies; safety assessment of waste disposal.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Use of nuclear measurement techniques to detect clandestine movement and/or possession of nuclear materials by third parties. Nuclear detection, forensics, signatures, and active and passive interrogation methodologies will be explored. Techniques currently deployed for arms control and treaty verification will be discussed. Emphasis will be placed on common elements of detection technology from the viewpoint of resolution of threat signatures from false positives due to naturally occurring radioactive material. Laboratory will involve experiments conducted in the Nucleonics Laboratory featuring passive and active neutron signals, gamma ray detection, fission neutron multiplicity, and U and Pu isotopic identification and age determination. Students should be familiar with alpha, beta, gamma, and neutron radiation and basic concepts of nuclear fission.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Neutron interactions, nuclear fission, and chain reacting systematics in thermal and fast nuclear reactors. Diffusion and slowing down of neutrons. Criticality calculations. Nuclear reactor dynamics and reactivity feedback. Production of radionuclides in nuclear reactors.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Computational methods used to analyze radiation transport described by various differential, integral, and integro-differential equations. Numerical methods include finite difference, finite elements, discrete ordinates, and Monte Carlo. Examples from neutron and photon transport; numerical solutions of neutron/photon diffusion and transport equations. Monte Carlo simulations of photon and neutron transport. An overview of optimization techniques for solving the resulting discrete equations on vector and parallel computer systems.

Terms offered: Fall 2017, Fall 2016, Fall 2015
Energy conversion in nuclear power systems; design of fission reactors; thermal and structural analysis of reactor core and plant components; thermal-hydraulic analysis of accidents in nuclear power plants; safety evaluation and engineered safety systems.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Interaction of radiation with matter; physical, chemical, and biological effects of radiation on human tissues; dosimetry units and measurements; internal and external radiation fields and dosimetry; radiation exposure regulations; sources of radiation and radioactivity; basic shielding concepts; elements of radiation protection and control; theories and models for cell survival, radiation sensitivity, carcinogenesis, and dose calculation.

Terms offered: Fall 2017, Fall 2015, Fall 2014
Project-based class for design and licensing of nuclear facilities, including advanced reactors. Elements of a project proposal. Regulatory framework and use of deterministic and probabilistic licensing criteria. Siting criteria. External and internal events. Identification and analysis of design basis and beyond design basis events. Communication with regulators and stakeholders. Ability to work in and contribute to a design team.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Design of various fission and fusion power systems and other physically based applications. Each semester a topic will be chosen by the class as a whole. In addition to technology, the design should address issues relating to economics, the environment, and risk assessment.

Terms offered: Spring 2010, Spring 2009, Spring 2008
A systems approach to the development of procedures for nuclear medicine and radiation therapy. Each semester a specific procedure will be studied and will entail the development of the biological and physiological basis for a procedure, the chemical and biochemical characteristics of appropriate drugs, dosimetric requirements and limitations, the production and distribution of radionuclides and/or radiation fields to be applied, and the characteristics of the instrumentation to be used.

Terms offered: Fall 2015, Fall 2013, Fall 2011
Methodological approaches for the quantification of technological risk and risk based decision making. Probabilistic safety assessment, human health risks, environmental and ecological risk analysis.

Terms offered: Fall 2017, Fall 2016, Fall 2015
Introduction to energy production by controlled thermonuclear reactions. Nuclear fusion reactions, energy balances for fusion systems, survey of plasma physics; neutral beam injection; RF heating methods; vacuum systems; tritium handling.

Terms offered: Fall 2017, Spring 2017, Fall 2016
Supervised research. Students who have completed three or more upper division courses may pursue original research under the direction of one of the members of the staff. A final report or presentation is required. A maximum of three units of H194 may be used to fulfill a technical elective requirement in the Nuclear Engineering general program or joint major programs.

Terms offered: Fall 2017, Spring 2017, Fall 2016
Group studies of selected topics.

Terms offered: Fall 2017, Summer 2017 8 Week Session, Spring 2017
Supervised independent study. Enrollment restrictions apply; see the Introduction to Courses and Curricula section of this catalog.

Terms offered: Prior to 2007
Supervised independent study. Please see section of the for description and prerequisites.

Terms offered: Spring 2017
Overview of the elements of nuclear technology in use today for the production of energy and other radiation applications. Emphasis is on nuclear fission as an energy source, with a study of the basic physics of the nuclear fission process followed by detailed discussions of issues related to the control, radioactivity management, thermal energy management, fuel production, and spent fuel management. A discussion of the various reactor types in use around the world will include analysis of safety and nuclear proliferation issues surrounding the various technologies. Case studies of some reactor accidents and other nuclear-related incidents will be included.

Terms offered: Spring 2016, Spring 2015, Spring 2014
Interaction of gamma rays, neutrons, and charged particles with matter; nuclear structure and radioactive decay; cross sections and energetics of nuclear reactions; nuclear fission and the fission products; fission and fusion reactions as energy sources.

Terms offered: Fall 2015, Fall 2013, Fall 2011
Advanced concepts in the detection of ionizing radiation relevant for basic and applied sciences, nuclear non-proliferation, and homeland security. Concepts of signal generation and processing with advantages and drawbacks of a range of detection technologies. Laboratory comprises experiments to compare conventional analog and advanced digital signal processing, information generation and processing, position-sensitive detection, tracking, and imaging modalities.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Physical aspects and computer simulation of radiation damage in metals. Void swelling and irradiation creep. Mechanical analysis of structures under irradiation. Sputtering, blistering, and hydrogen behavior in fusion reactor materials.

Terms offered: Spring 2016, Spring 2014, Spring 2011
Structural metals in nuclear power plants; properties and fabrication of Zircaloy; aqueous corrosion of reactor components; structural integrity of reactor components under combined mechanical loading, neutron irradiation, and chemical environment.

Terms offered: Spring 2014, Spring 2013, Spring 2012
Multi-barrier concept; groundwater hydrology, mathematical modeling of mass transport in heterogeneous media, source term for far-field model; near-field chemical environment, radionuclide release from waste solids, modeling of radionuclide transport in the near field, effect of temperature on repository performance, effect of water flow, effect of geochemical conditions, effect of engineered barrier alteration; overall performance assessment, performance index, uncertainty associated with assessment, regulation and standards.

Terms offered: Spring 2016, Spring 2015, Spring 2013
This course is intended for graduate students interested in acquiring a foundation in nuclear fuel cycle with topics ranging from nuclear-fuel reprocessing to waste treatment and final disposal. The emphasis is on the relationship between nuclear-power utilization and its environmental impacts. The goal is for graduate engineering students to gain sufficient understanding in how nuclear-power utilization affects the environment, so that they are better prepared to design an advanced system that would result in minimized environmental impact. The lectures will consist of two parts. The first half includes mathematical models for individual processes in a fuel cycle, such as nuclear fuel reprocessing, waste solidification, repository performance, and nuclear transmutation in a nuclear reactor. In the second half, these individual models are integrated, which enables students to evaluate environmental impact of a fuel cycle.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Use of nuclear measurement techniques to detect clandestine movement and/or possession of nuclear materials by third parties. Nuclear detection, forensics, signatures, and active passive interrogation methodologies will be explored. Techniques currently deployed for arms control and treaty verification will be discussed. Emphasis will be placed on common elements of detection technology from the viewpoint of resolution of threat signatures from false positives due to naturally occurring radioactive material. Laboratory will involve experiments conducted in the Nucleonics Laboratory featuring passive and active neutron signals, gamma ray detection, fission neutron multiplicity, and U and Pu isotopic identification and age determination. Students should be familiar with alpha, beta, gamma, and neutron radiation and basic concepts of nuclear fission.

Terms offered: Fall 2017, Fall 2015, Fall 2013
Fission characteristics; neutron chain reactions, neutron transport and diffusion theory; reactor kinetics; multigroup methods, fast and thermal spectrum calculations, inhomogeneous reactor design, effects of poisons and fuel depletion.

Terms offered: Fall 2016, Fall 2015, Fall 2014
Computational methods used to analyze nuclear reactor systems described by various differential, integral, and integro-differential equations. Numerical methods include finite difference, finite elements, discrete ordinates, and Monte Carlo. Examples from neutron and photon transport, heat transfer, and thermal hydraulics. An overview of optimization techniques for solving the resulting discrete equations on vector and parallel computer systems.

Terms offered: Fall 2016, Fall 2014, Fall 2012
Fluid dynamics and heat transfer; thermal and hydraulic analysis of nuclear reactors; two-phase flow and boiling; compressible flow; stress analysis; energy conversion methods.

Terms offered: Fall 2017
Radiobiology is concerned with the action of ionizing radiation on biological tissues and living organisms. It combines two disciplines: radiation physics and biology. Radiobiology combines our understanding of ionizing radiation and molecular biology, and is a required knowledge for health physicists, radiation biologists and medical physicists. This course will provide such knowledge for a diverse group of students with need in either disciplines. This course represents one of the requisites for the Joint UC Berkeley-UC San Francisco Medical Physics Certificate Program.

Terms offered: Fall 2016, Fall 2015, Fall 2013
Principles and techniques of economic analysis to determine capital and operating costs; fuel management and fuel cycle optimization; thermal limits on reactor performance, thermal converters, and fast breeders; control and transient problems; reactor safety and licensing; release of radioactivity from reactors and fuel processing plants.

Terms offered: Fall 2017, Fall 2015, Fall 2014
Project-based class for design and licensing of nuclear facilities,including advanced reactors. Elements of a project proposal. Regulatory framework and use of deterministic and probabilistic licensing criteria. Siting criteria. External and internal events. Identification and analysis of design basis and beyond design basis
events. Communication with regulators and stakeholders. Ability to work in and contribute to a design team.

Terms offered: Fall 2015, Fall 2013, Fall 2011
Principles and methodological approaches for the quantification of technological risk and risk-based decision making.

Terms offered: Spring 2017, Spring 2016, Spring 2015
Engineering and design of fusion systems. Introduction to controlled thermonuclear fusion as an energy economy, from the standpoint of the physics and technology involved. Case studies of fusion reactor design. Engineering principles of support technology for fusion systems.

Terms offered: Spring 2016, Spring 2014, Spring 2011
Introduction to warm and hot magnetized plasmas. Single particle motion in electric and magnetic fields. Collective particle oscillations, waves and instabilities. Magnetohydrodynamic equilibria, stability and transport. Magnetically confined plasmas for controlled fusion. Space plasmas.

Terms offered: Fall 2017, Fall 2015, Fall 2013, Fall 2011
Topics in this course will include the latest technology of various types of ion and electron sources, extraction and formation of charge particle beams, computer simulation of beam propagation, diagnostics of ion sources and beams, and the applications of beams in fusion, synchrotron light source, neutron generation, microelectronics, lithography, and medical therapy. This is a general accelerator technology and engineering course that will be of interest to graduate students in physics, electrical engineering, and nuclear engineering.

Terms offered: Spring 2017, Spring 2016, Spring 2015
The course will review the origins and evolution of nuclear energy, how it has been applied for both peaceful and military purposes, and the current and prospective challenges it presents. The purpose of the course is to educate students on the policy roots and technological foundations of nuclear energy and nuclear weapons so they are positioned to make original contributions to the field in their scholarly and professional careers.

Terms offered: Fall 2017, Spring 2016, Fall 2014
Special topics in applied nuclear physics. Topics may include applied nuclear reactions and instrumentation, bionuclear and radiological physics, and subsurface nuclear technology, among other possibilities. Course content may vary from semester to semester depending upon the instructor.

Terms offered: Spring 2016, Spring 2015, Spring 2013
Special topics in nuclear materials and chemistry. Topics may include advanced nuclear materials and corrosion. Course content may vary from semester to semester depending upon the instructor.

Terms offered: Summer 2002 10 Week Session
Special topics in nuclear energy. Topics may include fission reactor analysis and engineering, nuclear thermal hydraulics, and risk, safety and large-scale systems analysis. Course content may vary from semester to semester depending on the instructor.

Terms offered: Fall 2015, Fall 2014, Summer 2007 3 Week Session
Special topics in nuclear non-proliferation. Topics may include homeland security and nuclear policy, and nuclear fuel cycle and waster management. Course content may vary from semester to semester depending on the instructor.

Terms offered: Spring 2017, Fall 2015, Fall 2014
Special topics in environmental aspects of nuclear energy. Lectures on special topics of interest in environmental impacts of nuclear power utilizations, including severe accidents. The course content may vary from semester to semester, and will be announced at the beginning of each semester.

Terms offered: Summer 2007 10 Week Session, Summer 2007 3 Week Session
Special topics in fusion and plasma physics. Topics may include laser, particle bean and plasma technologies, fusion science and technology, and accelerators. Course content may vary
from semester to semester depending upon the instructor.

Terms offered: Fall 2017, Spring 2017, Fall 2016
Presentations on current topics of interest in nuclear technology by experts from government, industry and universities. Open to the campus community.

Terms offered: Fall 2017, Spring 2017, Fall 2016
Seminars in current research topics in nuclear engineering: Section 1 - Fusion; Section 2 - Nuclear Waste Management; Section 3 - Nuclear Thermal Hydraulics; Section 4 - Nuclear Chemistry; Section 6 - Nuclear Materials; Section 7 - Fusion reaction design; Section 8 - Nuclear Instrumentation.

Terms offered: Fall 2017, Spring 2017, Fall 2016
Investigation of advanced nuclear engineering problems.

Terms offered: Summer 2017 8 Week Session, Summer 2016 8 Week Session, Summer 2015 8 Week Session
Investigation of advanced nuclear engineering problems.

Terms offered: Fall 2017, Fall 2016, Fall 2015
This course is designed to acquaint new teaching assistants with the nature of graduate student instruction in courses in the department of Nuclear Engineering. Discussion, practice, and review of issues relevant to the teaching of nuclear engineering. Effective teaching methods will be introduced by experienced GSIs and faculty.

Terms offered: Fall 2017, Spring 2017, Fall 2016
Individual study in consultation with the major field adviser, intended to provide an opportunity for qualified students to prepare themselves for the various examinations required of candidates for the Ph.D.